Mine is vivoY69 how to set up memory card to install apps

If you're running low on storage space, you can try something else:

1.Open iButler and go to Space Management. Clear the cache.

2.Remove software that you don't use often.

3.In File Management Internal Storage, delete files that you don't use frequently or move files to an SD card.

5.Close background apps that you don't need.

6.Restart your phone once. (Cache Cleared Automatically).

7.Factory reset. (Back up important data and files before resetting your phone).

First of all, playing games on mobile phones, it has little to do with you often coming to Guangzhou, but if you go to Guangzhou from a cold place, you should pay attention to changing a coat (shell) for your mobile phone in time, and secondly, the main reason, your mobile phone memory or performance is too poor to support you** and play this game, the game has high requirements for the performance and speed of the mobile phone, just like we use the computer to play games, but also to configure a high-performance assembly machine, not to mention the mobile phone. It is recommended that you clean up the apps that are not commonly used on your phone, release the memory, make your phone run as fast as possible, and take a look at your phone's network, if it is wifi to see how the network speed is, if it is poor, it will also cause the mobile game to freeze, if it is 4G to see how the signal is, if the signal is not good, it will affect the network speed and will also cause such a situation, next time if this situation occurs again, the fast way is to kill the process, and then try to enter again.

The steps are as follows:

Steps. First, open your phone's settings. As shown in the figure below:

Steps. 3. Then click on Apps. As shown in the figure below:

Steps. 4. Click on the preferred installation location. As shown in the figure below:

Steps. 5. Finally, select SD card first. As shown in the figure below:

Method to install the app to the memory card:

1. Go to Settings.

3. Go to the app.

4. Preferred installation location - check if there is an SD card first.

Only the old version of the operating system supports installing applications to memory cards, and the later ones do not support installing applications to memory cards.

Vivo Y66 mobile phone does not support setting SD card as data storage location, you can learn about it.

Method to install the app to the memory card:

The vivo Y66 adopts a three-section metal design, which is available in gold, rose gold and other colors.

The Vivo Y66 uses a white panel on the front and a 5-inch QHD resolution screen, which is relatively small. And in terms of bezel control, the vivo Y66 performs well, without the so-called big black bars.

Vivo Y66 uses a Qualcomm Snapdragon 425 quad-core processor, with a core frequency of 2GB RAM + 16GB storage, running the latest FunTouch, and supporting 256GB of SD expansion space.

The vivo Y66 is equipped with a front 5-megapixel camera and supports beauty photography. On the rear camera, it is equipped with an 8-megapixel camera and uses a 2,500mAh battery.

Vivo Y66 does not support software installation to a memory card.

The pattern below is different from the inside of my hand.

First, turn off your phone.

2.Use the card pin to remove the SIM card slot on the left side (card 1) or the upper side (card 2) of the fuselage.

3.Hold the chip down and install it inside the card slot.

4.Then insert the SIM card slot into the SIM card slot of the mobile phone.

5.After the above operations are completed, it can be turned on, and after booting, if the vivo Y66 can identify the operator, it means that the SIM card has been installed successfully, and it can be used at this point.

For more doubts, you can enter the vivo official website vivo**app--my--**customer service or vivo official website web version--slide bottom--**customer service, enter manual customer service to enter the consultation and understanding.

vivoy71 mobile phone is equipped with a memory card, how to use it, dear, 1, vivoy71 mobile phone can not specify the use of SD card. Vivo Y71 does not have a data storage location option, and the data is saved in the phone storage by default. You can copy some files from your phone to the SD card for storage, and go to File Management - All Files - Long press the files you need to move - Cut - Enter the SD card - Paste it.

2. First of all, turn off the vivoy71, and use the built-in card needle after shutting down, and the card needle is in the vivoy85 packaging box, and you can take it out. 3. The SIM card slot of vivoy71 is located in the middle and upper part of the left side of the fuselage, use the card pin to insert it vertically into the small hole next to the card tray on the left side of the fuselage, and use a little force to top it, you can eject the card tray, and then pull it out and remove it. 4. Load the prepared memory card (SD card) into the corresponding position of the card slot, and then install the card tray with the memory card back into the mobile phone.

Summary. Dear, vivo Y79A mobile phone supports the use of SD card, but does not support moving software to SD card.

If you want to store ****** on the SD card, you can insert the SD card into the phone, you go to the phone's camera, and change the **Storage location in the settings to the SD card first.

vivoy79a how to play games in memory card.

Hello, I am the entertainment tutor Xiaobaozi, I am happy to serve you, I have received your question, please wait patiently for 2-3 minutes, I am sorting out the information for you, please later.

Dear, vivoy79a wants to play games in the memory card, you can do it by the following operations: 1, enter the phone settings 2, more settings 3, applications 4, find"Preferred installation location"(If you don't have this option, it means that the model doesn't support setting the installation location) What you need to rest about is that most large games don't support installing on the SD card.

Dear, vivo Y79A mobile phone supports the use of SD card, but does not support moving software to SD card. If you want to store ****** on the SD card, you can insert the SD card into the phone, you go to the phone's camera, and change the **Storage location in the settings to the SD card first. You can also try to enter the mobile phone file management, and cut large files, **, **, etc. into the SD card to release memory in all files.

Dear, do you have any other questions that I need to help you answer?

Dear, I hope I can help you, if you are satisfied with my service, please comment on my service, I wish you a smooth work and life! <>

1. First of all, open the settings on the phone, as shown in the figure below

2. Enter the settings page and click [Run and Storage Space], as shown in the figure below

3. Enter the page and click [Manage Installed Programs], as shown in the following figure:

5. Click [Move SD Card], it will take time to move, and "Moving" will be displayed at that time, as shown in the figure below

6. The appearance after successful movement, as shown in the following figure:

Workaround:

The first step is to go to the "Settings" app, then select the "More Settings" option, find the "Storage" page, click on the "Data Storage Location" option, and finally select "SD Card First".

The specific steps are as follows:

1. First of all, click the [Settings] icon on the desktop of the mobile phone to enter the settings interface.

4. In the storage options, click [Data Storage Location] at the bottom.

5. Select the data storage path of non-system software as [SD card preferred] (the dot at the back turns blue).

Click on the file management of the desktop;

Click "Phone Storage" on the file management page;

Then move the files you need to the SD card.

You can enter the file management - mobile phone USB flash drive, press the menu key to select - select file - copy and cut, click on the SD card - select the folder that needs to be placed - and then click all to paste.

Go to File Management - All Files - Long press the files you need to move - Cut - Enter SD card - Paste to move the files to the SD card for use.

vivoy67Installing software on a memory card is not supported, you can use it** settings captured by the camera are stored to the SD cardon your Mac, go to the camera - press the settings icon in the upper right corner of the interface - tapStorage locationto switch.

Steps:1. Tap the camera on the standby desktop.

2. Click ".. in the upper right corner".Icon.

3. Swipe from right to left to find the storage location.

4. Click on the storage location to change it.