What is the structure of a flush toilet?

Flush toilets are the most common toilets, and almost half of all households will choose flush toilets. Flush toilets can reduce water consumption and worry about not flushing cleanly. The most important thing is that the flush toilet is quite cost-effective.

The lower left is the water supply pipe of the water tank, and a water closing valve is attached to the water supply pipe to adjust the water intake. Along the water supply pipe, you will see the bucket tank filling pipe, through which the water is injected into the tank. Next up are the overflow pipes, floating arms, floats, and float valves.

The reason why they are put together is because they work together when flushing the toilet. Its principle is as follows, the water will continue to flow through the main water pipe of the bucket tank into the water tank, so how to stop it if it is full? That's where the float comes in.

As the water level rises, the float will also go up because of the buoyancy, until it reaches a certain extent, the float rotates the float valve to a reasonable position through the float arm, so that the float valve will block the nozzle of the bucket cylinder water injection pipe, and there will be no more water. In this case, the overflow pipe passes the excess water through it into the pipe below, so that the excess water does not flow out and onto the ground. In the lower part there are also steel ropes, guides, ball plugs, flush valve seats, which work together with the handle and start lever.

The principle is that when you turn the handle to flush the water, the starting lever also moves upward, and the starting rod and the steel rope ball plug are integrated, which directly leads to the separation of the ball plug and the flush valve seat, and the water is flushed down the pipe, which achieves the effect of flushing the toilet. When your hand is released and the handle is no longer turned, the ball plug moves downward due to the gravity of the steel rope, and the guide device allows the ball plug to move in a fixed direction, so that the ball plug accurately plugs the flush valve seat and the water in the tank does not flow from the pipe. When the water level in the tank drops, the float falls, and the float valve is also moved by the linkage floating arm, so that the water inlet is not plugged by the float valve, and the water will naturally enter again.

The toilet has become a part of our daily life, but do we really understand the flush toilet? Although the direct flush sewage method is not known to many people, and the principle of sewage discharge is not known, I believe that you have seen the following direct flush toilet structure diagram, and have a deeper understanding of the toilet of the direct flush method. Because the speed of the direct flushing method is relatively fast and the water flow is also very strong, the sound of flushing will also make a lot of noise, and the diameter of the pipe for sewage discharge is relatively large, so it is not easy to block.

This is one of the biggest advantages of a flush toilet. For more information, let's start with the structure diagram of the flush toilet! The water accumulation area of the flush toilet is relatively small, and this method is also relatively concentrated, which can quickly discharge the filth and increase the flushing effect.

From the straight-flush toilet structure diagram, it is relatively simple, and the straight-flush toilet structure diagram of this way also makes us understand the convenience of the direct-flush flush, and when installing the straight-flush toilet, compared with the siphon toilet, the steps will be much simpler. And you can also decorate according to the structural diagram of the flush toilet designed in advance. Energy conservation and emission reduction have always been the most important focus today.

In daily life, we are also constantly advocating environmental protection and energy saving, and the use of direct flush toilets can save a lot of water! Judging from the structure diagram of the flushing toilet, the sewage pipe of the device under the toilet is relatively large, so that the device can better discharge the filth, and will not cause blockage to the sewer pipe, although it can save a lot of water, but the sound of flushing is relatively loud, and the anti-odor performance is not very good. Although we learned a lot of advantages from the structure diagram of the flush toilet, the disadvantages should not be ignored!

The flush toilet is to use the momentum of the water flow to discharge the dirt, the general pool wall is steep, the water storage area is small, so that the hydraulic concentration increases, the water force around the circle increases, and the flushing efficiency is high. Using the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is less, and there is no leakage. Because the flush type uses the instantaneous and powerful kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud.

The rear drainage is mostly a direct flush type. The flush toilet drain pipe has a large diameter, which is easy to flush down larger dirt. In fact, no matter what flushing method of the toilet is chosen, there will be a place to worry about and worry about, from the perspective of water saving alone, it must be slightly better than the straight flush type, but if there are quiet elderly people at home, it will be considered.

Diagram of the internal structure of the toilet:

The working principle of the flush toilet is roughly around its components, that is, when we use the flush toilet, we will press the waterproof button on the top of the water tank, and the button will pull the plug up through the lever.

At this time, the water in the tank will flow out, when the water in the tank is discharged, the outlet plug will automatically fall, in order to block the water outlet, and then the float will be because the water level in the tank drops, driving the lever to pull up the water plug, so that the water can enter the tank.

The flush toilet is to use the momentum of the water flow to discharge the poop, the general pool wall is steep, the water storage area is small, so that the hydraulic concentration is concentrated, the falling water around the toilet circle increases, and the flushing efficiency is high.

Advantages: The flush toilet flushing pipeline is simple, the path is short, the pipe diameter is thick (generally the diameter is 9 to 10 cm), the gravitational acceleration of the water can be used to flush the poop clean, and the flushing process is short.

Compared with the siphon type, in terms of flushing capacity, the flush toilet does not have a backwater bend to take a straight flush, which is easy to flush down larger dirt, and is not easy to cause blockage in the flushing process, and there is no need to prepare a paper basket in the bathroom. In terms of water saving, it is also better than siphon toilets.

Disadvantages: The biggest defect of the flush toilet is the loud flushing sound, and due to the small water storage surface, it is easy to scale, and the anti-odor function can not be as good as the siphon toilet, in addition, the direct flush toilet has fewer varieties in the market, and the selection surface is not as large as the siphon toilet.

