Why can t the drawer of the refrigerator be opened?

It may be that the temperature in the fresh-keeping room is too low, and the drawer is frozen, of course, if it is not frozen, it may be that the way it is opened is not correct, it is recommended to look at the instructions should have the correct way to open.

The fresh-keeping drawer of the refrigerator can not be opened, generally there are the following two situations, first, there are too many things in the drawer, there is no blockage when pushing, but when the thing is pulled out, the thing is blocked, and the thing becomes a counter-column, and the temperature of the refrigerator is too low to cause the fresh-keeping place to freeze and freeze the drawer.

1. The reason why the freezer drawer is frozen:

1. The door is not closed tightly or the door seal is deformed.

2. Opening and closing the freezer door too often.

3. There are items with large moisture in the freezer.

2. Treatment method: turn off the power, open the freezer door, remove it after the ice softens, and then wipe it dry with a rag.

3. Preventive measures:

1. Close the door tightly or replace the door seal.

2. Open the freezer door as little as possible.

3. Seal the items with a large amount of moisture in a food bag before putting them in the freezer.

Do not force it to open, it is easy to break the refrigerator. As long as the power is cut off for a period of time, about three hours or so, it can be easily opened after the inside of the refrigerator naturally melts ice. dfgdf is not the temperature turned on too low and frozen.

If the drawer of the refrigerator cannot be opened, unplug the refrigerator first and let the ice cubes in the refrigerator melt. You can open it again in the future.

Is it freezing at a low temperature!! Try again after an hour of power off!

1. The refrigerator can't open the drawer, this problem is not difficult to solve, but it is a little troublesome. Adjust the temperature compensation of the refrigerator to 0 first, and then turn off the power. Once the ice has melted, the drawer can be opened.

At this time, take out all the contents of the drawer. The drawers are also all removed from the freezer, wait until the frost in the drawer melts naturally, pour out the stagnant water, and wipe dry with a clean rag. 2. As for the freezing in the freezer, it is not easy to melt all in a short time.

At this time, there is a little trick, even if it is a hair dryer.

1. The freezing room is mainly because excess water enters the freezer, which freezes at low temperatures, and the drawer is stuck and cannot be opened. Therefore, it is necessary to pay attention to the problem of stagnant water flowing into the freezer compartment at all times. 2. The water in the refrigerator is mostly because the drainage pipe of the refrigerator is blocked, and the water cannot be discharged in time, so when the water reaches a certain level, it flows out of the refrigerator door and enters the freezer.

Cause the freezer to freeze, pay attention to the cleanliness of the refrigerator, keep it dry, and clean the drainage pipes regularly. 3. Attention should also be paid to the use of the freezer, and the appropriate gear should be selected according to the rise and fall of the ambient temperature according to the seasonal changes. Pay attention to the problem of stagnant water inflow, clean it up in time, and do not form a thick layer of ice before processing.

This can be caused by the refrigerator door not being closed tightly and there is a lot of moisture in the freezer. The steps are as follows:

1. First of all, we need to power off the refrigerator, that is, unplug the power socket of the refrigerator.

2. Then let the ice in the refrigerator melt on its own. If the door is forcibly opened, it may cause damage to the refrigerator door.

3. When the refrigerator door can be opened, we need to remove the ice cubes directly from the refrigerator door and drawer.

4. Then take out the food in the refrigerator drawer and shake off the ice cubes on it.

5. Finally, remove all the ice at the bottom of the refrigerator drawer. When you're done, put the food back in and plug it in and freeze it. Tidying up your fridge frequently can also be an effective way to save electricity.

The drawer of the refrigerator can't be opened, maybe you didn't put it in at first, and then some of the ice cubes inside froze and froze him tightly, so at this time it is not impossible to tear it open with brute force, you can take out the dishes inside first, and then turn off the electricity slightly, and wait for some of the ice cubes inside to melt and open the drawer of the refrigerator.

You can just turn off the power and melt the ice.

It is recommended to regularly de-energize the refrigerator; Avoid using hard objects during de-icing and defrosting to avoid damaging the refrigerator evaporator pipeline; Turn up the temperature of the refrigerator compartment appropriately; Generally, 2 to 3 gears in winter and about 4 gears in summer are better.

1. If you are not in a hurry to use the refrigerator, you can unplug the power and let the ice cubes in the refrigerator thaw naturally, and then you can open the door of the refrigerator, which is safer for the refrigerator. 2. You can use a hair dryer to blow on the drawer to accelerate the melting of ice cubes near the refrigerator drawer. 3. You can find a hot towel, preferably a hot towel with good water absorption, put one end of the hot towel in the hot water basin, and the other end in the drawer of the refrigerator.

Reasons for this:

1. Freezing of the refrigerator may be caused by forgetting to close the door, or frequently opening and closing the door of the refrigerator. If you forget to close the door of the freezer compartment of the refrigerator or the door of the freezer compartment of the refrigerator is not closed tightly, it is likely to cause the phenomenon of freezing, resulting in the situation that the freezer freezing door cannot be opened.

2. The freezer may be due to the release of relatively hot food in the refrigerator, and when it is hot, the water vapor in the refrigerator evaporates and forms ice cubes. When using the refrigerator, take more care and do not put overheated food in the refrigerator, which will not only lead to freezing, but also cause an increase in electricity consumption.

3. It may be because the refrigerator has been used for a long time, and the sealing strip of the refrigerator has been aged and is not very sealed, resulting in the situation that the refrigerator is easy to freeze.

1. It may be that the refrigerator drawer is frozen; 2. It may be that the drainage outlet of the refrigerator room is blocked, resulting in poor drainage; 3. It may be that the temperature of the refrigerator is too low. Suggested solutions: 1. If the ice is thick, de-icing should be carried out in time, the power supply should be cut off first, and then the door of the freezer should be opened, the food should be taken out, and it should be cleaned up after it melts naturally.

It can also be cleaned with special cleaning tools, but it can not be cleaned with metal products to avoid damaging the pipeline, and you can also add a glass of boiling water to speed up the melting speed. 2. If the drainage outlet of the refrigerator is blocked, resulting in poor drainage, and the ice caused by too much water in the box, it needs to be checked first, and there is a drainage hole in the middle of the lower middle of the back wall of the refrigerator. 3. If the temperature of the refrigerator refrigerator is too low, and the melted water cannot be discharged when the refrigerator is shut down normally, resulting in freezing, you can check that there is a drainage hole on the back wall of the refrigerator refrigerator, and the melted water can be discharged from here during normal shutdown.

Open the small lid behind the refrigerator, you can see the head of the drainage, and you can blow the debris out by blowing the pipe. Then pour some water from the drain hole in the refrigerator and rinse it a few times.

First of all, the power is cut off and it can be opened after the frost has melted, and then the door seal will not be frosted next time with 80 degrees of hot water. Unplug the power to open the door, remove the frost, and wipe the water dry. If you want to melt all the ice inside, it will take a little longer, and during the automatic melting, you need to pay attention to whether the water will flow to the floor, and pay attention to wiping the water.

Extended Information: How to take care of your refrigerator:

The refrigerator should be cleaned regularly (at least 2 times a year). When cleaning the refrigerator, first cut off the power, use a soft cloth dipped in water or dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

In order to prevent damage to the coating on the outside of the box and the plastic parts inside the box, do not clean the refrigerator with laundry detergent, detergent, alkaline detergent, Tianna water, boiling water, oil, brushes, etc.

When the accessories in the box are dirty and dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

After cleaning, plug the power plug firmly in and check that the temperature controller is set in the correct position.

When the refrigerator is not in use for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dry.