Which one understands how to choose a good cutting machine equipment to make cabinet doors

It is best to choose an automatic tool change machining center for cabinet doors. Cabinet doors are not the same as cabinet bodies, and cabinet doors require a variety of knife combinations to carve out the desired graphics. The machining center is automatically switched between multiple knives, which is most suitable for cabinet door machining.

There are two kinds of machining centers, one is a rack machining center and a screw machining center.

Choosing a good, suitable equipment for your own CNC cutting machine is not determined by the configuration alone The high configuration is only the worst of the accessories, does not represent the accuracy of the whole machine, and a good machine is determined by the combination of three aspects This is also the reason why the market is called the cutting machine is so bad.

Machining accuracy (the bed processed by 5 million five-sided milling of imported 5 million guarantees the accuracy of the bed, and must be tempered and aged to ensure that it is not deformed).

Assembly accuracy (this depends on the strength of each factory, some factories have not done a few cutting machines, the factory is messy, what machines are also produced, this is unprofessional, so there is no experience in the production of cutting machines, the machine is low, after the assembly is completed, it must be tested by professional tools to ensure that the accuracy reaches plus or minus millimeters before leaving the factory, only in this way can we ensure that the machine will not be sold scrap iron for about 1 year, because the machine is worn out of the accuracy with the time and slowly decreases, if the accuracy before leaving the factory does not meet the requirements, After a year, it won't work).

Configuration (the quality of good accessories is definitely good, but the really good accessories are good in addition to the long time and after-sales service, and the good things are not guaranteed to be broken for a lifetime, and the broken ones can be solved in time is a good accessory), so the real machine is not determined by the configuration, I hope it can help you.

It is recommended to consider Xingtai Xingcan CNC Technology Co., Ltd. is a high-tech enterprise specializing in the research, development, production, sales and service of engraving machines and cutting machines, products are produced in strict accordance with ISO9001 and CE standardization, and are exported to Southeast Asia, the Middle East, Africa, Europe and the United States and other places, the country's large, medium and small cities and regions have our customers who cooperate very well, the company has strong economic and technical strength, we are equipped with a strong technical team to provide customers with pre-sale, sale, After-sales service and technical support to meet the needs of our customers. The company has a large amount of capital injection every year, and is committed to the research and development of new products to meet the needs of users at different levels. Professional technical team, sophisticated production equipment, excellent staff quality and advanced management level provide customers with a series of value-for-money products.

One. Function: Or the old saying, cabinets can be subdivided into cabinet doors and cabinets, and the cabinet door engraving machine is generally selected as a three-process engraving machine (a device often recommended to users), what about the cabinet door cutting machine?

In the application field, the cabinet door engraving machine can only be used for cabinet doors, such as: wooden doors, cabinet doors and wardrobe doors, but can not be used to make cabinets, and the cabinet door cutting machine can be used for both cabinet doors and cabinets, which is more functional than the cabinet door engraving machine.

Two. Appearance: Cabinet door engraving machine (three-process engraving machine) and cabinet door cutting machine (four-process cutting machine) are easy to distinguish in appearance, first of all, the former uses three heads, while the latter uses four heads, and the latter looks a little more atmospheric than the former.

Three. Configuration: First of all, the cabinet door engraving machine generally uses the spindle motor, and the cabinet door cutting machine uses the spindle motor, and secondly, the former uses a single-layer vacuum adsorption plate, while the latter uses a double-layer, and the cabinet door engraving machine uses computer control (i.e., Weihong control software), and the cabinet door cutting machine uses an industrial control panel (Shanlong system or a new generation system), in addition to the reducer and other configurations are different.

It should be noted that the configuration used by the machines produced by each manufacturer may vary, so the above information is for reference only.

Four. **: Needless to say, the cabinet door cutting machine is definitely higher than the cabinet door engraving machine, generally around 20,000. It depends on the configuration.

Generally speaking, there is no best furniture factory software, because the situation of each furniture factory is different, because it is limited by the equipment, technology, products, personnel, culture, etc. of the furniture factory, and the management mode of the enterprise is different to a certain extent. There are several aspects that should be taken into account in the good furniture factory software:

First, the size of the factory matches the software model.

