What should I do if the entire microwave oven gets water, and what should I do if the microwave oven

Microwave water or other liquids that have flowed into the oven need to be disposed of immediately, do not wait for it to dry naturally. Because the water wets the internal circuits or components, the interior is closed and not ventilated, and the water is difficult to evaporate, and the circuit parts will be corroded after a long time, and it is difficult to repair the components after they are damaged. In particular, leakage of soy sauce, soup and other salt-containing and electrolyte-containing liquids is more likely to cause corrosion and damage to electronic circuit components.

Don't wait for the repair department to be repaired, as the liquid that enters the interior may flow further during the handling and repair process, contaminating the wiring or other components.

Solution: 1: Cut off the power supply, pull out the power plug, take out the glass turntable, and tilt the microwave oven to the left rear (because there are no important wiring parts in the left rear), so that the incoming liquid flows out from the lower left rear corner;

2: Remove the screws of the iron shell, uncover the cover, if it is water, you can use a semi-wet cotton cloth or gauze to absorb the water, and then dry it with a dry cotton cloth or gauze;

3: If it is a liquid containing electrolytes, after cleaning it with semi-wet cotton yarn, you can drop a small amount of water (preferably anhydrous alcohol) and then wipe it with gauze;

4: Let the machine open in a ventilated and dry place, wait for it to be completely dry, check that there is no problem and then install the cover, put on the screws, and then connect the power supply to test the machine. There is no problem with the test machine and it can be used normally.

If there is no electricity when soaking in water, and there is no power after soaking, there should be no problem. But wait for the water to dry You can remove the back cover and dry it with a hair dryer that blows your hair, and if you don't take it apart, you can put it in a sunny place to dry it for a few days! If you're looking for a repair, he'll dry it for you and say this and that.

At least 50 yuan.

Oh new machine, although there is a free warranty, but you are artificially ingress water, he will not be free. ]

If water enters the microwave, the following steps need to be taken to deal with it:

1.Dispose of the microwave inlet water immediately and do not wait for it to dry naturally.

2.Cut off the power supply, pull out the power plug, take out the glass turntable, and tilt the microwave oven to the rear left so that the incoming liquid flows out of the lower left rear corner.

3.Remove the screws of the iron cover, remove the cover, absorb the moisture of the shed with a semi-damp cotton cloth or gauze, and then dry it with a dry cotton cloth or gauze.

4.Let the machine open in a ventilated and dry place, wait for it to be completely dry, check that there is no problem, then install the cover, put on the screws, and then connect the power supply to test the machine.

Please note that you should disconnect the power supply and make sure the microwave is completely dry before performing any repairs.

Water entering the microwave oven is a very bad thing, because if the water is not cleaned in time, it may cause serious damage to the microwave oven, and it will also bring great trouble to our use. If you encounter such a problem, you can follow the following methods to deal with it:

1. Power-off treatment. First of all, you should immediately turn off the power of the microwave oven, loosen the plug, and open the microwave door to let some of the water inside evaporate.

2. Cleaning and processing. Drain the water, remove the turntable and other removable parts, and carefully wipe with a clean cloth or paper towel while cleaning the inside and outside surfaces of the microwave. If necessary, you can clean it with some soapy water or detergent.

3. Oven treatment. Turn the microwave to oven mode, then leave the microwave door open and wait 10 to 15 minutes for the moisture inside the microwave to evaporate.

4. Restart processing. Plug the microwave oven back in, try to start the microwave oven to see if it is normal, you can test it with some simple food, such as bread, cakes, etc.

In short, if water enters the microwave oven, it should be immediately disposed of, then cleaned up, and the water inside it should be evaporated, and finally restarted for testing to ensure safe use. If you are unsure of how to do this or if you have not handled it properly, you should seek professional help.

If water enters the microwave oven, make sure it is safe and do not use or turn on the microwave oven. Here are some ways to solve the problem of water ingress into the microwave:

1.Stop using the micro-choke oven and unplug it, making sure to disconnect the power supply to prevent electric shock.

2.If the microwave oven is still under warranty, you can contact the after-sales service center or the manufacturer for professional help.

3.Turn the microwave on and see where the water is entering. If only the microwave shell gets water, you can wipe the water dry with a dry towel or paper towel.

4.If water gets inside the microwave oven, it is recommended not to repair it yourself, as operations involving the inside of the appliance may be dangerous. Seek the help of a professional repairman who can handle the problem more safely.

5.Try to keep the microwave dry until you wait for the repairman to arrive, you can use a hair dryer to evaporate the water or use a water suction device to absorb the water.

In conclusion, microwave ovens with water ingress need to be professionally repaired to ensure safe and normal use. Avoid self-repairs to avoid greater danger or damage.

In order to ensure that the residual moisture in the microwave oven can reach the dry standard as soon as possible, it is best to use a heater to transmit hot air to the microwave oven to promote the volatilization of the water in the microwave oven as soon as possible. If you are lucky, you need to send it to the maintenance department for repair, and then use it after making sure that it is repaired to ensure safety.

If water gets into the microwave, you need to take the following steps to deal with the problem:

Power off and disconnect the plug: First, immediately disconnect the power to the microwave oven, unplug it or turn off the power switch to ensure safety.

Power off and plug: First, immediately disconnect the microwave oven from power, unplug the cooker, or turn off the power switch to ensure safety.

Remove water: Carefully use tools such as a water absorber, paper towel, clean towel, or sponge to blot or wipe the inside of the microwave dry. Always be careful not to touch the contents of the microwave oven or electrical parts to avoid the risk of electric shock.

After the microwave oven is flooded, it will lead to a short circuit, which is mainly because the circuit boards and components inside the microwave oven are electronic components, and moisture will cause a short circuit in the circuit lifter, which will affect the normal use of the microwave oven and even cause potential safety hazards.

If the microwave oven gets into the water and is short-circuited, it is recommended not to repair it by yourself, as this requires professional technology and equipment to handle, and improper operation may lead to safety hazards. It is recommended to unplug the microwave oven immediately, stop using it, and choose a professional repair service for repair.

If you encounter falling into the water or getting wet when using the microwave oven, you should immediately interrupt the heating, and blot the inside of the microwave oven with paper towels, cloths, etc., and place it in a ventilated and dry place to dry.

Microwave oven leakage refers to the phenomenon that water flows out or leaks out of the microwave oven during the use of the microwave oven. This is usually caused by a poor seal on the inside of the microwave oven or improper use.

First of all, it may be that the inside of the microwave oven is not tightly sealed. When the inside of a microwave oven is not tightly sealed, moisture can escape through holes or cracks. Therefore, we need to check whether the seal of the microwave oven is intact, and if there is a leak or damage, it needs to be repaired or replaced in time.

When using the microwave oven, we also need to be careful to cover the container when heating food or liquids to avoid spilling the food or liquids.

Secondly, improper use can also be one of the causes of microwave leakage. For example, when microwave steam is used, water can easily spill if the lid is not used to cover the container. In addition, in cleaning the microwave oven, it is necessary to unplug the power supply and wait until the microwave oven has completely cooled before cleaning.

If you are washing the inside of the microwave oven with water, it is fine to dry it with a handkerchief or towel. If necessary, you can put a few paper towels or towels in the microwave to absorb the water, and also check whether the filter layer of the microwave oven is effective, if it has expired, it needs to be replaced in time to ensure the use of the effect of the hood.

In short, microwave oven leakage is a common problem, we need to carefully check the sealing of the microwave oven, pay attention to the coverage and operation method when heating food or liquids, clean the microwave oven in time and ensure the effectiveness of the filter layer to avoid unnecessary use problems.