The electricity in the home is all turned off, and I know that the refrigerator is in use for a few

There are mainly three situations, one is the trip caused by a short circuit; Second, the square number of the refrigerator socket line is wrong, and the refrigerator also needs 4 square lines; The third is that there is a problem with the empty opening, and many people often use the original empty opening for new house decoration, and the normal practice is to replace all the empty openings. Check it yourself again.

One reason is that the refrigerator is leaking, and the other is that there is a problem with the air opening. However, there is another situation I have encountered that the wires in the wall are broken.

Now there is leakage protection for the safety of electricity, and there are many tripping situations, such as overload of electricity consumption, you can rule out this possibility by only using the refrigerator, and other reasons may be that the refrigerator circuit has a mixed power place, or there is a problem with the wires in the wall.

If there is a problem with the wiring, repair it as soon as possible, or provide the refrigerator with a new switch.

It is very likely that the wires inside the wall are damaged, and the wall of the new house is moist and the air opening trips. It can be verified on a case-by-case basis.

Answer: The refrigerator leaks or short-circuits, or the socket line leaks or short-circuits.

It is estimated that there is a short circuit or empty open problem, first change an empty open to see. Depending on whether the specific line is all the way or combined with other routes, it is best to open the refrigerator socket to see if the line is virtually connected.

Find an electrician to check the wiring to see if there is a leakage or a refrigerator.

1.Prevention.

Mainly because the food or plastic bag is attached to the back wall of the refrigerator, try to avoid contact between the food and the refrigerator wall when storing things, so as to effectively avoid freezing. In addition, the stability of the refrigerator preset is also one of the reasons for the freezing phenomenon, if the refrigerator is always frozen, it is necessary to consider adjusting the temperature control number to the side with a small number.

2.Combination of prevention and control.

For the freezer that has been frozen, take the initiative to clear it, turn off the power, open the refrigerator door, if you want to melt faster, you can put a basin of hot water in the refrigerator and use a damp rag to wipe it, so that you can effectively remove the ice in the freezer compartment. In addition to using this method, you can also use defrosting water, which is also more convenient.

3.Follow-up prevention.

After each defrosting, wipe the freezer with a towel, and then apply a layer of vegetable oil to the surrounding aluminum walls, and when the next frost is formed, the suction between the frost and the refrigerator wall is greatly reduced because it adheres to the refrigerator wall containing oil, so you can easily peel off the lumps without much effort.

In daily life, many people have certain misunderstandings about the maintenance of refrigerators, thinking that refrigerators only need to maintain equipment and machines and keep the inside clean, and do not need to be strictly disinfected. This perception is very incorrect.

According to the relevant departments' testing of unsterilized refrigerators in use, a large number of bacteria are commonly present in these refrigerators, and some refrigerators have as many as 1 3 bacteria per square centimeter, and some of them even have hundreds of E. coli per square centimeter. Therefore, it is not difficult to see that regular disinfection of the refrigerator is an essential and important matter, and it must not be sloppy. Full disinfection should be insisted on at least once a month.

Next, I will introduce several disinfection methods to you.

First of all, before the refrigerator is disinfected, the power should be turned off to keep the refrigerator in a shutdown state; remove stored food; Defrost the inside of the refrigerator and wipe all parts and accessories of the refrigerator; Disinfection is then applied.

There are several disinfection methods for you to choose from:

Wipe with a soft cloth dipped in 75% alcohol or acetic acid solution or Xinjieerfen solution, and close the door for 15 to 30 minutes. Scrub the disinfected area with clean water and let it dry.

Spray with peracetic acid solution and close the door for 20 to 30 minutes. Next, scrub the disinfected area with water and ice to dry.

Spray with 2% alkaline glutaraldehyde aqueous solution and close the door for 30 minutes. Then, scrub the disinfected area with clean water and dry it on ice.

Precautions: Peracetic acid solution is corrosive, make sure that its concentration is low when using;

It is strictly forbidden to use odorous or toxic disinfectants for disinfection;

After disinfection, wash with clean water and then wipe dry to keep the refrigerator dry to prevent danger.

1. Plastic film.

Before putting in the frozen food, the wall of the freezer is covered with a layer of plastic film, which can be applied quickly with the cold air of the freezer, and then put the food frozen, when it is necessary to defrost, the frozen food is quickly moved into the refrigerator for temporary storage, as long as the plastic film of the freezer is removed, the frost will be removed quickly, and then the shaken clean film can be applied again, and the frozen food can be continued again.

2. Hair dryer or electric fan.

Use a hair dryer or electric fan to slowly blow the ice and add a towel to the refrigerator layer to absorb the water, the frost layer will melt very quickly after the wind blows, so that it is easier to remove it again.

3. Vegetable oil.

After each defrosting (de-icing) of the refrigerator, wipe the freezer with a towel, and then apply a layer of vegetable oil to the inner wall around it, and when the next frost is formed, the suction between the frost and the refrigerator wall is greatly reduced because it adheres to the refrigerator wall containing oil, so it can be easily peeled off without much effort.

Fourth, natural melting.

First of all, unplug the refrigerator, take out the drawers and things in the refrigerator, clean the drawers, let the frost inside melt naturally, dry with a rag, and then restore, although this method is good, but after all, it takes time.