What are the hazards of rock slabs to the human body?

There is no harm. Rock slabs.

It is a natural inorganic and environmentally friendly material that does not release radioactive substances.

It is a sintered stone, which is pressed by natural raw materials through a special process and with the help of a press weighing tens of thousands of tons, and goes through 1,500 degrees Celsius.

It is fired at a high temperature.

It has the characteristics of large specifications, strong plasticity, diverse colors, high temperature resistance, wear and scratch resistance, acid and alkali resistance, anti-penetration, environmental protection and health. It is widely used in home furnishing and kitchen plates.

and other fields. <>

Characteristics of rock slabs.

1. Scratch resistance: Mohs hardness.

Over 6 degrees, resistant to scratches and attempted scratches.

2. Corrosion resistance: resistant to various chemicals, including solutions and disinfectants.

Wait. 3. Easy to clean: only need to wipe with a wet towel to clean up, no special maintenance needs, simple and fast cleaning.

4. All-round application: break the application boundary, cross the border from decorative materials to application materials, design, processing and application are more diversified and extensive, and meet the application needs of high standards.

The above content refers to Encyclopedia - Rock Slab.

Disadvantages of rock slabs: 1. Rock slabs are prone to burrs when the pressure is not enough, which requires the process, so you need to pay attention to it when purchasing; 2. The production process of rock slab is very demanding, so the cost is relatively high. Advantages of rock slabs:

1. Fireproof and high temperature resistance - no discoloration when burned at high temperature, no harmful substances will be released; 2. Excellent chemical properties - high temperature resistance, frost resistance, corrosion resistance, acid and alkali resistance, non-combustible materials; 3. Scratch resistance, impact resistance, stain resistance, antibacterial and easy to clean; 4. Zero water absorption, zero permeability, food-grade surface.

Question: Do you need to brush the interface agent on the rock slab in advance when using cement mortar to pave the rock slab?

Questions are needed. Can you recommend to me what kind of interface agent to brush?

Meichao, Shengbang, Henkel and other are all good.

Hello dear<>

Glad your question, what are the disadvantages and hazards of rock slabs? Disadvantage 1: The rock slab may be prone to burrs when the pressure is not enough, which has high requirements for the manufacturing process and processing equipment of the rock slab. 2. The production process of rock slab is very demanding, so the cost is relatively high.

Then it's higher than ordinary tiles. 3. Although the whole body rock slab of our Weilang tile is resistant to high temperature and wear and scrape, and the physical and chemical properties of the whole body are very good, the large size and thin rock slab make the rock slab have a chance of damage during transportation, so it is not easy to transport. Merit.

First, the appearance of the atmosphere, green environmental protection has been said before, marble is of high grade and good-looking, but the natural plate will be more or less radiant, if the whole wall is paved, it will be harmful to the health of the family. The stone and wood source rock slab not only has an atmospheric appearance, natural, no seams can be seen, the most important thing is green environmental protection, paving this kind of board at home, it is really safe and worry-free. Second, ultra-thin and light, simple construction to know that natural stone leakage because of its own weight, it is not easy to go on the wall, if it is not handled well, it is common to smash down.

The rock slab overcomes this limitation, the thickness is half of the ordinary tile, ultra-thin and light, and the paving construction is simply not too slag-saving. No wonder the background wall is not pasted with marble porcelain such as repentance bricks, compared with which rock slabs are now popular! 3. The waterproof and high-temperature resistant rock slab has low water absorption, and it can be wiped lightly, without leaving traces, and it is resistant to high temperatures, even if the ingredients are cooked here, it will not be affected at all.

Difficult to cut: The hardness of the rock slab material is large, and the difficulty of fine cutting is great, which has certain requirements for construction technology.

Expensive installation: Because of the special material, the process requirements are high, the rock slab is high, and the installation cost is generally high.

High transportation requirements: The laying of rock slabs is generally a large-area construction, so in the transportation project, the protection requirements for rock slabs are high, and the transportation requirements are relatively high.

The qualification standard is not perfect: rock slab is a new type of material, and there is no unified product standard for it in the current market. So in the market, it has mixed reviews.

2. What kind of material is rock slab?

Rock slab is a new type of plate made by special firing technology, which is the top product in the plate industry at present. It can withstand a variety of processes such as cutting, drilling, grinding, etc.

