Why does it keep showing like this? I ve installed it a few times

It means that the version you installed is faulty, and it is recommended that you uninstall and reinstall the new version, and try again, which may be better.

If you have been installing it like this several times and it is still unsuccessful, then it should be not supported by the system, so there is no way to use it.

If this is always the case, it means that you must be installing it in the wrong way, so it will show up like this, and then you can continue to install a few more pieces, and then you can reinstall it.

Hello landlord: It is recommended that you uninstall QQ** first, and then upgrade QQ to the latest version, then run QQ, and click the QQ** icon on the QQ panel to install.

Tonight you change your browser and you have a problem with your browser, so for example, the browser is still better.

The old display shows that you have installed it several times.,Some words are to be ordinary**,Some words are rapid**,Generally, we are ordinary**is the best.,If you try ordinary**, it should be possible to install it.。

That's not the problem of your installation, it's the problem of your roommate's stuff that you haven't cleaned out, it's like a system that he always installs when something goes wrong.

If you always dislike it, you have to install it several times, all quickly. Then it means that his program does not support the cut installation of his software.

After it comes out, it must be that you installed it wrong.,So you must reinstall it again.,In general, re-installation can be solved.。

Now it always shows that it has been installed a few times like this, I think it must be because of the setting problem, I think you can still find a professional to let you. Help him, let him help you figure it out.

Hello, you belong to the system and software incompatibility in this situation.

Every time it is displayed like that, it may be that there is an unsupported part of the process when you install it.

Teacher,Now like this,I think this may be because your system is a three-point land.,So this system has to be updated out of school.,Otherwise, play one without sending it.,So this should be a must.。

Open the control panel and see if the programs and features there are any of them.

Why do you keep thinking about this, I have installed it several times, you should go to a professional store to check it, and find a professional to install it for you.

If you're experiencing a "fake update prompt" on your device, it may be because the software update failed or there was a problem with the program after the update. Here are some possible workarounds:

1.Restart your device. Sometimes the easiest way to fix the problem is to restart your device. After a restart, the update prompt may disappear. Hand of the hand.

2.Clear the application cache. Go to your device's app settings menu, find the app you're having trouble with, and then select Clear cache. This clears the app's cache and sometimes solves the problem.

3.Uninstall and reinstall the app. If emptying the cache doesn't fix the problem, try uninstalling the app and reinstalling it, which can be corrected to clean the app thoroughly and reactivate it by reinstalling it.

4.Check your network connection. Sometimes the update will fail due to network connection problems in the middle of the update, so you need to check whether the network is connected normally.

If none of the above methods work, it is recommended to contact the developer of the app or the relevant technical support department to resolve the issue.

If you have "Updated, Installed" on your phone but it doesn't work properly, you can try the following methods to solve the problem:

1.Clear Cache: Find App Management in your phone's settings - > all code-picking apps, select the malfunctioning program, and clean up data and cache.

2.Grip on the phone: Sometimes the phone cache will leave some problems, and restarting the phone can remove these problems.

4.Check for system updates: Look for the latest system updates, maybe the latest system can fix the issue.

If the above methods still do not solve the problem, you can contact the software developer or customer service. In addition, updating your phone's operating system in a timely manner can also help solve some abnormal problems once and for all.

If your device says that it has been updated and the latest version is installed, but the update prompt appears in the last few days, here are a few things you can try:

1.Force Blind Restart: Press and hold the power button and volume down key to force the device to shut down, then restart. Bi Sun.

2.Clear cache: Go to your device's settings, find App Management, select the app that is waiting for an update, and clear its data and cache.

3.Check the network status: Make sure the device is connected to a reliable wireless network and try to change the network environment.

4.Update other apps: Updating other apps may affect your device's system updates and security updates.

5.Factory Reset: If none of the above methods solve the problem, you can try a factory reset, which will erase everything from your device

Hello, this problem of yours is a very numb limb ruler problem, many reasons will lead to the occurrence of this problem, I put forward a few suggestions, I hope it will help you.

