There are a lot of stains on the floor after decoration, how to clean the paint on the floor after d

There are many stains on the floor after renovation, and the way to clean up the paint on the floor after renovation is if the paint falls on the floor tiles.

, you can first soak the paint in water and then wipe it off with a spatula. If there are traces left, you can wipe them repeatedly with a wet mop. If the paint falls on the wooden floor, you can apply some turpentine to the paint first.

Or wipe it with a cloth dipped in some gasoline and finally with water. After the house is renovated, there is still a lot of decoration garbage left indoors, so when cleaning the new house, be sure to ask enough people to help clean it, so as to improve the cleaning efficiency.

1.You can also use a cloth moistened with warm soapy water or a cloth stained with alcohol to paint the latex on the floor.

Cover, then let it sit for a few minutes to soak the latex paint before using a plastic spatula to remove the latex paint from the floor. Do not get too much soapy water or alcohol on the wooden floor to avoid moisture damage to the wooden floor. If the latex paint on the wooden floor is stubborn, we can use fine sandpaper to sand off the latex paint on the wooden floor, and then wipe off the remaining latex paint with a rag dipped in alcohol.

After the latex paint is cleaned, we can mop the wooden floor with clean water.

2.When cleaning up large renovation waste, it is necessary to clean up the house dust. If there is a situation, it is better to use a vacuum cleaner.

Clean. If you don't have a vacuum cleaner, it's a good idea to sprinkle some water indoors before sweeping to prevent dust from flying everywhere. After the dust is cleared, the indoor glass can be cleaned.

When cleaning glass, it is essential to master the correct cleaning techniques. Under normal circumstances, it should be cleaned with a clean, soft rag dampened with detergent. After washing, wipe off water stains on the glass with newspaper.

3.If it is a water-based paint such as ordinary latex paint and diatom mud.

It can also be scraped directly with a special cleaning blade, so you don't have to worry about being scratched. The above is the answer to the question of how to clean up the paint on the floor after decoration and how to clean up the paint on the floor after decoration.

Coatings are usually viscous liquids made of resins, oils, or emulsions, with or without pigments and fillers, with corresponding additives, and with organic solvents or water.

When laying floor tiles, some paint will remain on the surface after the construction is completed. So how do you clean the paint off the floor after renovation? First of all, check whether the paint is completely solidified, if not, you can use gasoline, alcohol, or organic solvents to clean.

If the paint has solidified, but not for a long time, you can consider using a rag dipped in gasoline, alcohol, or organic solvents to clean it, cover the surface of the paint for a period of time, and use a wallpaper knife to clean it after the paint has softened. Use the blade of the wallpaper knife to scrape gently.

However, if it is a very stubborn paint, it is best to use a simple soak of caustic soda on the premise of safety, and use a wallpaper knife to clean it up after softening the paint. If it is on the surface of the floor, wipe off the stain and rub it vigorously with Belle Franc or car wax. It is necessary to use a white cloth, because the variegated cloth will fade and the paint surface will melt away.

If the hardness of the tile is relatively high, you can directly use a shovel to remove it, and then you can also buy some special paint cleaners online, and you can also remove the paint.

It can be cleaned with a shovel, or with alcohol, with gasoline, with some soluble solvents.

Hit a basin of hot water, and then dip the towel in the water and gently wipe it off, the paint is easy to remove.

It is necessary to distinguish whether the wood floor is solid wood flooring or laminate flooring.

The treatment of paint stains on the two types of floors is different.

1. Treatment method of paint stains on laminate flooring: clean with sandpaper or knife, or clean with organic solution (such as gasoline, or nail sanitizer used by girls.

Yes). Because the surface of the laminate floor is wear-resistant and impermeable, it will not affect the decorative layer below. If you use a knife to gently scrape, you can see that the undertone is exposed. Scrape it all off and reapply the wax or oil, but it will definitely leave a mark.

2. Paint stain treatment method on solid wood floor: paint thinner can be used to clean paint.

When using, apply the thinner to the paint, and after the thinner is soaked, then brush with water to remove the paint. Repeat if necessary. The glue can be cleaned with a glue cleaner, which can remove the instant glue that has been polymerized.