At the same time, the rock slab restores the stone texture and natural color, combined with a variety of fashion elements, which can create a high aesthetic decoration effect.

3. What kind of decoration is the rock slab suitable for?

Based on the five advantages of "thin, hard, soft and light", rock slabs have been welcomed by many people and are widely used in decoration. Common kitchen countertops, wash basins, dining tables, floors, integrated basins, building facades, etc.

Fourth, rock slab PK marble.

Some people also say that the comparison between rock slab and marble is that marble is more practical and cost-effective. Then let's take a look at the advantages and disadvantages of marble now.

Pros:1The texture is delicate, solid, the texture is natural, and there are many patterns.

2.Easy to process, strong decoration, low water absorption, high durability and wear resistance.

Cons: 1It contains many impurities, is susceptible to corrosion, weakens the gloss and has poor aesthetics after long-term use.

2.The elasticity is poor, it is easy to break by impact, the permeability is high, and the stain is difficult to clean.

3.The weight is large and the plate is thick, the connection processing gap is large, and the aesthetics are poor.

Hello, I am your emotional Daxin teacher, your question has been seen, you will be answered within 5 minutes, please be patient.

Hello, glad for your question. Rock slab is made of natural raw materials through a special process, pressed by a press, combined with advanced production technology, after more than 1200 high temperature firing, can be cutting, drilling, grinding and other processing processes of large-scale new porcelain panels. Advantages of rock slabs:

The rock slab has large specifications, more colors, high temperature resistance, wear and scratch resistance, anti-penetration, acid and alkali resistance, etc. Disadvantages of rock slabs: 1. The large slabs produced by ceramic materials are relatively thin and brittle.

2. Because it is brittle, it will rupture if it vibrates, so it is not easy to transport. 3. The surface of the ceramic material slab is hard, not easy to cut, and the construction difficulty is high. 4. The ultra-thin and brittle characteristics of rock slab determine that it is not easy to process, and the requirements for processing equipment and processing technology are high.

Hello dear, glad to answer for you. Rock slabs, also known as artificial stone, have many advantages, such as being durable, easy to clean, beautiful, etc., but at the same time, they also have some disadvantages and hazards, which are as follows:1

Heavy weight: The rock slab is very heavy, heavier than other decorative materials, so it is necessary to pay attention to the installation and handling, and special equipment needs to be used, otherwise it will endanger life safety. 2.

Difficult to repair: Although the rock slab has the advantage of being strong and durable, once it is damaged, it is more difficult to repair, and professional technicians are required to deal with it. At the same time, rock slabs are also prone to fractures, cracks and other problems, affecting the service life.

3.Higher cost: rock slabs are higher, their processing and manufacturing speed is slower, and they require a lot of manpower input, so the cost is relatively high.

4.Contains VOCs: Some rock slabs may contain volatile organic compounds (VOCs) during the manufacturing process, which are highly volatile and volatile if prepared for high summer temperatures, causing harm to health.

The above is mine, I hope these contents can help you, thank you for your understanding and support, I will continue to work hard.

Is it good to put the rock slab on the wall of the whole house?

The answer is yes! More and more designers are beginning to focus on the use of rock slabs, and more and more consumers are willing to integrate rock slab materials into their homes.

<> rock slab makes up for the uncontrollable texture of natural stone, poor moisture and mildew proof wood veneer, short life of wall cloth and environmental protection, etc., so that rock slab can be applied to almost all spaces of decoration.

The wainscoting element is an important part.

In fact, the concept of wainscoting has been around for a long time, whether it is the paving of the whole wall or the appearance of "wall skirts", it has been widely accepted.

However, the rock slab has a strong moldability, which makes the application of the rock slab far more convenient than the uncontrollable marble. The variety of colors and textures also gives designers an extremely open space for collocation.

Use as a TV backdrop.

The rock slab extends the application of wainscoting, and it can also be used as a TV background wall, dining table background wall, sofa background wall, bedside background wall, and so on. Appropriately supplemented by lighting to set off the atmosphere, a sense of grade arises spontaneously.

<> slabs are available in a variety of patterned colors.

As a wainscoting, rock slabs have distinct advantages.

Rock slabs are universal building materials. The so-called omnipotence includes both "decorative" and "functional".

