How to paste pebbles looks good, how to pave pebbles simple and good looking

If you follow my method, the pebbles will look good and durable.

1.Clean up the base layer. Pebbles are generally laid outdoors, and in order to ensure that the pebbles are paved firmly, it is best to lay them on natural soil.

First, the height of the floating soil on the surface of the land is excavated, and then the base layer is compacted. But if the time is to make pebbles on the surface of concrete, be sure to shovel off the original concrete, and then pave the paving fine stone concrete to smooth the road surface, the thickness of the fine stone concrete is about 8 10cm, and the laying area can be directly sold with 1:3 mortar.

2.Mortar smoothing. The surface of the base layer can be smeared with a plain cement slurry first, in order to ensure the viscosity of the pebbles, 107 glue can be mixed with 10% of the water volume, and then the viscous glue can be smeared into the bottom layer of the mortar respectively.

The mortar at the bottom layer should also be treated flat, which can be scraped flat with a ruler, and then rubbed with wooden crabs, and sprinkled with water to maintain after the mortar finally sets. When wiping the surface layer of stone slurry, first scrape a plain cement slurry, from bottom to top twice to wipe the stone slurry, the surface should be slightly higher than the ground completed on both sides 1mm, and finally the stone slurry layer is flattened and compacted.

3.Install pebbles. The method of installing pebbles is more critical, first of all, it is best to choose pebbles of different colors and different sizes, and then you can install pebbles according to your favorite patterns and textures.

It should be noted that the thickness of the pebbles must be completely inserted into the cement about two-thirds of the thickness of the pebbles, and the distance between the pebbles must be sufficiently concealed, and the surface of the pebbles should also be controlled on the same horizontal plane, so as not to fall down when it is uneven in the future, and it is not comfortable enough to step on.

4.Clean the surface. After the pebble is installed, you can use a soft broom to gently clean the cement ash on the surface of the pebble, at the initial time, you must pay attention to sprinkling water on the cobblestone pavement evenly on time, but the amount of sprinkling is not too large, as long as the sprinkling amount can meet the pebble solidification on the surface of the cement and provide sufficient water source, until the sprinkled water is about to start overflowing, stop sprinkling, and wait until the pebble is completely solidified on the road surface to stop sprinkling.

Good-looking pebbles can be pasted with a lot of good-looking and beautiful jewelry. You can choose the shape according to the shape of the pebbles, such as sticking an animal or something you like, and then nitrate to modify it is better and more like what you want to paste, really beautiful. There are also shells.

How to lay the cobblestones:

1. Dry paving method (1) clean up the base layer of the balcony ground and shovel off some of the original concrete. (2) Then pave fine stone concrete and smooth it with a thickness of 8-10cm. (3) Lay cement dry ash (cement plus sand without water), according to the thickness of the pebbles about three-quarters, and then smooth.

4) Place the pebbles according to the desired texture, insert about two-thirds of the thickness of the pebbles into the cement dry ash, control each stone to be on the same horizontal plane, and the spacing of each stone should be a little tighter. (5) After the pebbles are placed, first use a soft broom to sweep off the cement ash on the surface, and finally the sprinkler stool is not, the sprinkling water should be even, the amount of water should not be too large, and the sprinkling until there is already water and start to overflow. Wait for two or three days, and the beautiful cobblestone floor will be paved.

2. Wet paving method (1) lay a layer of cement mortar on the pre-paved ground, and the thickness of the mortar depends on the thickness of the pebbles, generally 3-10cm. (2) Smooth the cement mortar, and then insert the pebbles into the cement mortar. When paving, pay attention to placing the side of the pebble with a longer radial direction in the vertical direction.

Pebbles are a by-product of mining yellow sand, and are named because they resemble goose eggs. As a pure natural stone, pebbles are taken from the sandstone mountains produced by the uplift of the ancient riverbed after the earth's crustal movement tens of millions of years ago, and experience the continuous squeezing and friction in the process of mountain floods and flowing water transportation. In the process of tens of thousands of years of vicissitudes of life, the pebbles have been subjected to the movement of waves and waters, and have lost their irregular edges and corners by the collision and friction of gravel, and have been buried deep in the ground and silent for millions of years together with the sediment.

Summary. Hello, 1, first spread the mixed concrete on the ground, and then spread the pebbles evenly on the concrete. 2. Use a template or roller plate to squeeze the pebbles to keep the pebbles at a basic level.

3. However, it should be noted that in the process of squeezing the pebbles, the pebbles cannot be pressed too flat.

Hello, 1. First spread the mixed concrete on the ground, and then spread the pebbles evenly on the concrete. 2. Use a template or roller plate to squeeze the first width of the pebbles to keep the pebbles at a basic level. 3. However, it should be noted that in the process of squeezing the pebbles, the celery chain cannot press the pebbles too flat.

