The trick to remove the scale of the toilet is too thick, and what to do if the scale of the toilet

How to remove the scale from the toilet is very thick:

1.Use sandpaper to remove toilet dirt: You can find some fine sandpaper to rub to remove the dirt from the toilet bowl, this method can remove the toilet bowl dirt that the remover can't remove.

2.Vinegar to remove toilet dirt: Get vinegar from the kitchen and mix it with water, soak it for half a day, and easily brush off the toilet dirt.

3.Bleach solution to remove toilet dirt: Wipe it with bleach solution first, and then rinse it with water after a while.

4.Homemade small brush to remove toilet dirt: the flush toilet produces yellow dirt, which is difficult to clean with a brush, you can tie the waste nylon socks to one end of the stick, dip it in foaming detergent to scrub, clean it once a month, and keep the toilet white.

5.Detergent to remove toilet dirt: first put an appropriate amount of water in the toilet, clean it with a toilet brush, then pour in 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it.

If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean. Hydrochloric acid is very corrosive, if you clean it with hydrochloric acid, you should pay attention to safety and do not splash on it.

6.Shampoo to remove toilet dirt: Many people are afraid that toilet detergents such as hydrochloric acid will harm children, so they dare not let children learn to clean toilets.

In fact, most of the toilet detergents on the market today are neutral; If you don't feel at ease, its practical shampoo is enough to clean a dirty toilet.

The scale of the kettle is too thick to be cleaned, just sprinkle a handful of worthless things, and the scale can fall down in a few minutes, saving time and effort.

Tips for removing the limescale that is too thick: 1. Pour an appropriate amount of white vinegar into the toilet, soak for about ten minutes, then scrub with a brush, and finally rinse the toilet. 2. Sprinkle an appropriate amount of baking soda into the toilet, pour hot water and soak for about 20 minutes, then rinse.

3. Pour the cola into the toilet and soak it for about an hour to remove the dirt.

The toilet belongs to a kind of sanitary appliance in the field of pure materials for building water supply and drainage, and the commonly used materials are marble, fiberglass, ceramics, etc.

The toilet can be divided into split toilet and one-piece toilet, which can be divided into straight flush type and siphon type according to the flushing method, and the siphon type is divided into jet siphon type and vortex siphon type.

Common cleaning methods for toilets: spread evenly with toilet paper, pour the toilet cleaner on the toilet paper, after a period of time, use a brush and toilet paper to wash it back, and then rinse it with water.

If you are in a supermarket that sells that kind of limescale cleaner, you can just buy a pack. Tear open a pack of limescale detergent and pour it into the container, inject hot water, and fully soak the inner wall of the container in water. If the dirt is particularly stubborn, soak it for a longer time.

If not, here's how:

1. Put some paper scraps in the bottle, then pour in warm salt water, shake gently for a while, and the scale can be removed.

2. You can pour about 500 grams of baking soda with a concentration of 1%, or heat the vinegar into the bottle, shake it gently, and the scale can be removed.

3. Slightly break the two egg shells, put them into the bottle, then fill the half tea jar with cold water, plug the bottle cork and hold it down with one hand, hold the neck of the bottle mouth with your thumb and other fingers, and hold the bottom of the bottle with the other hand, and rotate and shake it up and down, left and right. After about 20 seconds, remove the cork, pour out the eggshell, and rinse twice with water.

4. Use 250 grams of vinegar, heat it and pour it into the hot water bottle, soak it for a few hours, and then shake it up and down, left and right, and the scale in the bottle will fall off.

5. Take 200 grams of dilute hydrochloric acid and soak it in the bottle for a while, and then shake it to remove the scale in the bottle.

6. Pour the water in which the noodles are boiled into the bottle, shake for a few minutes, pour it out, and rinse it with water to clean it.

7. Take some sunshine leaves or pumpkin leaves and cut them into pieces of 3 cm to 4 cm square, put them in the bottle, add a little cold water, gently shake the hot water bottle a few times, pour it out and then wash it with water.

Just buy a toilet brush to clean with the toilet cleaner.

Limescale in the toilet, pour the leftover Coke into it, and flush it after an hour.

Use a cleaning ball dipped in some toilet cleaner (or white vinegar) to scrub repeatedly.

Plug the drain, fill with water and pour in vinegar.

1. Mix salt and vinegar together, stir, dilute the salt in vinegar, heat, dip the liquid with an absorbent sponge or rag, put it on the rust spot, and cover it for more than 20 minutes. Then use a coarse cloth dipped in a salt and vinegar mixture and scrub vigorously to remove.

2. Sprinkle a circle of toilet detergent along the edge of the toilet, cover the toilet lid, scrub with a toilet brush after about 10 minutes, and then flush.

3. You can use Coke, pour Coke, after 20 minutes, for the scale is too thick, you can appropriately extend the time and dosage. After cleaning, it works very well.

4. Oxalic acid, daily miscellaneous, hardware stores are sold, pour it into the toilet and wait for ten minutes to flush it with water. Note: Do not dilute with water first, if you have a chemical taste, please turn on the exhaust fan.

How to quickly remove toilet dirt.

Toilet bowl cleaner or something, if you don't want to use it, you can also add vinegar to water, pour it into a container with scale, let it stand for a few seconds, and then wash the inside with a brush to remove the scale.

No matter how thick it is, pour a bottle of toilet cleaner into it, brush vigorously, and then the ash will be clean.

Buy a bottle of Coke brush, it works!

With hydrochloric acid, the effect is absolutely obvious.

The porcelain pools, bathtubs, and MTs at home have been used for a long time, and it is inevitable that rust spots and scale will be left behind, and it is really not easy to remove them. To deal with rust spots, Ms. Zhou's method is to mix salt and vinegar together, stir, dilute the salt in vinegar, heat, dip the liquid with an absorbent sponge or rag, put it on the rust spots, and cover it for more than 20 minutes.

Then use a coarse cloth dipped in a salt and vinegar mixture and scrub vigorously to remove. To deal with limescale in the bathtub, use white vinegar: mix it with water in a ratio of 1 to 5 and you will easily remove limescale.

The scale in the faucet and other places is more stubborn, you can remove it and soak it in white vinegar for 20 minutes, and the scale will disappear. As for the limescale in the MT, Ms. Zhou said that it is enough to pour the leftover cola into it and flush it after an hour. Stains and limescale on the glass door of the bathroom can be easily removed with a small glass of white wine.

Pour more toilet cleaner and soak it for more than ten minutes, and it will be easy to remove.

Supermarkets can buy toilets.

Sensen LED lighting).

Installing a drinking water antiscaler in the inlet pipe of the toilet tank that is specially designed to remove limescale can solve the problem completely.