<>Di Shang Design" rock slab wainscoting application case work.

Compared with natural marble, the texture of the rock slab is more controllable, and the effect as a decorative wainscoting is one of the reasons why it can quickly become popular as a "dark horse" building material, and its performance in terms of functionality is also very good.

The rock slab itself has high density, high hardness, and cleanliness, and does not require special maintenance.

Prefabricated installation, convenient + fast + environmental protection.

As mentioned earlier, the rock slab does not need to be treated like ceramic tiles, and because the rock slab is a customizable board, it has been cut to size in the factory, and it can be installed directly after entering the site, and there are many styles of 'continuous pattern' design as wall panels, which can be said to fully meet the individual needs of designers and homeowners.

Effect of applying rock slabs.

The slabs are 'rigged', where the wall is primed with a carpentry board and then a metal hook is used to secure the slab.

Extended application of rock slabs: composite properties.

Graphene smart warm tile.

With the blessing of this new technology, rock slabs have more abundant use scenarios, and they have developed comprehensively in the direction of beauty, function, environmental protection, fast assembly, and technology, and I believe that more and more consumers are willing to use rock slabs in their homes.

Rock slab is a new type of environmentally friendly decoration material, made of natural stone powder, feldsz stone and other natural raw materials, with the following advantages:

1.The size of the rock slab is large, with 900 2600mm, 900 2700mm, 1800 3600mm, 1600 3200mm, etc., which can be realized from one piece to the top and has strong decoration.

2.The fire coefficient of the rock slab reaches A1 level, the safety factor is high, the water absorption rate is low, the product is not deformed, does not fade, and is almost not affected by the change of external temperature.

3.The high density of the rock slab and the extremely low water seepage rate make it easy to clean and care for because no stains can remain on its surface, and no water stains can penetrate into it.

Rock slab is a new type of material that is particularly popular in China in the past two years, basically all the home design magazines will appear in it, in fact, this material has a long history of use in foreign countries, its English name is Sintered Stone, which means "sintered stone", which is made of natural raw materials through a special process, with the help of more than 10,000 tons of press pressing (more than 15,000 tons), combined with advanced production technology, after more than 1,200 high temperature firing.

It is precisely because of the high density and high temperature firing of rock slabs that it can withstand cutting, drilling, grinding and other processing processes, and can be widely used in home decoration, furniture and other industries.

For rock slabs, you may hear all kinds of rock slab furniture the most, such as rock slab dining tables, rock slab coffee tables, etc., but in fact, the wall finishes, fixed bar counters, TV background walls, kitchen countertops, etc. involved in home decoration can be made with rock slabs.

Regarding the rock slab, the biggest controversy among the owners is which is better, it or the tile. Personally, I think that if your budget is enough, it is still recommended to choose rock slabs, because rock slabs have the following advantages compared to large tiles

1. Compared with ceramic tiles, rock slabs can be made larger and thinner.

The large size of the slab means that the paving can make the whole space present a stronger sense of wholeness and more atmosphere, if you like the feeling of "one top to the sky", then the slate is very suitable for you.

In addition, because it is large enough, there will be fewer joints when paving, which is convenient for installation and daily maintenance.

In addition, in terms of thickness, take the wall finish as an example, the general tile slab will go to the thickness of more than 11mm to achieve the thinnest, but the thinnest rock slab can be 3mm so thin. Especially in Beijing, Shanghai and Guangzhou, where every inch of land is valuable, this is simply earned!

2. Stronger antifouling and antibacterial.

Many friends complained to me that the home is paved with natural marble or tiles, which is easy to yellow and discolored after a long time, and if you don't do it in time, the dirty things will penetrate into the stone and can't be wiped off at all.

But if it is a rock slab, you basically don't need to worry about this problem, because the water seepage rate of 1/10,000 of the rock slab is a new indicator in the field of artificial building materials.

3. Scratch resistant.

Those who think that the cabinet countertop with artificial quartz stone is too ugly, but the use of marble will crack friends, rock slab can solve your concerns, the color of the rock slab is naturally needless to say, the key is that it is more than 6 degrees on the Mohs scale, the hardness of the marble mode is between, use the rock slab to make the countertop, directly cut vegetables are OK, even chop the bones are not afraid, of course, the premise is that you have to pad the cutting board.