Glory 30 is in the water? My Glory 30 is in the water, what should I do?

We are sorry to hear this, and in order to reduce your losses, we recommend that you deal with it as follows:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

Note: If you don't have a backup of your data, there may be a risk of data loss during repair.

The Honor 6 can't be turned on when it enters the water, and you can go to the after-sales service for repair.

1. After the mobile phone falls into the water, I believe that most users can fish out the mobile phone as soon as possible, which is also very important, reducing the time of contact between the mobile phone and water will minimize the damage to the mobile phone. The longer the phone is immersed in water, the more harmful it will be to the phone's earpiece, microphone, screen, and motherboard. What should I do if my phone gets water?

Teach you to properly handle water ingress on your phone.

Remove your phone from the water, quickly dry the water on the surface of your phone, and remember not to try to turn it on. Many users will subconsciously press the power button after taking out the mobile phone to see if the mobile phone can still be turned on, which is very wrong, even if the mobile phone itself is not damaged, once turned on, it may cause the result of burning the motherboard.

The correct way to deal with it is to quickly remove the battery after taking out the phone, regardless of whether the phone is turned on before it is dropped. Then throw a few times at the side with more openings on the phone (such as the data cable interface), or the side with a large gap, and throw out the water in the phone. Hold the phone when you throw it, otherwise if you throw it out, you can be ready to buy a new one.

There is a problem involved here,At present, a considerable number of mobile phones can't open the back shell,What to do if the battery can't be taken out,There is really no particularly good way to do this,Generally, the mobile phone will have a black screen after entering the water,For those mobile phones that can't deduct the battery,Don't try to press the boot button after the black screen,Or throw the water out first。

It is not recommended that you take out the battery by disassembling the machine, one is that the disassembly time is relatively long, and the water has already been in contact with the battery at that time, which is of little significance, and the other is that although water ingress will lead to warranty invalidation as private disassembly, but private disassembly may cause more serious damage to the mobile phone than water ingress, so if you are not a master or professional, don't consider the problem of disassembly.

2. If you feel that the water in your phone is almost gone, don't try to turn it on. As long as the phone is flooded, you should wait at least 24 hours if you want to turn it on. Here what we have to do is to deal with the water stains that remain in the phone.

These water stains are usually left inside the phone, and if you try to turn it on, there is still a risk of burning the motherboard.

Many people think that after the mobile phone enters the water, use a hair dryer to dry the inside, this method is not impossible, but pay attention to the way of operation, the temperature of the wind blown by the hair dryer is still relatively high, which is basically equivalent to the temperature when the mobile phone is most seriously heated, the closer to the tuyere, the higher the temperature, it is not impossible to be scalded by the hair dryer, so when blowing the mobile phone, you must pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature. Remember not to blow the air vent of the hair dryer directly on the phone, too high a temperature is absolutely not good for the phone.

Don't be afraid of water in your phone, teach you to solve it in four steps.

The first step: power off the mobile phone, many mobile phones will turn on automatic protection after detecting that the mobile phone is water, directly shut down and then prevent the mobile phone from short circuiting, at this time if you find that the mobile phone has been turned off, don't panic to test whether the mobile phone can be used, don't turn on the next step directly, if you find that the mobile phone can still be used normally, that is, there is no power outage, then don't be happy, you still need to power off the mobile phone, because if you don't power off in time, it may form a short circuit on the motherboard, As long as the motherboard is short-circuited, then your mobile phone really has to go to the repair shop.

Step 2: Remove all external devices, including SIM card slots, data cables, headphones, phone cases, etc., this is to prevent the current at the interface from causing secondary damage, and also to prevent things like the phone case from making the evaporation area of the mobile phone larger, because if the evaporated area becomes larger, this water ingress is particularly difficult to handle.

Step 3: Deal with the problem of water ingress into the mobile phone, find a direction that can drain the water out, and shake the mobile phone hard, this step needs to control the strength, the water in the small mobile phone can not be thrown out, if the strength is too large, the mobile phone may be thrown out, and then you will not only have to repair the mobile phone into the water, but also may repair the mobile phone screen, the back of the mobile phone and so on. The most important thing to pay attention to is to clean the water in the screen, if the screen leaves water droplets, it will also leave traces after drying, affecting our visual experience, for some corners of the water, we can use cotton swabs or paper towels and the like, do not use a hot hair dryer, many users may feel that the speed of using a hair dryer to dry is faster, but the hot hair dryer may bring the risk of glue melting, but the cold hair dryer can try it.

Step 4: Stand the phone to let the water evaporate, if the previous step has not seen obvious water droplets, the phone will be left to stand for more than 24 hours, do not be anxious to test whether the phone can be used, otherwise the above steps are completely in vain, if you can still see a significant small amount of water vapor, we can use rice or desiccant and so on to assist in the operation of water. Wait until 24 hours later, we can try to turn on the phone, under normal circumstances, the phone can still be turned on normally, if it can't be turned on, congratulations you may have a chance to change the phone, of course, you can still go to repair.

