Help: My monitor looks like it s going to hang birds???

Updated on number 2024-05-08
19 answers
  1. Anonymous users2024-02-09

    The display is damp, and there will be blurring and squeaky high-voltage discharge sound when it is just turned on, which is a problem for almost all electrical appliances that use picture tubes, because of many reasons such as dust, humid air, and aging devices.

    After a while of turning on the machine, the temperature in the machine rises,This abnormality will be reduced or disappeared,It will not affect the normal use,If the area is not humid all year round,Ignore it,You can also remove the dust in the display。

    The one that glows inside is the filament of the picture tube that emits light, and if this thing doesn't emit light, there is no electron beam emission, and the display screen goes black.

    The above your monitor is just damp.,Don't worry too much about hanging.,Besides, it's been used for so many years.,It's nothing to hang up and change to another one.,Hehe,Put your heart in your stomach.,It's okay.。

  2. Anonymous users2024-02-08

    The tube socket is broken, and the sound is fire.

  3. Anonymous users2024-02-07

    Antivirus in Safe Mode with Kaspersky.

  4. Anonymous users2024-02-06

    Rising Antivirus will definitely do.

  5. Anonymous users2024-02-05

    Nothing too similar ......Airplanes rely on high speed to generate lift, while birds rely on flapping wings to generate lift......

    To say that they are similar, they can only be said to fly (although in different ways).

  6. Anonymous users2024-02-04

    The similarity is only somewhat similar to the aerodynamic characteristics of birds when gliding.

    The other is the hollow structure.

    The bird's skeleton is hollow.

  7. Anonymous users2024-02-03

    Wings = wings (when the bird is circling).

    Tail = (vertical) tail.

    Feet = landing gear.

  8. Anonymous users2024-02-02

    19-inch second-hand flat ** (yuan): repair the closed chop 20-30 sell 30-50 (10-20 of the tattered potato state) buy 50-80 knots and the theory is not necessary to repair.

  9. Anonymous users2024-02-01

    The old-fashioned monitor and the new monitor are more picture tubes, electron guns and other screen display equipment than the new monitor, and the rest of the structure is the same as the motherboard and power board. If there is a dripping sound and the indicator light is not on, it should be a matter of the Qi liquid motherboard.

    But as for repair, the old display has no value for repair, and all the accessories are aging, even if it is repaired, it is the maintenance cost within 50.

    Now that we have entered the era of LCD monitors, let's replace it with a new one.

  10. Anonymous users2024-01-31

    The sound of ticking is an ambush leaking your chassis alarm, your computer hardware is problematic, you have to take it apart to see, you always shoot the computer monitor because your screen has been missing and shaken it, the monitor is not bright will be your plug not plugged in, see if the computer cable has Zen noise is not loose, if it is not loose, then you will be able to change the monitor, the repair cost is not easy to say, overhaul will be hundreds.

  11. Anonymous users2024-01-30

    It's better to replace the display repair Now the display is very cheap There will be a lot of problems with the repaired display screen, so it's better to buy a new one.

  12. Anonymous users2024-01-29

    Wings = wings (when the bird is circling).

    Tail = (vertical) tail.

    Feet = landing gear.

  13. Anonymous users2024-01-28

    The plane is afraid of birds The plane is in flight, its engine needs to inhale a lot of air and wind, if there is a bird in the sky, because the wind is too strong, the bird will be sucked into the engine together As a result, the bird is broken, but the engine will be damaged by such a small life, and eventually, the plane will fall from a high altitude

  14. Anonymous users2024-01-27

    It is normal to have acne during puberty, and people who do not grow it rarely drop. Tens of millions of watches are crowded, and the consequences are very serious.

    If you have the money, go to the beauty salon. Ask for it, and she won't ask for your money drops.

  15. Anonymous users2024-01-26

    The order of life should not be chaotic, and eat less fried food.

  16. Anonymous users2024-01-25

    This is the egg of a bald bulbul with purplish-red spots.

  17. Anonymous users2024-01-24

    Cuckoo eggs with purple spots on them.

  18. Anonymous users2024-01-23

    It is the power overload protection of the display, and most of the problems are in the line circuit, output tubes, and high-voltage packets. Maintenance also has to be more than 50 yuan, if you don't want to change the LCD, buy a second-hand it, not more than 100 yuan, my Philips CRT is easy to use last year only sold for 40 yuan. It seems that there is really no value in repairing.

  19. Anonymous users2024-01-22

    It's a turtledove, I've seen it.

Related questions
17 answers2024-05-08

If there is a white screen failure, it is basically certain that there are more problems with the power supply circuit of the LCD screen, that is, the poor voltage. >>>More

15 answers2024-05-08

CRT monitors? Is it a flat screen display?

Maybe something is wrong with the monitor. Jitter. Maybe it's a virtual welding,It is recommended that you go to the monitor maintenance outlets and let someone help you repair the welding,If you want to confirm whether it is the fault I said, when the fault looms, vigorously pat your display shell,See if the fault comes out with your beating rhythm? >>>More

6 answers2024-05-08

Look at your configuration sheet, you know, your graphics card is fake, brush the BIOS to flash out, hehehe. >>>More

12 answers2024-05-08

The standard resolution of a 19-inch 16:10 ratio LCD monitor is 1440 900. >>>More

8 answers2024-05-08

Peripherals (such as printers, scanners, UPS power supplies, modems, etc.), if the display power supply is not connected to the host, turn on the monitor power first, and then turn on the host; The shutdown sequence is reversed: the host is turned off first, and then the peripherals are turned off. The reason for this is to minimize damage to the host. >>>More