Note: Both paint and glue can be removed by adding paint thinner to natural water. Stains can be wiped with small pieces of white cotton cloth moistened with natural water.

If it is on the surface of the floor, wipe off the stain and polish it vigorously with Bilic Franc or car wax. Be sure to use a white cloth, as variegated cloth will fade and paint the surface will spent.

If it is a floor tile, use a shovel to shovel off the more, and a few wipe it with banana water or sky blue water! The wooden floor has to be scraped with a razor, and you must be careful not to scratch the floor! There is only a thin layer left, which can be wiped with a rag dipped in banana water or sky blue water!

For smooth hard surfaces, you can directly use a shovel blade to remove them, while for rough surfaces and rough hard surfaces, you need to use common organic solvents to deal with them, and those soft furniture such as window lines, door frames and other vulnerable parts, if not completely solidified, you can use gasoline, alcohol, or organic solvents to clean, solidified seems to be a bit troublesome.

<> wipe it with water, in fact, before brushing the paint, you should first lay the ground with a cloth or kraft paper, so that it will not be stained by the paint. Garberry's service team does just that, and their service is very reassuring. This problem will be dealt with by the masons and painters during construction.

Because the homeowner must be clean to accept. Before Jiabaoli out of a lemon Meng Bao product specifically for the new home after the decoration of the residual paint traces, very easy to use, my family half a year ago after the decoration also bought this to clean, with the remaining half of the bottle, now occasionally used to wipe the kitchen stubborn fumes.

If it's just dripping paint on the floor, wipe it off with a cloth right away. If it has dried, the paper towel is moistened, spread on the paint, and the paint is well removed when it is wet and soft. It is best not to use organic solvents to avoid damaging the floor paint.

It depends on what kind of paint it is, if it is a water-based wall paint, you can use Tobdo water to hold it a few times, or use a dish towel with a thin dish soap without steel wire, if it is paint, use the day to take water, and then use beeswax to throw it.

Cement slurry can be used to clean the toilet, if the ground is non-slip bricks or antique bricks, the paint can be wiped with a rag dipped in water, and the oil-based paint can be wiped with ethanol solvent or alcohol. It is best to scrape off with a wallpaper knife. Depending on the nature of the coating and the added ingredients, the specific cleaning method is different.

If it is a general water-based paint coating, it can be treated by simply wiping it with water; In the case of traditional oil-based paints, some chemical solvents or even scratching may be required.

I think if there are a lot of stains on the floor after decoration, if you want to clean these paints, we can use detergents on the market to clean it, but we can't choose items that are too acidic or alkaline, because this will cause some damage to the floor, and try to choose a more moderate cleaning intensity.

In fact, you can buy a special detergent for cleaning, and the effect is also very good.

It can be cleaned with dish soap and soap, and there is also a special cleaning agent that can be purchased and treated for cleaning floor stains.

You can go and buy some paint thinner, apply the thinner to the fallen paint, and wipe it clean with a cloth.

In the process of house decoration and construction, it is easy to get all kinds of paint on the floor, so what should I do and how to clean it? Let's take a look.

1. If the paint on the floor is not completely solidified, it can be cleaned with gasoline, alcohol or organic solvents.

2. If it has solidified, but not for a long time, you can consider using a rag dipped in gasoline, alcohol or organic solvent to clean, cover the surface of the paint for a period of time, and use a wallpaper knife to clean it after the paint is softened. It should be noted that using the blade of a wallpaper knife to gently scrape will do, do not scratch the floor.

3. If it is a very stubborn paint, it is recommended to use caustic soda to soak it briefly under the premise of paying attention to safety, and use a wallpaper knife to clean it up after the paint is softened.

4. If it is a white paint that has been painted on the ground, it is recommended not to clean it, and then apply a layer of other paint after simple sanding, or lay the floor and tiles on it without asking the question.

1. If it is not completely solidified, it can be cleaned with gasoline, alcohol, or organic solvents.

2. If it has solidified, but the time is not long, you can consider using a rag dipped in gasoline, alcohol, or organic solvent to clean, cover the surface of the paint for a period of time, and use wallpaper to clean up after the paint is softened. Use the blade of the wallpaper to scrape lightly.

3. If it is a very stubborn paint, it is recommended to use caustic soda to soak it briefly under the premise of paying attention to safety, so that the paint can be softened and cleaned with wallpaper. 4.If you are asking about white paint that has been painted on the ground, it is recommended not to clean it, but to simply sand it and then apply another layer of paint.

Or lay the floor, tiles are no problem.

Material preparation: paint cleaner, rag.

Step 1: Spray the paint on the floor with a paint cleaner (paint cleaner is a fast and effective solvent-based cleaner that can effectively remove paint dirt from the floor).

Step 2: Then let it sit for 3 minutes.

Step 3: Use a rag to wipe off the dissolved paint dirt.

Step 4: When decorating, the paint on the floor has been cleaned.

The floor is generally paved with floor tiles or solid wood flooring, so the floor paint is applied to the floor, how to use this so-called floor coating? This topic needs to be discussed together, first of all, we know that the use of floor coatings will make the floor more beautiful, which reminds me of the epoxy floor coatings introduced in the previous article, and then we will take you to take a lookThe floor is coated with morning material

You can use soap and a little ammonia and turpentine mixture, you can remove a lot of dirt, use viscous transparent glue to repeatedly stick and tear, you can remove some of the surface with a little dilute sodium water, or use oil to paint thinner. Most of the current wall paint is water-based paint, which is easier to wipe, as long as you use a rag to stick to the decontamination powder, you can wipe it off quickly, pay attention not to wipe it with a steel wool ball, you can use a hair dryer to dry, and then wipe it with a cotton swab dipped in nail polish. Wipe with wind oil.

Wipe with a special cleaner or sneaker stain remover. With the 4B eraser used for drawing, it is very soft, and the Korean eraser can erase it. If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before wiping it.

Second, the introduction of floor coatings

1) Ordinary floor coatings. At present, polyurethane floor coatings have been widely used, and the coating film is bright and plump, wear-resistant, water-resistant, oil-resistant, alkali-resistant, and UV-curing coatings suitable for assembly line production.

2) Cement floor coating. It is used to coat the cement floor and improve the use function of the cement floor. Cheap perchloroethylene or styrene tar cement floor paint and polyvinyl butyral cement floor paint.

3) Seamless floor coatings. It is formulated with synthetic resins, pigments and fillers, etc. At present, synthetic resins lacking imitation pins are commonly used, such as polyvinyl acetate (emulsion), polyvinyl formaldehyde (aqueous solution), polyurethane (two-component), epoxy (solvent-free), etc.

4) Polyurethane elastic floor coating. It is composed of two-component polyurethane coating cured at room temperature, and during construction, components A and B must be mixed in a certain proportion.

5) Anti-static floor coating. It is usually made of polyurethane resin or epoxy resin as the base material, with special conductive materials, pigments and fillers, curing agents, etc.

6) Anticorrosive floor coatings. Unsaturated resin or vinyl ester is usually used as the base material, with accelerator and curing agent.

The above content is a wonderful introduction to floor coatings, I hope every reader can hear and see it, and can be applied in real life, you will benefit a lot. Well, today's introduction to the content of floor coatings is here, thank you readers and friends for reading this article and your strong support and love, if you want to get more home improvement information, please continue to pay attention.

1. How to clean the latex paint on the floor: if the latex paint is not dry, you can wipe it with a wet rag to clean the latex paint.

2. Mix sawdust and water together, sprinkle it on the floor stained with latex paint, and wait for about ten minutes to wipe it off.

3. Mix soapy water and wipe the area stained with latex paint.

4. The mixture of oxalic acid and water can remove the latex paint, and the subsequent waxing can be carried out according to the demand.

1. If the latex paint is not dry, the hole can be wiped with a wet rag to clean the latex paint.

2. Mix the sawdust and water together, sprinkle the liquid on the floor stained with latex paint, and wait for about ten minutes to wipe it off.

3. Mix soapy water and wipe the area stained with latex paint.

4. With a mixture of oxalic acid and water, latex paint can be removed, and waxing can be carried out according to the needs of Daixiang.