Can one monitor be seen and recorded on both computers? 15

There are several ways, the first most feasible way is to use the computer on the second floor as a server, and then the computer on your fourth floor can remotely control the computer on the second floor, and you can realize that the computer on the fourth floor is the same as the one on the second floor, and you can see these three monitoring and admission.

The second method, if you don't want both computers to be on, look at the back-end of your monitor, what hardware combination is used to receive the signal, such as limited transmission mode and wireless transmission channel composed of transmitter and receiver, in addition to the power line, control line, etc., which is used to transmit the front-end signal to the back-end, and provide power and control signals for the front-end camera and decoder.

Take a look at the instructions for using your monitor, but the first method is the most convenient, which is that there is a problem, you have to turn on both computers.

Second, set up the network IP, which is similar to the IP of the LAN workstation.

Third, meet the requirements of the first and second articles.

The above does not support the Internet, and you need to set the domain name resolution for Internet access.

Same as the computer setup on the second floor.

There is a client or IE

You can connect all the cameras to a DVR with a network.

Pull a network cable from the router to the DVR

You can monitor and admit from anywhere you have internet access.

It doesn't matter if your computer is turned on or not, this can also save electricity.

It can also be watched on your TV.

What do you not understand, it seems that the electric 02938831276 Xindun intelligent security.

Yes, use the LAN to do network transmission, set the IP on the monitoring software on the monitoring host on the second floor, and then set it up with the client of the monitoring software on the fourth floor.

It's not okay to set up a workgroup.

Determine the unique IP address within a local area network to ensure that it can demand traffic. You can see it!

Use a VGA switch to connect.

1. At present, the first signal output of the computer and DVR and the input interface of the display have HDMI, DVI, DP, VGA and other interfaces, but they are all equipped with VGA interfaces, so they can be connected with VGA switches;

2. The VGA switch is generally N in and one out, that is, there are N wheel VGA signal input interfaces and one VGA output interface. Now a computer and a DVR share a monitor, so choose a two-in and one-out can meet the requirements;

3. Connect the VGA output port on the computer graphics card to the Video In1 port of the switcher with a VGA signal cable, connect the VGA output port on the hard disk recording key retarder to the Video In2 port of the switcher with a VGA signal cable, and connect the VGA input port on the monitor to the Video Out port of the switcher with a VGA signal cable;

4. When in use, press the "1" button on the front panel of the switcher if you need to display the screen of the computer, and press the "2" button on the front panel of the switcher if you need to display the screen of the DVR.

Hello, dear, I am inquiring about it for you, please be patient.

Yes, as long as the IP address is set to be different, the two recorders can be used at the same time.

The network cable can be connected in **.

Got up, dear.

What do you mean? Sorry, I made a typo, yes.

Is it okay if the number of channels is different?

Is the first VCR still designed?

It's okay to have different channels.

For example, you want to add one webcam to three recorders.

Then the auxiliary video recorder can still record normally after the main video recorder is powered off.

If the power supply of the auxiliary camera is not affected, it can still be used normally.

If the footage is saved, you can still watch the playback, dear.

Hello, glad to answer for you, how two video recorders are displayed on one monitor at the same time. There are two ways to display two video recorders on a single segment of the friend display at the same time:1

Use Splitter: Use the splitter to distribute the output signals from two recorders to the same noisy display. Splitters have multiple inputs and one output, and they can combine multiple signals into a single output.

Dear, I hope it can help you and wish you a happy life! 

Dear, to achieve two recorders to display on one monitor at the same time, you need to use a switcher or converter. One way to do this is to use a switcher. **A switcher is a device that can switch two or more input signals to one output signal.

You'll need to connect the two recorders to the switcher's different input ports via cables, and then connect the switcher's output to the monitor's input. With the switcher, you can easily select and switch which recorder you want to output from. Another way is to use a converter.

**The converter will accept signals from both recorders and combine them into a single signal output to a single input port. In this way, you can connect a signal directly to the display and simultaneously** the output of two video recorders. Either way, you'll need to choose a switcher or converter that suits your device model and the type of signal input and output you need.

Now electronic technology products are used in more and more places, and more and more monitoring equipment is used, at this time, the easiest way to connect two monitors with a surveillance video recorder is to buy a one-to-two full-screen display, so that you can connect two display wires at the same time on this screen-through-screen device, connect to the two displays, and then, connect a wire from the main chassis to the same screen, so that you can display the image on the two displays at the same time.

Hello dear, the computer and the surveillance video recorder share a monitor, you can connect it in the following ways:1Using the switcher:

You can use a switcher to connect the output ports of your computer and surveillance recorders, such as VGA HDMI DVI, to the switcher's input, and then connect the switcher's output to the monitor. When it is necessary to switch the input signal, this can be achieved by means of a switcher. 2.

Use a cord remover: You can use a cord remover to connect the output ports such as VGA HDMI DVI of your computer and surveillance video recorder to the input port of the wire remover, and then connect the output port of the wire remover to the monitor. In this way, two signals can be output at the same time, but you need to pay attention to the quality and resolution of the signal.

3.Use an all-in-one adapter: You can use an all-in-one adapter to connect the outputs of your computer and surveillance video recorder to the all-in-one adapter, and then connect the output of the all-in-one adapter to the monitor.

In this way, a variety of interfaces can be converted, but you need to pay attention to the compatibility and signal quality of the adapter.

1. Open the browser and enter the IP address of the monitoring host in the browser address bar.

2. Enter the login account and password. Connect to the monitoring host.

3. After setting, you can view the monitoring.

4. The second computer can also be viewed by opening it according to the above operation.

It's easy to connect to the local area network, share the hard disk of the monitored computer, and you can watch the surveillance video in your machine. Click on the inventory attribute you want to share, and click on the sharing as prompted. XP also needs to open a temporary account, enter the control panel, click on the user account, click on the guest, and click on the account to open the account.

It's very simple, buy a router to do LAN, and the router must be bound with a domain name! It is also possible to do remotely! It's very simple, as long as you turn on the router, it's about more than 100 yuan.

You haven't lost the monitoring software CD, there is a network version of the client in it, install it, enter the other party's IP and then fill in the account password to log in**The other party's video,The other party can't turn it off.

The computer upstairs can be controlled with network monitoring software. Software such as radmin, netop, red spider and so on, are monitored through cameras. However, if the computer upstairs is not turned on, you will have to use another software to wake it up.

If the upstairs power plug has been unplugged, it will no longer be possible to control the upstairs computer.

If you just want to monitor what people are doing upstairs, you can install a camera upstairs and lead it to the computer downstairs.

How is your surveillance system connected?