What handmade can green Coke bottles be made

Simple windmills, which require empty Coke bottles, scissors, wire, vises. The steps are as follows:

1. First of all, cut the bottom of the empty Coke bottle horizontally.

2. Then cut the cola bottle lengthwise, divide it into six parts, fold it in the direction of the cap, and flatten it by hand.

3. Fold the blades again in the 90-degree direction, and pay attention to all the blades to be folded in one direction.

4. Wipe the cap and bottle clean, and then take a cap, the glue stick melts, and the cap sticks to the inside of the cola bottle, which corresponds to the direction of the other cap.

5. Put the wire on the gas stove, burn it red, and then burn the two bottle caps with holes in the center, which are slightly larger and convenient to operate.

6. Put the wire through the center of the two bottle caps, use a vice at one end, twist the wire into a loop to prevent it from falling off and pulling it out, and then try to see if it is lucky to be in front of the electric fan.

7. After it is done, it can be fixed on the balcony, and when there is wind, it will run by itself.

You can use a Coke bottle as a vase.

Materials to prepare: Coke bottles, scissors.

Precautions: To make the vase beautiful, the width of the spikes cut out of the plastic bottle should be consistent, and the distance between each spike and the bottom of the bottle should also be consistent. Since plastic is relatively light, you can add some stones to the bottom of the vase to increase its weight.

Production steps: 1. Prepare cola drink bottles.

2. Use scissors to cut from the upper part of the bottle body, pay attention to safety.

3. Cut the bottle in half.

4. Cut vertically, and stop when you cut to the position of the pattern.

5. Cut into thin strips of equal width.

6. Cut the bottle into thin strips of equal width all over the week.

7. Start weaving flowers and pay attention to finger safety.

8. First buckle the bottle down to make the ears cut out.

9. Until it is put over, it will no longer be retracted.

<>12, Article 2 also regulates the law.

13. Article 3.

14. The state of 3 has been folded.

15. The method of the same method is folded in turn.

16. The end is the same way, and the last 3 are tucked in turn.

17. The vase is completed.

18. The effect of flower arrangement.

You can make a green vase.

Materials required: plastic bottles (transparent ones used here), scissors.

Specific steps: 1. Use scissors to cut the plastic bottle, and pay attention when cutting. Try to start with a third of the way through. The tapered side is not to be left, leaving the bottom part.

2. Then start sorting out these thin strips. Pay attention to cut vertically, cut into thin strips of equal width, and stop when you cut to the position of the pattern.

3. When these thin strips are pressed outward, pressed into the shape of petals and begin to weave flowers, press down the thin strips, and buckle the bottle body downwards to cut out the ears.

4. Arrange the cut thin strips neatly and fold them inward (you can weave some shapes according to your preference) <>

5. After weaving, a flower basket is ready (you can paint the color on the bottle body, or graffiti) <>

I've seen it before, and I remember that you can cut the top vertically down into a lot of filaments, and then weave the filaments into various shapes. I'm afraid this is not a handicraft that ordinary people can play. You can also cut off part of it to make a small potted plant.

Handmade model of a Coke bottle.

Now that the weather is very hot in summer, if we come back from outside to drink a glass of chilled Sprite or Coke, it will be very cool, so the Sprite Coke we usually buy is more expensive, and there are a lot of additives in it, let us make a Sprite and Coke together.

Tools Raw materials.

Water (1) White vinegar (1).

Baking soda (1).

Sugar (1) Method Steps.

1 6 Step by Step Reading.

First of all, let's prepare a glass of water, whether it is mineral water or boiled water.

2 6 Then, add another spoonful of sugar, the amount can be decided according to the size of your container.

3 6 If you want to drink Coke, then we have to put in brown sugar, and after putting in brown sugar, it will be the same color as the Coke you usually drink.

4 6 Put in a spoonful of white vinegar, white vinegar can choose white rice vinegar, it is made of rice, if it is white vinegar, it is made of additives.

5 6 Then, put in another spoonful of baking soda, stir it with a spoon and there will be a lot of bubbles, and then the water in it will boil out.

6 6 Finally, add another slice of lemon if you like.

Ingredients: purified water, cocoa powder, coffee, baking soda, brown sugar, a glass bottle. The specific steps are as follows:

1. Prepare all the ingredients for making cola: baking soda, coffee, brown sugar, cocoa powder.

2. Add an appropriate amount of brown sugar to a glass bottle filled with purified water, and should not overdo it.

5. Then add baking soda powder to the glass bottle.

6. Finally, fill with purified water, shake the glass bottle vigorously to dissolve all the beverage ingredients evenly, and the homemade cola is completed. When opening, you should pay attention to opening the cap slowly to avoid a large number of bubbles.

Don't spend money to buy Coke, teach you to make your own Coke at home, and say that what you have drunk is good, saving money and practical.

Preparation: a Coke can, a mineral water bottle, a red piece of paper, scissors.

2. Then cut along the edge from the opening, leaving a large blank distance without clipping.

<>4, and then on the red crepe paper, draw a rooster head, and the cockscomb and corns should also be drawn.

5, then paste it on the mineral water bottle, arrange the chicken tail, and then hang the rope to make a rooster lantern.