Why is my hardware installed on the computer really not showing up?

1. Check whether the camera is faulty.

2. Check whether the graphics card driver is installed correctly.

3. If the above is normal, then in the "My Computer" right-click "Properties" Device Manager to automatically detect whether there is a new hardware device, put it into the driver disc to automatically search for the driver to be in the G: disk.

4. If not, then test the camera on someone else's machine, which is basically his problem.

If the driver you installed is not accurate (note, it is not accurate), there may also be a situation where the system acquiesces to the correct driver, at this time the system thinks that the driver is installed correctly, and will cancel the notification icon inserted into the hardware, but due to the inaccurate driver, ** may still not be available.

,Official**,,Look at the model yourself,,I'm too stuck at home,,The web page can't be opened。

The camera is broken, replace it! (It's mainly a problem with the data cable, but it's not easy to change the cable only).

Brothers. Just restart your computer.

That is, your hardware is not equipped with drivers! Right-click on my computer, click Management, Device Manager, see which hardware has a question mark on it, and then right-click on the properties, update the driver, OK, the problem is solved! (You have to know what that hardware is, it's usually a graphics card, or a sound card!) ）

Install the smart on the computer without displaying the hardware, the main solution:

If there is no unknown device, then the computer must not recognize the hardware information of the **compression card, please use an eraser to scratch the gold finger. Or check whether the compression card is in good contact with the PCI slot of the motherboard.

3. If there is an unknown device in the device manager, but the driver still cannot be installed, please check the product barcode number on the back of the compression card. The first three digits of the barcode are the **compression card model. Press the model to install the corresponding software from the mid-dimension, and then install the driver.

4. If you still can't install the driver according to the operation of the third step, it is recommended to contact the customer service staff of Zhongwei Technology.

The solution is provided by the technician.

Repeat it a few more times, and then try to change the cable. It's likely that you're directly referring to the same questions.

Plug in the jack on the back of the computer and take a look!