The structure of the toilet bowl is divided into three parts, namely:

1. Water tank: including float, water supply pipe, overflow pipe, water stop valve, box, water inlet ring, etc.;

2. Toilet seat: divided into flowing water holes, sealing rings, water seals, drainage pipes, toilet bases, etc.;

3. Toilet cover: There are two parts: the cover plate and the seat ring.

In addition, the toilet bowl also has components such as a water supply pipe and an angle valve, which works on the following principles:

When pressing the water release button to pump water to the toilet, the button pulls the lever, and the water plug will be pulled up by the lever, and the water in the water tank will naturally flow out, when there is no water in the tank, the water plug will automatically fall down without the buoyancy support of the water and live in the water outlet, in the same way, the float will fall after it has no buoyancy, and pull the water plug into the water to pull it up, so that the water can enter the water tank.

After reading the above, I believe you have a clearer understanding of the structure and working principle of the toilet reputation.

A toilet bowl usually consists of the following parts:

1.Toilet: A toilet is the body of a toilet bowl and is usually made of ceramic or plastic. It has an opening for draining the Tanpants Hill waste into the drain.

2.Flush tank: A flush tank is a container used to store water, usually located at the back or upper part of a toilet. It includes a tank cover, a flush button, and accessories inside the tank, such as a water level regulator and flush valve.

3.Base: The base is the structure that supports the toilet and is usually made of ceramic or plastic. It has a drain hole for connecting the drain pipes.

4.Fitting accessories: The toilet also includes a variety of mounting accessories, such as bolts, gaskets, seals, etc., for mounting and connecting other parts of the toilet.

The structure of the toilet is divided into three parts, namely the water tank, the horse manuscript mu barrel seat and the toilet cover, in which the water tank includes float, water supply pipe, overflow pipe, water stop valve, box, water inlet ring and other structures, the toilet seat is divided into flowing water holes, sealing rings, water seals, drainage pipes, toilet base and other structures, and the toilet cover has two parts, cover plate and seat ring, in addition to the toilet bowl has water pipe and angle valve and other structures. The toilet is also called a toilet. Toilet is a sanitary appliance in the field of building water supply and drainage materials.

Outlet classification.

The outlet is divided into lower drainage, (also called bottom row) and horizontal drain (also called back row). The horizontal drain is on the ground, and a hose should be used to connect it to the back outlet of the toilet. The drain at the bottom row, commonly known as the floor drain, only needs to align the drain of the toilet with it when using.

Split. The split toilet has a high water level, sufficient punch, and many styles, which is the most popular. The split is generally a flush type launch, and the flushing noise is large.

Because the water tank and the main body are fired separately, the yield is high. The selectivity of the reverence is limited by the pit distance, if it is much smaller than the pit distance, it is generally considered to build a wall behind the toilet to solve the problem. The water level of the split is high, the flushing power is strong, and of course the noise is also loud.

The split style is not as good as the one-piece one.

Siamese. The shape of the conjoined toilet is more modern, the lower level of the split water tank is lower, and the water used is slightly more, which is generally higher than the lower body. The trapped body of the hole is generally a siphon type of sewerage, and the flushing is silent, because the water tank is fired together with the main body, which is easy to burn out, so the yield is low.

Due to the low water level of the conjoin, the pit spacing of the conjoined is generally short, in order to increase the flushing force. The conjoined body is not limited by the pit distance, as long as it is smaller than the pit distance of the house.

Toilet is an indispensable part of modern life, let us better deal with personal hygiene problems, toilet mainly has two kinds of toilet and squatting toilet, of which the toilet is what we often call the toilet, the structure of the toilet is much more complex than the squatting toilet, so what is the structure of the toilet? Let's take a look with Qeeka Home experts.

1. What is the structure of the toilet?

The structure of the toilet is divided into three parts, namely the water tank, the toilet seat and the toilet cover, in which the water tank includes a float, a water supply pipe, an overflow pipe, a water stop valve, a box, a water inlet ring and so on, the toilet seat is divided into a flow hole, a sealing ring, a water seal, a drainage pipe, a toilet base and other structures, and the toilet cover has two parts, a cover plate and a seat ring, in addition to the toilet bowl has a water pipe and a corner valve and other structures.

2. What are the types of toilets?

1. According to the external structure.

There are two main external structures of the toilet, one is conjoined type, and one is split type, mainly according to the area of the bathroom to choose, split toilet is a more traditional design, is connected with screws, sealing rings, the second layer of the water tank, etc., so the space to occupy is larger, and the connection is easy to accumulate dirt, and the conjoined toilet is beautiful as a whole, is integrally formed, ** relatively expensive.

2. According to the direction of sewage discharge.

There are two directions of toilet discharge, namely the back row and the lower row, the rear toilet can also be called the wall row and the horizontal row, the height of the center of the sewage outlet from the ground is generally 180mm, the lower toilet is the ground row and the vertical row, the sewage outlet is on the ground, and the sewage outlet is generally 400mm, 305mm, 200mm from the wall.

3. Press the water method to divide.

The toilet is divided into two types of drainage, direct flushing, siphoning, the sewage effect is different, the direct flushing toilet directly discharges the dirt with the help of the flushing force of water, so the sewage outlet will be relatively large, it is also deeper, and the flushing sound is also loud, and the siphon toilet is to form a siphon effect in the sewage pipe by flushing water to discharge the dirt, the sewage outlet is small, and the noise is small.

Summary: The above is an introduction to the structure of the toilet, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia to consult.