The production scale and personnel of different furniture factories are different, and the furniture factory software should have a certain matching fit, which can be matched for furniture factories of different sizes, so as to maximize the advantages of furniture factories and software.

Second, the software and the product are compatible with each other.

The process technology of the products of different furniture factories is different, such as soft sofas, mahogany furniture, panel furniture, etc., the process and raw materials are different, and the software is required to match different products at this time, so as to truly solve the pain points and difficulties of the furniture factory.

Third, choose industry-relevant software as much as possible.

Software is generally divided into general software and industry software, the characteristics of general software is that multiple industries can be general, integrating the characteristics and characteristics of multiple industries, the disadvantage is that it cannot be exhaustive, after all, the management needs of each industry are different. One of the more famous furniture industries is the number of husbands. The advantage of this targeted furniture factory management software is that it can be targeted at this industry, after all, it has accumulated decades of industry experience and has distinctive industry characteristics.

Generally speaking, the industry-specific management software is preferred, which can more effectively improve the production and management efficiency of the furniture factory.

The cabinets and wardrobes of CNC cutting machine for panel furniture are usually custom furniture, so it is better to choose software based on process and actual production experience. Here's why:

1. Cutting software can be divided into two categories: modeling software and process software.

The idea of modeling software: establish a furniture model library - call the model according to the demand - the software automatically calculates and gives the production data - if there is no suitable model, a new model must be established. In order to meet the needs of individual customization, modeling will become the norm.

Aside from the timeliness and effectiveness of modeling, continuous modeling alone puts great pressure on furniture companies with relatively weak technical strength.

The idea of process software: establish a furniture manufacturing process library - do scheme design according to needs - software automatically calculates and gives production data. The manufacturing process is relatively stable, so it does not need to be modified frequently.

Of course, the process library of process software must be powerful enough to support the different manufacturing processes of each furniture company.

2. The software with actual production experience has solidified all kinds of experience into the software, so as to eliminate the errors, omissions, and procrastination of the panel custom furniture, while the software without actual production experience usually only stays at the level of graphic processing, not "smart". This is also the main reason why many furniture companies still feel that the cabinet and wardrobe are not easy to do, and even inferior to the traditional sliding table saw + row drill.

It is a little unrealistic to want to use a software to solve the needs of all factory furniture production, after all, the situation of each factory is different, that is, a factory, in the production, development of each period of the need to respond to the data is not the same, so it is not recommended to use what software can solve all the problems of the idea, but according to the needs of each period to make corresponding adjustments are more appropriate. Shunde Akun is your counselor. Thank you!

Recommend Jinan Tuoda CNC, the main cost-effective cutting machine. If you need a cutting machine, go directly to the manufacturer for inspection. Mainly look at the following aspects, you will know which one is better.

1. Assembly level:

The working mode of the cabinet cutting machine belongs to high-speed cutting, which has relatively high requirements for the accuracy and stability of the machine. And the most important step to ensure both is assembly. Imagine, when assembling, if the track is not horizontal, the rack is not straight, what is the use of being the same from the outside, such a machine cannot be used at all.

The Tuoda CNC wardrobe cutting machine, when assembling, is strictly used for table assembly, and all the machines are the same standard factory. Truly let customers buy a machine that can be assured.

2. Technical strength: check whether the manufacturer really has its own independent R&D personnel. Whether the machine was developed in-house or imitated.

There are no regular machine drawings. With the increasing popularity of machinery now, there are more and more types of people using machinery to replace labor, which requires that the technology of a factory must be excellent, constantly updated and improved. For example, some small factories claim to be able to do the customer's work, but in fact, they can't even make a sample for the customer's site, and the customer buys such a machine back like a pile of scrap iron, and there is no way to create value for the customer.

3. Successful cases: it is much better to visit the customer's factory than to be in the machine manufacturer. Because in this way, you can see the production process of the entire custom furniture CNC cutting machine, and know whether there are any problems with the machine in the actual production process.

4. Hardware strength: It is necessary to focus on whether the manufacturer has high-end production equipment and machining capabilities, and only high-end production equipment can produce high-quality products. Jinan Tuoda CNC spent 3 million ** Taiwan Xiehong Machinery's CNC gantry milling, which greatly improved the accuracy and quality of the machine.

Thanks if it helps!