The Honor 30 mobile phone is flooded, and you must remember not to operate the control buttons and do not turn it on, so as not to damage the hardware twice when the hardware is powered on and short-circuited in water. In this case, it is recommended to wipe the surface dry and go to the mobile phone store for maintenance.

If it is still in normal working condition, try to wipe off the water on the surface in a static state at this time, and leave it for a period of time to let the machine heat up and evaporate the water, and then try to operate normally according to the situation.

If your water is ingressive, it is recommended that you go to the after-sales service center of this brand and find a maintenance person to help you repair it.

1. Shut down in time.

When the mobile phone gets into the water, first turn it off immediately to avoid the result of burning the motherboard.

2. Remove moisture.

First of all, you can quickly wipe it with a clean towel, and then use a hair dryer to dry the inside, pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature, and the time for the hair dryer to blow the mobile phone should not be too long, 20 minutes is basically fine.

3. Drying treatment.

1. Wrap the mobile phone in a paper towel and throw it into the rice, which helps to absorb all the remaining water droplets and water vapor inside the mobile phone, but after all, rice is only an emergency measure, and you can usually prepare some desiccant or drying box in case of emergency.

2. At this time, you can try to turn on the mobile phone, if the water into the mobile phone is not serious, it should be able to turn on normally. If you still can't turn it on, you can only send your phone to a professional repair shop.

Hello, the water ingress of the mobile phone depends on the state of the water ingress, it is recommended to send it directly to the maintenance point for testing, whether the water is ingress or not, and then according to the detailed situation to remove the water, because after all, if the water is in the mobile phone, the impact is the state of damage to the hardware.

Don't turn it on, hurry up and go to Huawei for after-sales maintenance.

Don't turn on the machine and put it directly into the rice cylinder, or go directly to the after-sales service to let the professionals repair it for you.

1. Shut down immediately.

The reason for shutting down is that when your phone gets water, if the phone is turned on, water will seep into the circuit, which will cause a short circuit in the phone and cause damage to the motherboard. Therefore, when the control key is not out of order, it should be shut down directly.

2. Don't shake your phone.

After the phone is scooped out of the water, most people may shake the phone vigorously to shake the water inside the phone. However, this approach is actually wrong, we throw it like this, it is easy for water to spread inside the phone, and the water will enter the inside of the phone. The correct way to do this is to dry the water with a dry paper towel or absorbent dry cloth and use a cotton swab or tampon.

Wipe the charging port with water at the earphone jack.

3. Don't blow with a fan.

Because the hair dryer blows water from the headphone jack, charging port, and outside the body into the phone! In fact, we can use a hair dryer after our mobile phone gets into the water.

Blow dry. However, this method only works on non-smartphones. And the hot air that blows out of this hair dryer.

It is possible to damage some parts inside the phone. Therefore, you need to use it with caution!

4. Dehumidify with rice.

The best desiccant around us.

Actually, it's the rice we usually eat. When your phone gets in the water, quickly remove it and dry it, then put the rice in a sealed bag with the phone for two days. The amount of this rice is best more than two catties.

Of course, if the water ingress is really serious. It is still recommended to take it to a repair center and let a professional fix it.

Don't be in a hurry to turn on the phone when it gets into the water, and the treatment method is as follows: 1. Take out the mobile phone immediately. When you find that your phone is in water or touches water, your first reaction is not just to scream, but to take out your phone as quickly as possible, reduce the time of contact with water, and minimize the damage to your phone.

2. Shut down. Turn off the phone as soon as you get it, or maybe the phone has turned off automatically, take out the SIM card of the phone. At this time, don't be in a hurry to turn on the phone, because after the water enters the phone, if the power is turned on immediately, it may cause a short circuit inside the phone, and it may even burn the phone.

3. Dry the water in time. At the same time, you can use dry cloths, paper towels, cotton swabs, etc. to properly dry the water, pay special attention to the earphone hole, charging hole, these places, it is not recommended to use a hair dryer to blow, it may damage the parts of the mobile phone. Then place in a dry and ventilated place to avoid getting moisture again.

Fourth, check the situation of parts. After the water machine is flooded, it is not recommended to disassemble the mobile phone to check the parts, you can take it to a professional repair shop to check, let the maintenance personnel help us see, and use professional tools to absorb the water.

Dry and turn off quickly, don't turn on the machine, wrap a few more layers of toilet paper, and bake it at 20 cm according to the fluorescent lamp for about 24 hours, and turn it on!

Put it in a dry environment for two days.

After that, let's see if it can be turned on.。。

If you turn it on, it can be used normally for a week.。。

There is no need for maintenance.

Immediately air dry naturally, with a hair dryer, do not disassemble the inside. Don't worry!

Shut down the phone immediately after water ingress, remember not to turn it on, if you turn it on again, it may damage the internal parts of the phone, and if it is serious, it may cause damage to the motherboard, remember! If the mobile phone enters the water, you should immediately wipe all the water on the surface with an absorbent paper towel, then disassemble the mobile phone, continue to dry the water on the internal surface of the mobile phone with a paper towel, and then use a hair dryer to dry all the parts inside.