How to maintain the smart toilet? What to do in the event of a malfunction?

Smart toilets need to do a good job of separating dry and wet, and turn off the power regularly. Let's take a look at the maintenance and repair methods of smart toilets with life.

First of all, we need to do a good job of dry and wet partitioning of the bathroom: smart bathrooms are all electrical products, so it is best to do dry and wet partitions in the bathroom. Keep the power outlets in your smart restroom dry.

Second, turn off the power when not in use: Turn off the power in the bathroom if you don't use it for a long time to prevent the bathroom from getting wet. Pay attention to proper maintenance on a daily basis

Pay attention to cleaning the toilet every day, and do not rinse the surface and back of the smart toilet with water to prevent accidents such as electric shock and short circuit. Do not use detergent on the surface and back of the smart bathroom, and do not put burning objects such as lit cigarettes into the smart bathroom.

Because smart toilets have many functions, they are more prone to some faults than ordinary toilets. Here are some common causes of smart toilet failures and how to deal with them.

Automatic flushing does not stop: The toilet flush sensor is faulty. The easiest solution is to sit on it again, and as soon as the toilet senses it again, it will stop getting water. If it still doesn't work, it means that the sensor is damaged, and it is enough to find a professional to repair it in time.

Seat cushion not heated: If there is a failure of no heating, check the remote control, heating wire, and temperature sensor in time for any problems or damage.

The smart toilet is not responding: first check the power supply to see if the contact is good. If there is no response after powering on, check whether the components are connected properly. If none of the above is a problem, check the computer board again.

Remote control is not responding: The smart toilet remote control is not responding. It could be that there is a problem with the remote control or the smart toilet.

Life should always be modest, encounter some bad things should be repaired immediately, when not in use can unplug the power, you can also gently put the cover plate on it, it is best not to wash the surface with water. to get a good maintenance. When there is a failure, it should be repaired through after-sales.

Smart toilets need to be cared for during use. Doing a good job of maintaining a smart toilet can extend its lifespan. If there is a failure, you need to contact the manufacturer for on-site repair.

During maintenance, it must be cleaned more, and parts must be replaced in time. In the event of a breakdown, you can apply for after-sales service or buy a new one.

1. If the seat ring is not heated, it may be that the resistance at both ends of the heating wire is abnormal, or it may be that the temperature sensor parts are damaged, and new accessories need to be replaced according to the actual situation.

2. If you encounter the problem of air temperature is not hot, it may be because the drying device is abnormal and you need to replace a new computer board.

3. If there is no response, it may be that there is a problem with the power supply or the reset key panel, and you need to reconnect the power supply or replace it with a new reset key panel.

Nowadays, smart toilets are becoming more and more popular, and there are many consumers who react after using them, and various problems will occur in the process. After all, smart toilets also belong to electrical appliances, and it is normal for them to malfunction. Sometimes we can do our own research first, don't rush to find after-sales service.

1. Common faults of smart toilets.

1. Smart toilets are prone to the problem of seat seats not being heated, although many smart toilets have played relevant advertising leaflets, saying that their toilet seats can be heated, so that we will never feel cold on the toilet lid when we go to the toilet.

2. The smart toilet is also prone to the problem that the air temperature is not hot, or it has the effect of washing, but the water is not hot, and the water sprayed out is cold, so it cannot play the function of cleaning.

3. There may be no response, after plugging in, the smart toilet does not have any response, and its touch screen display will not light up.

Second, the maintenance method of common faults of smart toilets:

1. If there is a problem that the seat is not heated, we need to check whether the resistance of the seat heating wire is abnormal. In addition, it may also be related to the temperature sensor, you can replace a new seat, and the temperature sensor parts can be replaced, so as to effectively solve the problem that the seat is not heated.

2. If you encounter the problem of whether the air temperature is not hot, you need to check its drying device, in addition, if the computer board fails, it will directly lead to the air temperature is not hot, and in the state of power-on, the voltage is kept at 220 volts, otherwise it will also affect the heating function, or the computer board is damaged, directly replace a new computer board, it will be able to operate normally.

3. If there is no response, there may be a problem with the power supply. In addition, it is also related to the computer board and its panel, its contact indicator and so on are not responding, it may be that its reset key panel is going to be replaced.

Under normal circumstances, if you buy some brands of smart toilets, it is relatively rare for these major faults to occur. However, if the use is not standardized or the purchase is a miscellaneous brand, there is a problem, you need to find brand after-sales service personnel to solve it.

1. Blockage:If it is a soft object blockage, it can generally be solved by using a simple dredging tool, and if it is a hard object blockage, it is generally necessary to disassemble the toilet to dredge.

2. Water leakage:If the toilet tank fittings are aging or damaged and out of order, it is generally a problem with the floating or sewer sealing cover, and it can be replaced.

3. Installation problems:Use glass glue or cement when installing the bottom, and do not seal the screw holes at the bottom of the toilet bowl during installation.

4. Button failure:The most common is the double button, if the button fails, you can replace it directly.

Precautions for the use of smart toilets.

Smart toilets are products that use electricity, and should not be flushed directly with water when cleaning. If you are going to use a cleaning solution, test it in an inconspicuous place to make sure it does not damage the exterior before applying it to the surface. Do not allow the detergent to soak the product when cleaning, and scrub it clean immediately after adding detergent.