1.If you have installed 360 Security Guard, it is recommended that you try it after completely uninstalling it, it is said that 360 has a system protection mechanism that sometimes has this kind of bug.

2.Check whether your computer is equipped with virtual tools, such as: virtual machine, virtual drive, windowing software d3dwindower, yy multi-opener, etc. If there is, uninstall it and give it a try.

3.Worms are viruses that take up your physical and virtual memory, making it impossible for you to install any software. This one is more troublesome.

Try opening Explorer to see if there are any programs that are taking up a lot of your memory, and if there are, terminate them with the latest antivirus. However, if this is the case, it is recommended that you reinstall the system.

4.Is your win7 multi-account? Make sure you're using an administrator account to access the system.

5.Press the F8 key on power, select Repair Computer, and repair it automatically.

6.I suspect you installed the system update with 360 Security Guard. If so, there is no other good way, either to restore the system or to reinstall the system.

This is when the IE kernel is executing, it conflicts with some other program;

Or if there is a problem with Bunsen, go to the official ** to see if there is a solution.

It is recommended to switch to a different browser.

Reinstall the IE or preferably reinstall the system.

I don't need to IE. IE is too rubbish.,It's okay to use chrome、Firefox、Opera.。 The most downgrade 360 can be used.

Always like that? You always let the big guys see what it's like.

It is recommended to use the 360 emergency disk to start the computer, and use it to reinstall the system.

Check for automatic installation software].

1,In fact, if the mobile phone automatically installs the software,There must be a software to execute,In this case,We can go through the phone's settings - traffic usage,See that the software uses too much slow traffic,You will know the problem。

2,After disturbing the number of traffic usage,There will be an Internet situation or traffic ranking,You look at the soft rubber piece is your own not commonly used,But it consumes a lot of traffic abnormal software,Uninstall it。

Uninstall the workaround].

1,If you find the software that the phone maliciously pushes,But when you uninstall it, it shows that it can't be uninstalled,Then this program may be the system pre-installed software,Need to solve the problem after the phone is rooted,You can first ** a kingroot software。

2. Open the kingroot software, and then directly click on one-click root, which will automatically obtain the permission of the mobile phone, and after obtaining the permission, you can solve the problem by repeating the uninstallation.

Third-party software detection].

1,There is also a situation that shows that the most used traffic is the Android system,Then in this case, if you want to detect virus software,Only if we use third-party security software,For example, use Tencent Mobile Manager - security protection - virus detection and killing。

2. After turning on virus scanning, directly select the bottom virus scan, and then wait for the scan results to come out, delete and uninstall the virus program, if it prompts that it cannot be uninstalled, you also need to root the phone.

If there is a problem with the drive, change the system, or leave it alone, and it will not affect the use.

You are not installed in the system,Install the ghost version of the system,There is a boot startup error,This is likely to be related to your installation package file,No installation successful,It is recommended that you reinstall the system,Install the pure version of the system is more stable,There will be no such problems,Then install the driver and the necessary software,There should be no problem。

The reason for this problem is usually because the computer system BCD file is corrupted, as long as the computer system BCD file is repaired, the computer will be repaired naturally.

1: Turn on, if there is still such a black screen** display, turn it off immediately, and then continue to boot up, if it is still this black screen ** display after booting, continue to shut down, and then turn on, try a few more times, about five times, you can see the blue screen when you turn on, with four big words written [troubleshooting], select the following (restore the computer) and then press the enter key, and then a small black box will appear, a bunch of **brush brushes, and after he stops, you enter (bootrec rebuildbcd) in parentheses, without parentheses! After losing, press enter, and then see if the page will show a lot of **, if there is a display, press enter to solve it.

If you don't see a lot of **, press enter, then type (bcdedit export c: bcd backup) and then type (ren c: boot bcd press enter, then type (bootrec rebuildbcd) and press enter.

Then your problem is solved.

Still not installed the system, the BCD guide is lost, it is better to reinstall the system, do not use PE installation, so the installation is not clean. It's better to install step by step, you can go to 5 to share to find a clean version of the system image.

Did you show up when you installed the system? Do you use a CD-ROM or a USB stick?