What should I do if my phone enters the water on the phone, and what should I do if the water enters

If the phone accidentally gets into water, you can try the following ways to deal with the phone urgently to avoid secondary injury: Take the phone to a dry and ventilated place, and use a dry paper towel or towel to blot the water stains on the surface of the phone. If the phone is turned on, press the power button to power off; If the phone is turned off, please do not try to turn it on, and do not shake or shake the phone frequently after the phone gets into the water to avoid moisture in the phone.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

What should I do if my phone gets water? You must know this first aid method!

If your phone gets into the water, don't you use paper? Well, it's generally the kind that prepares a pot of rice to dry, single rice, and then get the phone down Well, give him um, face clothes, don't let the design be exposed, put it in it, put it in the middle of the rice, let him put it for a minute or two, or 30 minutes to take it out, and then wipe it with a dry towel or paper, and then it's OK, which is very correct.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Mobile phone water treatment method:

1. Shut down immediately.

If the phone falls into the water, you need to salvage the phone immediately, and quickly press the power off button to turn it off, if it is a detachable phone, then we can take out the battery, memory card, etc. first. Powering off your phone first will prevent your phone's battery from being short-circuited**. If the phone is dropped vertically, it is best to pick it up vertically.

2. Remove moisture.

After scooping up the phone, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake your phone dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3. Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air in the process of using the hair dryer, keep a certain distance between the hair dryer and the mobile phone, it is best to let the wind blown out of it close to room temperature, do not direct the air outlet of the hair dryer to the mobile phone, usually the hair dryer blows the mobile phone for about 20 minutes.

4. Drying treatment.

Next, the phone is dried. Rice has good water absorption, we can wrap the phone in a paper towel and put it in the rice. Usually sealed and stored for 12 hours is fine.

Generally, if the mobile phone is not flooded for a long time, it can be turned on normally. We can also put the mobile phone together with desiccant, drying box.

5. Check your phone.

If the mobile phone can be turned on normally, then we need to check whether the parts of the mobile phone can be used normally, for example, whether there are traces of the screen of the mobile phone, whether its earpiece, microphone, and speaker can be used normally, whether the camera of the mobile phone can take pictures, etc.

6. After-sales maintenance.

If the phone has been soaked for a long time, or the phone cannot be turned on after treatment, we had better send it to a professional for repair.

Summary: It is best not to press any button on the mobile phone before it is thoroughly dried, and do not frequently switch on and off the test to prevent damage to the mobile phone due to short circuits and other reasons.

Mobile phone is a tool that everyone often uses, in daily use, the mobile phone will inevitably bump and bump, this is a very normal thing, generally will not cause damage to the mobile phone, but after all, the mobile phone is an electronic product, very afraid of water, there are many friends after the mobile phone fell into the water, because of improper handling, and finally led to the scrapping of the mobile phone. In fact, the waterproof performance of today's mobile phones is relatively good, as long as it is handled properly, the mobile phone will generally not have much damage. So what to do if you drop your phone in water?

Let's find out together.

Let's take a look at the methods that we usually use, after many people's mobile phones fall into the water, the first time is to take out the mobile phone and blow it with a hair dryer, and it is blowing on the opening of the mobile phone, thinking that it can be dry by blowing, in fact, the mobile phone itself is waterproof, under normal circumstances, a short period of soaking in water, it will not penetrate into the motherboard, since it will not go to the motherboard, there is no big problem.

However, if you use a hair dryer to blow it, it will cause water droplets to be forced to the motherboard, which is full of hardware and various wiring, and once it encounters water, it will definitely cause a series of problems such as short circuits. But it's not that you can't use a hair dryer, it's that you haven't mastered the method.

The correct way is to first place the hole of the mobile phone, that is, the place where the mobile phone enters the water, vertically downward, so that the water comes in from the **, after fixing the mobile phone, use a hair dryer to blow from the non-porous place to the place with the hole, so as to avoid bringing water droplets to the motherboard, and you can also heat the mobile phone to a certain extent to accelerate the evaporation of the water inside, but the temperature should be controlled well, and the mobile phone should not be excessively high. In addition, the phone is turned off during the whole process.

This is just an indoor practice, if the outdoor sun is very good, it is easier to do, wipe it with paper, and then fix the phone vertically according to the above method, and put it in the sun to expose it, but this process does not need to be turned off, but the whole process is turned on, and the speaker is turned on to the maximum. Wait 15 minutes to 30 minutes.