Hello, to make the pebble paving firm before the construction of the ground dust and debris to thoroughly clean up, check whether the ground has hollowing and cracking and sanding, and spine sensitive and before the formal construction to moisten the ground cherry silver branches.

Pebble pavement steps and methods: (1) Clean up the base layer: If you are laying natural soil in the yard, first dig out the floating soil on the ground according to the design height, and then compact.

If you do it indoors, shovel out some of the original coagulant soil. Then, pave fine stone concrete to smooth the road surface, generally 8 to 10 cm thick, and the small area can also be directly used with 1:3 mortar.

2) Wipe the bottom layer mortar: first wipe a plain cement slurry (107 glue mixed with 10% of the water consumption) on the base layer, and then wipe the bottom layer mortar in layers; The bottom mortar should be scraped flat with a ruler, and the hair of the wooden crab should be rubbed, and the mortar should be sprinkled with water for maintenance after the final setting. When plastering the surface layer of stone slurry, first scrape a plain cement slurry, from bottom to top twice to wipe the stone slurry, the surface should be slightly higher than the ground completed on both sides 1mm, and then the stone slurry layer is flattened and compacted.

3) Lay cement dry ash (cement plus sand without water), the height is about three-quarters of the thickness of the pebble, and then smoothed. (4) Installation of pebbles: This process is more critical, you can install pebbles according to your favorite graphic texture, pay attention to the installation must be about 2/3 of the thickness of the pebbles into the cement dry ash, the distance between the pebbles and the pebbles is dense, but also pay attention to the control of the stone surface to keep on a brother amuse a horizontal surface.

5) Finishing: After the pebbles are paved, gently sweep off the cement ash on the surface of the pebbles with a soft broom. Then Yanwei Mountain is the most critical step to sprinkle water, when sprinkling, pay attention to the road surface to connect the mountain to receive even water, and the amount of water should not be too large when sprinkling.

In this way, the cement ash on the pebbles is washed away, and the cement solidification provides sufficient water source, and it is enough to bring the water to start coarse overflow.

How to paste the pebbles in the pool to mix the cement and pebbles together, then add water and stir evenly, and then pile up, and after half drying, the cement on the surface of the pebbles is cleaned and completed; First, mix the cement with water and then pile it up, then lay pebbles, and clean it up after it is half dry. Macros and you can choose according to your own needs, but one thing is the most important, that is, waterproof! Before building the pool with pebbles, you must do a good job of waterproofing the ground, otherwise you will save trouble, and the owner of the balcony leaking downstairs will come to the door, then it will be a big trouble.

Pebbles are generally suitable for one of the decoration materials in the courtyard or off-site, help, so how to pave the pebbles, and what is the specific laying method. What is the method of paving pebbles, these contents are very good for everyone to understand the problem of pebbles, to introduce the relevant content in detail. I don't know if you have any understanding of decoration materials, when choosing decoration materials, you need to depend on the specific situation, for example, pebbles are generally suitable for the courtyard or one of the off-site decoration materials, help, so how to pave the pebbles, what is the specific laying method.

How to lay pebbles

Pebbles are flat, if the pebbles are laid flat, only the bottom is in contact with the cement, and it is easy to fall off after a short time, which is very common. Therefore, it is recommended to stand up, of course, so that more pebbles are used. You can consult:

Shandong Yihe cobblestone plant; Shandong Yihe Cobblestone Factory is a production unit that produces and sells natural pebbles, and is a relatively large pebble production unit in Shandong Province, with a lot of experience in cobblestone garden pavement construction.

How to pave pebbles

Before the construction of the pebbles, the dust and debris on the ground should be thoroughly cleaned, and the ground should not be hollowed out, cracked and sanded, so as to keep the ground clean and have the strength required by the specification and meet the requirements of the thickness of the construction bond. In addition, the pebbles should be moistened with a little water before the formal construction.

Paving should be made of 1:3 dry hard mortar, which is fully stirred and evenly mixed. First brush a plain cement slurry on the cleaned ground, spread the dry hard mortar that has been stirred to the ground and shoot it with a gray board, pay attention to the thickness of the mortar should exceed the height of the pebbles and washing rice stone more than 2 3, and the thickness of the mortar is controlled at 30 mm.

Put the pebbles and washed rice stones on the dry hard mortar according to the requirements, smash them with a rubber hammer, adjust the thickness of the dry hard mortar according to the decorative elevation, and pave them from the middle to the periphery.

How to pave the pebbles, first of all, the pebbles need to be flat, and then the construction is carried out according to the specific requirements and laying methods, so as to reduce many construction problems. So I'm still very important. Everyone knows the method of paving pebbles, according to the content I introduced, there will be no problems, and it is also very important to find a suitable decoration company and decoration team, which can not be ignored.