Do not scrub with a rough surface such as a brush or rinse pad, but use a soft, damp sponge or cotton cloth. When cleaning the seat, do not use corrosive chemicals, but use a product that is listed as suitable for seat cleaning. Do not use force when cleaning the turned up lid ring to avoid damaging the product.

When choosing a smart toilet, we must choose a merchant with good after-sales service.

Because when there is a problem, the merchant can help us solve it in time, which is the best.

Question: The toilet bubble head whines, but no bubbles come out.

There are many common faults in smart toilets, and there are many smart toilets that the water is not hot, and there are also the phenomena that the seat temperature is not heated and the wind temperature is not hot. In addition to this, there may be problems such as leaking toilets, clogged toilets, and malfunctioning toilet buttons. These are all common faults of smart toilets.

If there is a phenomenon that the water is not hot, then you should see whether the temperature setting of the controller is at room temperature, sit and wait for 10 minutes, if there is no heat, please unplug the measurement water tank and add ** The resistance at both ends is about 92 ohms, and then measure whether the two ends of the heating tube have a resistance of about 92 ohms, if not, the fuse wire is broken, the resistance value at both ends of the measurement temperature sensor (25k 80k) is normal, if it is normal, the computer board is broken, such as changing the water tank, after changing the detection is normal, if the water has been heating, the computer board is bad to be replaced together. If only the air temperature is not hot, then the smart toilet troubleshooting method: measure whether there is 89+ -4 ohm resistance at both ends of the heating wire frame, if not, the drying device is broken, if so, confirm the correct seat, press the drying button to measure whether there is 220V voltage at both ends of the heating wire frame socket, if there is no voltage, the computer board is broken.

If the dryer is replaced, the computer board should be carefully inspected. Note: If the short circuit between the motor slots sometimes slows down due to the increase of load, resulting in the open circuit of the heating wire frame, it will also lead to the scorching phenomenon of the computer board D882, then please replace the computer board and the drying device at the same time.

If only the seat temperature is not heated, then the smart toilet troubleshooting method: use the remote control to set the heating state (sit and wait for 10 minutes) If there is no heating, please unplug the seat ring and add ** to measure the resistance at both ends is about 960+ -50 ohms, if there is no heating wire open circuit, if the resistance at both ends of the measurement temperature sensor (5k 15k) is normal, is the connector in good contact? If it is normal, the computer board is broken.

If the seat is changed, check whether it is normal after the change, and if the seat has been heated, the computer board should be replaced together.

As can be seen from the above, there are still many common faults in smart toilets, but generally speaking, they can be solved by themselves according to the above methods, if they really can't solve it, then they need to find professional staff to repair it.

Before the question, there was water coming out, and I pulled the plug and turned it on again.

Answer: But what if the smart toilet is not under warranty? At this time, it is recommended to find a master to come to the door, and the smart toilet repair master of Baixiu network has been engaged in the maintenance industry for many years, has rich maintenance experience, good technology, thoughtful service, and guaranteed maintenance, so you can rest assured to consult!

The smart toilet repair shop is there.

Good morning, kiss is happy to answer for you, there will be some common faults in the service kiss toilet, the following are some of the faults that appear and how to solve them1Poor flushing: If the water pressure is insufficient or the scale and dirt in the tank are blocked, the water pipes and water tank can be cleaned.

2.Loud flushing: If the water is flowing too much or the water pipe is not dredged, it can be inspected and cleaned.

4.Failure of the water disturbance function: the water heater is faulty or the temperature sensor is damaged, which needs to be inspected and repaired.

5.Abnormal water temperature: There is a problem with the temperature sensor or the water temperature adjustment switch is out of order, and it needs to be checked and repaired.

6.The automatic heating of the cushion does not work: it is a faulty heater or a circuit problem that needs to be checked and replaced.

7.Excessive odor: It is caused by the accumulation of dirt inside the toilet bowl and needs to be cleaned and disinfected.

A smart toilet is a high-tech product that combines traditional toilets and various electronic technologies to provide users with a more user-friendly and convenient experience. However, smart toilets can also have a variety of faults, and here are some common faults of smart toilets: Unable to flush:

It may be caused by water source problems, water valve problems, water pump problems, etc. Flushing failure: It may be caused by water blockage, circuit failure, solenoid valve failure, key failure, etc.

Heating function failure: It may be caused by the fault of the circuit, heater, thermostat and other reasons. The water temperature is not high enough or too high:

It may be caused by a faulty thermostat, a faulty heater, a water source, etc. Failure of automatic lid opening and closing: It may be caused by sensor failure, circuit failure, etc.

Failure of air heater function: It may be caused by air heater failure, circuit failure, etc. Unable to adjust the amount of water:

It may be caused by solenoid valve failure, water pipe problem, circuit failure, etc. Water tank leakage: It may be caused by the failure of the water tank itself, the failure of the internal seals of the water tank, etc.

Too much garbage in the tank to flush: It is recommended to clean the inside of the tank regularly. In short, like other electronic devices, smart toilets also need regular maintenance and maintenance, if the above failures occur, it is recommended to refer to the relevant instructions or seek the help of professional and technical personnel for repair and treatment.