The practice of bird s nest, the easiest way to make a bird s nest

Preparation materials: waste cartons, pens, rulers, carving knives, scissors, glue, adhesive tape, kraft paper, rivets, plastic wrap, etc.

Step 1: We need to draw a simple drawing with the craftsman.

Step 2: Take out the carton, usually a larger one, and then disassemble it and lay it flat.

Step 3: According to the drawing, draw the various parts of the bird's nest on the carton.

Step 4: Then rivet the parts with rivets or glue them.

Step 5: The effect of the initial construction.

Draw a rough drawing, and draw the parts of the desired bird's nest on the carton according to the drawing. Then, with a carving knife, scratch out the unwanted parts. At the same time, the edges that need to be folded should be set aside.

Then the individual parts are riveted with rivets or glued together. Then wrap the outside of the nest in plastic wrap to prevent water leakage when it rains. Then wrap it in another layer of kraft paper, which not only prevents the birds from destroying the plastic wrap, but also prevents the plastic wrap from reflecting light, and the birds dare not live in it, and adds another layer of protection.

The easiest way to make a bird's nest is as follows:

1. Material preparation: several wooden boards, chainsaw.

2. Fix the wooden board and make a wooden box.

3. The middle is separated by a wooden board.

4. Punch a hole on one side to make the gate of the bird's nest.

5. Sawn from the middle and changed into a small house.

6. The top herringbone is spliced at 45 degrees (a reinforcing strip should be added inside).

7. The herringbone after splicing (the simple way can also be without 45 degrees of splicing, with the method of 90 degrees at right angles) spine.

8. Fix the roof (the roof is slightly wider than the bird house), and you can also make another bedroom on it, and make up for it with a little filling (it doesn't matter if you don't do it); After painting, the "split" bird house is completed.

The role of the bird's nest:

1. The nest can prevent the eggs from rolling apart and make the eggs pile together. Keeping eggs in clumps is especially important for birds that hatch a large number of eggs at a time.

2. The bird's nest is conducive to feeding the brooding birds and avoiding predators. Since many birds can build their nests in very hidden places, it is difficult for the nest to be found by predators.

3. The nest can maintain the optimal temperature required for the development of eggs and chicks. The bird's nest plays a role in slowing down heat loss. Talk about teasing.

4. Nesting behavior is conducive to bird breeding behavior.

The function of the nest is generally believed to be that it first gathers the eggs together, so that all the eggs can be hatched by the parent bird in the nest at the same time. Bird nests are mostly woven of plant fibers, animal feathers and bird feathers, etc., which have a certain thermal insulation effect, which can slow down the cooling of the hot eggs due to the short-term departure of the brooding parent bird from the nest.

The bird's nest is made as follows:Heat loss hood melting, hot glue.

1. Apply hot glue to the hot melt adhesive. 2. Glue all the hot melt adhesives together. 3. Glue out the outline of a house.

4. Take out a long hot melt adhesive and stick it diagonally with two rows of glued hot melt adhesive to the long hot melt adhesive. 5. Then cut off the excess. 6. Make a door of the right size with hot melt adhesive.

7. Make a layer of wall in the back and seal it with a small piece of hot melt adhesive. 8. Stick some short hot melt glue on the door, and the bird's nest is ready.

Method 2:

To make a bird's nest, you need to prepare: waste cartons, pens, rulers, carving knives, scissors, glue, adhesive tape, kraft paper, rivets, plastic wrap.

1. Start by drawing a sketch on paper.

5. Then connect the various parts with rivets, as shown in the figure below.

7. Then wrap the outside of the bird's nest with plastic wrap to prevent water leakage when it rains.

8. Then wrap another layer with kraft paper, which not only prevents the birds from destroying the plastic wrap, but also prevents the plastic wrap from being reflective, and the birds dare not live in it.

9. Finally, the bird's nest is completed, as shown in the bottom pin diagram.

Here's how to make a bird's nest:

1. Prepare tools. Waste cartons, pens, rulers, carving knives, scissors, glue, adhesive tape, kraft paper, rivets, plastic wrap.

2. First of all, draw a simple drawing with a craftsman.

3. Prepare the carton and tools, take out the carton, and then disassemble it and lay it flat.

4. According to the appearance of the drawing, draw the various parts of the bird's nest required on the carton, and try to determine the size of the bird's nest by installing the size of the carton.

5. Then use a carving knife to scratch out the unwanted parts. At the same time, the edges that need to be folded should be set aside, remember to use a carving knife to draw a folded edge along the folded line, and it will be easier to fold when the time comes.

6. Then rivet each part with rivets, or glue it up.

7. Cover the roof, and then wrap the entire sliding section of the bird's nest with plastic wrap to prevent water leakage when it rains.

8. Then wrap another layer of kraft paper to prevent the birds from destroying the plastic wrap, and also prevent the plastic wrap from reflecting, and the birds dare not live in it. An additional layer of protection has been added.

The nest of the bird's nest is the meaning of the nest, and the bird's nest is the nest of the bird, and in layman's terms, it is the place where the bird lives.

In fact, the material of bird's nests all over the world is almost the same, nothing more than some hay, dead branches, mud, in the light rain, the loose building structure is conducive to drainage, but when the wind and rain are strong, the whole nest has to be overturned.

Tools Raw materials: newspaper, fine iron wire.

1. Divide a newspaper into 4 parts horizontally, roll it up diagonally from one side, pay attention to adjust to keep the thickness even, and the specific completion figure is as follows.

2. First use 7 to build a cross shape, and the specific completion figure is shown below.

3. