The difference between a siphon toilet and a flush toilet

The difference between a siphon toilet and a flush toiletFlush toilets use the gravitational acceleration of water to flush out filth, so they use less water each time.

2. The flushing sound is different: the siphon toilet adopts the suction sewage method, and the impact sound of the water flow is very small, which is generally called a silent toilet. The flush toilet uses the powerful energy of the water flow to flush away the filth, so the sound of hitting the pipe wall is relatively loud.

3. The flushing effect is different: the neck of the siphon toilet is generally slender, and the water surface is very high when flushing, and the filth goes down with the water. The water seal is high, and it is not easy to reflux.

The straight-flush toilet has a simple pipeline, a short path, and a thick neck, and can easily flush the filth by using the gravitational acceleration of water, which is not easy to cause blockage, but is easy to produce peculiar smells.

Siphon.

The diameter of the siphon pipe is about 56 cm, which is converted into a water area, which is about three times worse than that of the direct flush type, so it is very easy to block when flushing. This is not the case with straight rushes.

The siphon pipe is very high, long and thin, because the smaller the pipe diameter, the more obvious the effect of the siphon, the greater the pumping force, and the more water-saving, and the more water used for direct flushing.

How should you choose a toilet? What is the difference between flush type and siphon type? Comparison of their advantages and disadvantages.

First, the direct flush toilet is the use of the water flow of the force to discharge the dirt, the general pool wall is steep, the water storage area is small, so that the hydraulic concentration, the falling water around the circle increases, the flushing efficiency is high.

Using the large thrust formed by the compressed air, the flushing speed is fast, the impulse is large, the sewage is strong, the speed is fast, the water is less, and there is no leakage. Because the flush type uses the instantaneous and powerful kinetic energy of the water flow, the sound of hitting the pipe wall is relatively loud.

Second, the structure of the siphon toilet is that the drainage pipe is of the " type, and a certain water level difference will occur after the drainage pipe is filled with water, and the poop will be discharged by the suction generated by the flushing water in the sewage pipe in the toilet.

Because the siphon toilet flushing is not with the help of water impulse, the water surface in the pool is larger, and the flushing noise is smaller.

The differences between a siphon toilet and a flush toilet are:1. The decontamination ability is different, the siphon toilet can better flush off the dirt on the surface of the toilet, while the direct flush toilet can flush off the larger dirt.

2. The ability to save water is different, the siphon toilet will consume more water relatively speaking, while the flush toilet can be cleaned with less water consumption.

3. The anti-odor ability is different, the siphon toilet adopts an S-shaped pipe, and the toilet path is relatively long, so the anti-odor ability is relatively good; On the other hand, the pipe of the flush toilet is relatively straight and the path is short, so the ability to prevent odor will be relatively poor.

The above content refers to Encyclopedia - Flush Toilet.

The differences between siphon toilets and flush toilets are as follows

1. The siphon toilet uses the siphon principle, the drainage pipe can form a certain water level difference after being filled with water, and the sewage pipe can produce suction to discharge the dirt when flushing, while the direct flush toilet is simple and rough, and the air compression is formed by the water flow impulse to form a thrust to discharge the dirt.

2. The siphon toilet is easy to flush away the dirt on the surface of the toilet, and the flushing effect is relatively thorough. The flush flush toilet is more concentrated, the flushing efficiency is high, and it is not easy to form a blockage.

3. The siphon toilet has a good anti-odor effect with a water seal effect, while the direct-flush toilet is easy to leave dirt and the anti-odor effect is not very good.

4. The diameter of the pipe in the direct flush toilet is large, the structure is simple and there is no water trap, the path is short and the flushing force is large, which is not easy to cause blockage, and the inner diameter of the siphon toilet pipe is complex and contains a trap, which is bound to affect the sewage effect in the future, so there is no direct flush toilet with strong blockage ability.

First, the principle is different.

1. Flush toilet: a back-drain toilet that uses the thrust formed by compressed air.

2. Siphon toilet: When the siphon toilet is flushed, a little water will accumulate in the toilet first, and then the pipe will become a vacuum, resulting in a siphon phenomenon, and the excrement and water will be sucked down.

Second, the characteristics are different.

1. Flush toilet: The drain pipe of the flush toilet has a large drainage diameter after being straight, and it is easy to flush down larger dirt.

2. Siphon toilet: the slope of the pool wall is slow, and the noise problem has been improved; It has the characteristics of strong sewage discharge capacity and large clean surface.

Third, the disadvantages are different.

1. Flush toilet: noisy and unsightly.

2. Siphon toilet: the water storage area at the bottom of the pool increases.

Encyclopedia - Siphon toilet.

Encyclopedia - Flush toilet.