The principle of this is very simple,Vertical placement of the mobile phone will not let the water droplets flow to the inside of the mobile phone,Exposure to the sun is to accelerate the evaporation of internal moisture,The last speaker is more important,Although the sound of the speaker is not as good as the sound,But we are not for listening**,But in order to bounce the moisture away from the speaker through the speaker vibration,You can also accelerate the flow of air through sound waves,So as to take away the moisture。

However, the waterproof level of mobile phones is very high, under normal circumstances, if the mobile phone falls into the water and picks it up immediately, shake it a few times and then wipe it dry, there will be no problem, even if it enters the water, it is only one drop or two drops, and it has to reach the motherboard through layers of obstacles, even if it reaches the motherboard, it has to pass a distance to various lines, and the water may have evaporated at this time. Friends, have you ever encountered a situation where your mobile phone fell into the water? If so, how do you deal with it?

If you have a better opinion, remember to share it with your friends.

If you use a vivo mobile phone, the liquid inlet treatment method of the mobile phone is as follows:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and come in to suck out the water in the gap; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera facing upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. Customer service center address: Enter the vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the bottom--service support--service network inquiry--select the province and city to query the customer service center address.

It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

After entering the water, we must have scooped it up as soon as possible, and if we fished it up, we would definitely not have to think about it for the first time, and wipe the moisture on the surface of the mobile phone with a paper towel. After wiping the water on the surface, some people say that they use a hair dryer to blow on the crevices, but in fact, there is still a lot of water in the mobile phone. It can't solve the problem of moisture residue inside the phone.

Because there is a battery in your mobile phone, when the mobile phone is still powered on, use a hair dryer to blow it, or put it in a rice cylinder for a few days, which may break your mobile phone in the process. There are short circuits and corrosion, so these two methods are definitely not working. Then let's wipe the water here first, which is also the most direct method and the most effective.

Next, if we lose power, as long as you turn off the battery, your phone will not be harmed. Fault short circuit. If you don't know how to disassemble and repair the phone, it is recommended that you turn off the phone as soon as it gets into the water and send it to the place where the phone is repaired, disassemble the phone, remove the battery, and then use a blow dryer to dry the residual moisture on the motherboard and other parts of the phone.

That's the right way to do it.

Although it is said that mobile phones now have waterproof measures, as long as it is a mobile phone, there must be a certain gap, and more or less water will enter between the gaps, so you must not absolutely believe in the waterproof function of the mobile phone, after all, a mobile phone is still thousands. To summarize what was said above, for people who don't know how to disassemble and repair, the first time is to keep the mobile phone away from the water source, wipe off the visible water, and wipe the moisture on the surface of the mobile phone first. Then go to a repair shop or disassemble the phone to repair it yourself and dry the moisture inside the phone.

First, quickly take the mobile phone out of the water and pull out the battery to take out the mobile phone card and memory card, the reason, once the mobile phone enters the water, the first time it must be the battery, the connection is in contact with water, resulting in power failure or short circuit, so that the mobile phone is directly shut down, so the mobile phone must be pulled out immediately after the battery is taken out, if it causes a long-term short circuit and burns out the motherboard, it will be troublesome, of course, the mobile phone card and memory card should also be taken out, second, if it is a corrosive liquid, it is recommended to immediately flush the reason, corrosive liquid, will definitely corrode the mobile phoneAnd that's of course, especially like, there are too many small parts inside the phone as well as circuit board chips that are extremely susceptible to corrosion, and a clear part like this, even in a very small place, is corroded. It was also difficult for me to carry out the whole machine, so I had to quickly rinse the Western-style corrosive liquid with clean water to ensure that these liquids could not corrode the phone, and try to throw the water out.

The mobile phone enters the water, turn it off immediately, first blow the mobile phone with the blowing plane for a while, and then put the mobile phone in the rice and place it overnight, the rice has a strong ability to absorb water, and then turn it on the next day to try, if the function is normal, congratulations, good luck, the mobile phone can continue to be used, if it can't be turned on, or there is a problem with the function, it needs to be repaired.

Don't turn on the mobile phone when it gets water, turn it on and wipe the water, blow it with a hair dryer where it can't be wiped, don't open the low gear too hot, and slowly absorb the moisture in the rice generation.

It can only be placed in a ventilated place to dry and dry naturally for more than 24 hours.

What should I do if my phone gets water? Do not turn on and turn off the mobile phone when water enters. Wait until. Dry it yourself and then turn it on.

After the phone is flooded with water or liquid, it is recommended to deal with it according to the following methods in order to avoid further damage:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:

1.Please do not turn on or charge the phone after entering the water, as powering on may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by the hair dryer, etc., it may penetrate into other components of the screen, which will make the mobile phone damp and damage the electronic components).