-
The essentials of pile transfer operation.
1. Pour into the B warehouse from the right parking space (starting point).
1 Check that the vehicle is parked in the correct position, that the wheels are straight, and that the steering wheel mark is facing up.
2 When the No. 6 lever is in a straight line with the No. 1 lever, the steering wheel is killed to the right, 3 When the No. 5 lever (front center bar) is exposed on the right side of the rear windshield, the steering wheel is turned back to the left 1 turn, 4 When the front center bar is exposed at the right rear side triangle window, the steering wheel is killed to the right again, 5 Look back at the left side mirror, when the No. 1 lever (left rear lever) appears, the steering wheel quickly turns back to the left 2 times, the red dot is facing up, 6 Stretch out the head to look at the left sideline, pay attention to keep the body parallel to the sideline, 7 When the car 2 3 is in storage, turn back and look forward at the bottom of the front center bar, the ground road out of about 20 centimeters immediately stopped.
Steering wheel action: Kill to the right — 1 lap back — Kill — 2 laps).
2. Move from library B to library A (2 advance and 2 retreat).
1 Forward and backward, all of which can be killed by turning the steering wheel to the right first.
2 As soon as you enter, after the left corner of the hood is aligned with the middle bar, look at the sideline back to the direction (to the left to kill), when the body is about to be parallel to the sideline, the steering wheel is turned back to the right for 2 turns, 3 One retreat, after the right corner of the hood is aligned with the middle bar, look at the sideline back to the direction (to the left to kill), when the body is with.
The side line is about to be parallel when the steering wheel turns back to the right 2 times, 4 two in, and when the center of the hood is about to align with the right side lever, look at the sideline back to the direction (to the left to kill) when.
When the body is about to be parallel to the sideline, the steering wheel turns back to the right 2 times, 5 two retreats, through the rearview mirror to see the tailgate, the rear center bar moves to the left side of the tailgate glass when the direction is fast back (to the left to kill), the head sticks out to see the center line, and the car enters the garage after a lap of braking. In fact, if the car is parked very right, it is okay to brake without turning back. The main reason for turning around is that the front wheel is crooked and knocked off by infrared.
3. Proceed from Jiaku to the left parking point.
1 When the left front corner of the hood presses the boundary line one foot after the car exits the second garage, the steering wheel is killed to the left, 2 2When the right corner of the hood is aligned with the boundary line (or pillar), the steering wheel returns to the right for 2 revolutions and then brakes. Stick out your head to look at the front wheels, and check whether the body is stopped, and correct it in time if there is a deviation in reversing.
Fourth, from the left parking point into the first warehouse.
1 When the lever is aligned in a straight line 50 centimeters in front, the steering wheel is killed to the left, 2 When the front middle lever overlaps with the lower part of the rear gear of the small window corner, the steering wheel is turned back to the right 1 and 1 4 turns, 3 When the front middle rod overlaps with the lower part of the front gear of the small window corner, the steering wheel is killed to the left again.
4 Look at the right side mirror, when the No. 3 lever (right rear bar) appears, it will turn back to the direction 2 times, the red dot is facing up, the 5 heads stretch out to see the center line, and the body will stop immediately after entering the first garage.
Steering wheel action: Kill to the left — back 1 and 1 4 turns — kill — go back 2 laps).
-
It must be slow, the speed of the car is slow, you have enough time to hit the direction, even if you hit the wrong one, you have a chance to save the car back, you can control the car to move, not too fast, and you can't stop. Find the reference point of the benchmark and the car, look at the window or door, or the coach will stick a mark on the car, and hit the direction when the mark is made, and there is no problem if the program is familiar, inverted is the easiest to pass, the road test is to test the person, remember the program when practicing, and then practice more, everything is OK.
-
After hanging the reverse gear, go slowly, when the garage's six poles and one pole are aligned with the difference between the person, the direction is killed, slowly reverse into the garage, and when the rear of the car is far from the bar, the direction is correct. ok
-
Be patient, be careful, practice more, remember the points told by the coach and combine them with your own practice methods, you will definitely be able to pass the test!
-
A: Generally, it is 5000 kilometers to swap it. Cross-transposition. Front Left to Rear Left, Back Left to Front Right, Front Right to Back Right, Back Right to Front Left.
If only two tires are replaced, the requirements for coaxial tires are the same.
-
There is a saying. What the coach says is generally the golden rule... Nothing is the most effective, the coach teaches you the usual way ...
-
The skill is what the coach said, to what position to play the direction, what position to return to the direction, practice a few more times can pass, it is not difficult to reverse the pile, the key is to master the rhythm, don't panic.
-
Find a wide place to turn at right angles, stop at a 90-degree angle, go back and forth n times, remember the turning radius of your vehicle, and after arriving at the parking lot, it is generally the horizontal line of the rear of the car over the parking space to hit the wheel. When the car mirror just passes the front of the car next to it, return to the wheel. (I'm talking about vertical parking lot) when parking horizontally Park next to the car in front of you want to parking space, the wheels are about 2 meters next to the vehicle, reversing with full wheels, and when the reflector passes through the front and rear of the car, return to the wheel.
The specific timing should be bold and careful, don't be afraid of being embarrassed, and the old driver is also from the novice period. Stop, look, and fall.
-
I've always thought that it was easier to park in a parking space straight down, that is, when there is at least one car as a reference, and if you rent a parking space, you won't, you have to pour several handfuls, adjust the rearview mirror to see the line, and summarize it is still the first floor of the senior brother's right, follow the method and steps to practice a few more times, steady progress,
-
What the coach teaches is generally general knowledge, and you have to look at it yourself in practice to find out the feeling.
-
Vehicle turning:
Step 1: Determine the direction of the turn and turn on the turn signal;
Step 2: Reduce the speed of the vehicle and push the gear lever into the appropriate low gear;
Step 3: Turn the steering wheel according to the curvature of the road;
Step 4: Turn the steering wheel back to the right after turning and turn off the turn signal;
Key points: When the vehicle turns, the direction should be slow and slow back, pay attention to the turning angle, turn right into the second or third lane, turn left into the first lane, and take the second lane.
Reversing driving: Pay attention to the surrounding environment and situation before reversing, select the reversing route, and see whether there is an oncoming car before and after. Honk your horn before reversing and starting. When reversing, you should stabilize the accelerator, control the speed, do not go fast and slow, the speed should not exceed 5 kilometers per hour, and master the operation method of "slow driving, fast steering".
Pay attention to the situation in front of and behind the car, make sure that there are no pedestrians or obstacles in the "dead corner" behind the car that you can't see, and then reverse. Reversing in a straight line, both eyes must be fixed on the target behind the car, and the direction is straight backwards; When turning and reversing, the curvature of the wheel track that is closed on the front outer wheel is greater than that of the rear wheel, so pay attention to the front outer wheels, fenders and bumpers, and turn purposefully, and avoid the car reversing and then turning the steering wheel strongly.
That's pretty much it, and the rest has to be slowly experienced, good luck.
-
Control the speed well, have a good sense of direction, and have a good sense of direction in your heart.
-
Pay attention to which side you are falling, as long as the distance and position of one side are suitable, there is no problem on the other side. The main thing is to practice more, and when to hit how many directions depends on feeling. Just adjust the speed of the car and take your time.
-
The inclination of the body also has a lot to do with it, so you can stand outside the car and take a good look, and then connect with the movements in the car.
-
Actually, you don't need to be very skilled!! The main thing you look at is the rearview mirror!! Just look at the approximate location.
-
Many of today's cars have reversing radars.
-
On the first day of learning to drive, the newbie learned a lot of practical skills!
-
Pull the handbrake or step on the brake pedal first, then hang the reverse gear, let go of the kill or foot pedal, see if there are obstacles in the left and right front and rear through the reversing mirror, visually measure the distance from the obstacle position with your eyes, and refuel a little, note that this series of actions need to be coherent and coordinated, and the car needs to be operated in the case of starting, and it is easy to cause slipping if the engine is turned off.
-
First step on the brake clutch, pull up the handbrake, hang the reverse gear, release the brake, slowly lift the clutch, and slowly feed the oil at the same time, wait until the body shakes, release the handbrake, and then give the oil at the same time.
-
01 People who carefully observe the turning path of the car are actually not difficult to find that the radius of the front wheel is actually greater than the radius of the rear wheel when the car turns, so it is easy to block the rear wheel when the front wheel can turn when driving.
02 Because the rear wheel turning radius is smaller, so when reversing, as long as the rear wheel bypasses the obstacle behind it, the front wheel will also be able to pass, but some relatively narrow spaces should pay attention to whether the front wheel of the car will hit other obstacles when reversing, otherwise it is easy to cause damage to the corner of the front of the car, as long as you remember these two points, it is easy to reverse successfully.
03 When reversing into the warehouse, you should also pay attention to making the body perpendicular to the storage position, parallel to the line on one side, about one meter away, and then drive backwards.
05 Until the direction of the body is consistent with the direction of the storage position, the steering wheel will be corrected, and the vehicle will be reversed slowly until it is put into storage.
-
1.I can't figure out the direction: don't get there before reversing, put your hands on the steering wheel and think about it, you have to use your own brains to think, now call the car to ** down, just hit a few more times.
2.Parking is not correct: when learning to drive, do you have to look back from the rear of the car, the head sticks out and the line drawing of the garage is parallel (you are novice can drive from the reversing mirror, not in the probe), and you can find a similar parallel line reference when actually reversing;
3.When the body is parallel, the body is positive, and when you see the car parallel, you will immediately return to the right, (don't think about saying that the car still has an inertia to let it go a little, there is nothing to do) in the direction of the car to the left point to the left, and to the right point if you want to let the rear of the car to the right.
Here are some tips and precautions when reversing:
1.After reversing into the garage, the vehicle is too close to the left or right sideline.
Correction method: Look at the rearview mirror of the vehicle, and correct the direction of the vehicle from which side of the line width. Push the steering wheel slightly, generally at 30-60 degrees, and return to the steering wheel immediately after correction.
2.When the vehicle is put into storage, it is too close to the center bar and far away from the side bar.
3.When the vehicle is put into storage, it is too far away from the center rod and close to the side bar.
Correction method: Hold the speed of the car, quickly go back to the dangerous side bar direction for 4 laps to the end, hold the rear of the car close to the storage position, and the car immediately return to the positive direction for 2 laps. At this time, you should also pay attention to the side that is prone to collision, that is, if you see the rear bar in the rearview mirror near the side bar, it will be positive.
-
1. First of all, let's introduce right-angle parking, as long as there is an open space on the right side of the body when you reverse, this trick is very effective. First of all, the car forward two parking spaces, the driver's position in the second parking space, parking, the car and the parking space of the car interval of about one meter, about open the door do not touch the other party's vehicle, to the left to kill the reversing, feel the front of the car and the parking space perpendicular, back to the steering wheel, hit the steering wheel, reverse into place, you can.
2. The second kind of side parking, the essentials of operation: parallel to the parking space vehicle, spaced by meters, and reversed. When the reversing mirror of your own vehicle is parallel to the center pillar of the front and rear doors of the parked vehicle, it begins to hit the wheel in the direction of the killing.
When the vehicle is parked at a 45-degree angle to the parking space, hit the direction to the left, and always turn the front of the car back to the direction. As for how big the 45-degree angle is, you need to feel it when you are reversing.
3. Finally, diagonal parking, oblique parking is somewhat similar to right-angle parking, and it can also be done in one step. When your vehicle is moving forward, when your left reversing mirror is aligned with the car adjacent to the parking space you want to park, hit the direction to the right and continue to drive forward for a while. Drive some distance to the right front, and when the vehicle is parallel to the parking space to be parked, return to the right direction and reverse directly into the parking space.
4. When reversing, try to choose to reverse from the left side (if conditions permit). The left side is convenient for the reversing person to observe, and in the process of reversing, you should first look at the back, and then pay attention to the rearview mirrors on both sides. The lateral distance on the right side is greater than on the left.
Because the turning radius of the front wheels is larger than that of the rear wheels, the front of the car will be thrown outward when reversing, and it is easy to scratch on the right side if you do not pay attention to this. The speed in reversing is mainly idling, and the body is corrected in time. The reference point of each car is different, and the timing of the direction is different, so I will not generalize here.
-
Many novice friends always turn crooked when reversing, in fact, this is because the timing of the direction is wrong, and I will teach you today.
-
Can't figure out the direction? It's very simple, you can turn the steering wheel which way you want to fall, and the coach should say something about the right position when parking, just remember.
-
Since you are a novice, there is nothing to blame, it is normal for the technique to be bad, about reversing, you have to know how many degrees your wheels rotate when the steering wheel is turned, grasp this degree, your skills will improve by leaps and bounds, practice more, and stabilize some best.
-
You can reverse the car in whichever direction you want it to turn.
Two cars in parallel, when the driver and the tail end of the car next to it is at the same level, the direction is killed and reversed, after entering, when the rear of the car is fast-pressing, the direction of the foot is reversed, and the car is just in place when it is straight.
-
Just practice a lot.
I didn't stop every time I came down and looked at it, and then I stopped and came down and looked at it, and so on.
-
Novices are like this.
Don't be afraid to practice more, be careful and you will feel it slowly.
Driving is all about practice.
Inverted mold, the original meaning of this word is a kind of **, powdery, becomes viscous after adding water, and is hard shell after solidification on **. The main ingredient is gypsum. It is divided into two types: cold and hot film. >>>More
The essentials of walking in unison are as follows:1. When you hear the command of "walk in unison", take your left foot forward about 75 cm, land on the ground in the order of the heel first and then the sole of your foot, and move the center of your body forward at the same time, and move your right foot according to this method: the upper body is upright, leaning forward slightly: >>>More
In our country, welding operations need to be licensed, welders are the type of work that belongs to the access category, in the professional qualifications of skilled personnel, only five of the 81 types of work in the access category, welders are one of them, and the actual situation is that most of the industry practitioners are unlicensed operations. With the continuous standardization of technology and the relevant requirements of the industry, more and more people want to take a welding certificate, the advantage of the certificate is still very large, first of all, the salary of the certificate and the non-certificate are very different, often able to reach more than double or higher level. Therefore, the issue of short-term welder training has naturally become a concern for practitioners. >>>More
The day of the fall of the family is the day of the underworld. There are two types of inverted days, the first of which is determined by month: the first month of the lunar calendar and the Renyin of the seventh month. >>>More
It's just passing by where an old friend lives! ~