Is aluminum veneer scratch resistant? When cutting aluminum plates, how to avoid scratches

Aluminum veneer can be fireproof. The fire rating is A2. Aluminum veneer refers to the building decoration material formed by chromization and other treatments, and then processed by fluorocarbon spraying technology.

Fluorocarbon coatings mainly refer to polyvinylidene fluoride resin (kanar500), which are divided into three types: primer, topcoat and varnish. The spraying process is generally divided into two, three or four coats. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, has excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, and long service life.

Features: 1. Light weight, good rigidity, high strength, thick aluminum plate weighs 8kg per square plate, tensile strength 100-280n mm2 2, good durability and corrosion resistance. PVDF fluorocarbon paint based on Kynar-500 and HYLUR500 can be used for 25 years without fading.

3. Good manufacturability. Using the process of processing first and then painting, the aluminum plate can be processed into a variety of complex geometries such as plane, arc and spherical surface. 4. Uniform coating and diverse colors.

The advanced electrostatic spraying technology makes the adhesion between the paint and the aluminum plate uniform, the color is diverse, and the choice space is large. 5. It is not easy to stain and easy to clean and maintain. The non-adhesive nature of the fluorine coating film makes it difficult for contaminants to adhere to the surface and has good cleanability.

6. Convenient and fast installation and construction. The aluminum plate is formed in the factory, and it can be fixed on the skeleton without cutting at the construction site. 7. It can be reused, which is conducive to environmental protection.

Aluminum plate can be 100%**, different from glass, stone, ceramics, aluminum-plastic panels and other decorative materials, ** high residual value.

1) As a high-grade decorative material, the production and processing level of various fluorocarbon sprayed aluminum veneer manufacturers in China is quite different. Before ordering, special attention should be paid to the inspection of the manufacturer, its production capacity and scale, engineering performance, and its technical design ability. Do not use low-level, small-scale processing manufacturers because of low cost, otherwise it will bring great difficulties to construction and management, and the consequences will be irreparable economic losses.

2) As an important process before the processing of fluorocarbon sprayed aluminum veneer - on-site data measurement, it is recommended to use infrared rangefinder for measurement. If the traditional tape measure is used for measurement, there will be measurement errors, which will have a very adverse impact on the aluminum plate that requires close-seam splicing.

3) In the processing of fluorocarbon sprayed aluminum veneer, all aluminum plates should not be processed at one time, and the last aluminum plate and corner plate in each installation area should not be processed temporarily, and after the installation of all fluorocarbon sprayed aluminum veneer in the area is completed, the field data measurement should be carried out again to obtain accurate size reprocessing to avoid unnecessary rework and economic losses.

4) Although fluorocarbon sprayed aluminum veneer is a kind of metal decorative board, its fluorocarbon spray coating is easy to scratch. Therefore, in addition to requiring the manufacturer to bring a protective film to the aluminum plate, the handling and installation process should also focus on avoiding scratches and heavy impacts, otherwise it will seriously affect the overall appearance of the aluminum plate.

5) For the installation method of fluorocarbon sprayed aluminum veneer paste, the most common and most difficult quality problem to solve is the uneven seam between the blocks, which should be paid enough attention. In addition to paying attention to the uniform and consistent thickness of the adhesive during the construction process, the temporary fixing measures shall not be removed too early, usually not less than 12h.

6) The fluorocarbon sprayed aluminum veneer with paste installation should be made of glass magnesium board or large core board with waterproof performance as the base board, and the paper stone blue board should not be used, the main reasons are: first, the paper gypsum board itself has low strength and is not firmly bonded with the aluminum plate; Second, the gypsum board is not waterproof, and there are usually various water supply and drainage pipelines hidden in the ceiling, once there is local leakage, it will cause the overall fall off of the aluminum plate.

Aluminum veneer can't be scratch-proof, aluminum veneer is used for decoration and belongs to building materials. Aluminum alloy products, but even if the design is good-looking, some people have itchy hands and want to scratch it, or be bumped by other things, there are still such situations.

A: The fact that aluminum veneer should not be scratch-proof.

Summary. 1.When handling, workers need to wear gloves to avoid sweat leaving on the surface of the aluminum plate, and surface corrosion and oxidation may occur after a long time During machining, especially when bending the shearing plate, it is necessary to pay attention to it, and if the surface quality is high, it is recommended to paste a protective film.

2.The hardness of aluminum plate is softer than that of other metals, and slight friction will cause subtle scratches on the surface, so we should protect the surface of aluminum plate when transporting, handling, and processing it to avoid scratches.

When cutting aluminum plates, how to avoid scratches

Dear, glad for your question. The specific operation steps to avoid drawing the bilu injury belt are as follows: 1

It is protected by PE protective film or paper to avoid scratches and spots caused by friction between the aluminum sheet. 2.At the same time, it must be firmly ensured to avoid the problem of sliding of the aluminum plate in transportation, which is more likely to cause scratches.

Dear, the following are some introductions and supplementary instructions about aluminum plates.

1.When handling, workers need to wear gloves to avoid sweat leaving on the surface of the aluminum plate, and the surface may be corroded and oxidized after a long time. 2.

The hardness of aluminum plate is softer than that of other metals, and slight friction will cause subtle scratches on the surface, so we should protect the surface of aluminum plate when transporting, handling, and processing it to avoid scratches. Lead talk rush.

When cutting aluminum plates, how to avoid scratches

Hello, dear, I am glad to answer for you, you can prevent it like this:1When cutting aluminum plates, goggles and earplugs should be used to prevent noise and debris from flying away.

2.Choose the right blade and try to use high-quality blades to ensure the cutting effect. 3.

Set the aluminum bench board on a stable platform and fix it with thick wood to prevent the aluminum plate from shaking. 4.Use cutting fluid or oil to reduce the temperature during the cutting process and avoid scratches.

5.Try to use fresh blades with slips to get better cutting results and avoid scratches. 6.

Cut at a low speed to reduce heat during the cutting process and avoid scratches. 7.After the cutting is completed, fine sandpaper should be used to smooth the cutting line to eliminate cutting marks and avoid scratches.

When cutting aluminum plates, how to avoid scratches

Kiss! Hello, happy to answer your <>

When cutting the aluminum plate, how to avoid scratches is as follows; 1. After the processed aluminum parts are taken down, they should be wrapped with a cohesive film, because the envelope can be touched by the workpiece in the same way as foam. 2. During processing, the clamping should be fixed, because if the workpiece is not clamped well, the workpiece will also be scratched. 3. After taking it down, if there is a burr, do not use a file, use a professional knife, and deburr, because the file will increase the scratch area.

Expand knowledge 1. The shearing machine must have a special person responsible for management. 2. Dress code, wear tight-fitting protective clothing before operation, the cuffs are fastened, the hem of the jacket is open, and it is not allowed to wear, take off or change clothes next to the machine tool that is started, or wrap it on the body to prevent the machine from being strangled. It is necessary to wear a helmet in the cap, and no skirt or slippers should be worn.

3. The operator must be familiar with the main structure, performance and use methods of the shearing machine. It is suitable for all kinds of steel plates, copper plates, aluminum plates and non-metallic material plates with the thickness of shearing materials rated by the machine tool, and the material must be traceless, welding slag, slag inclusion and weld, and excessive thickness is not allowed. Hope mine can help you <>

Do you have any other questions?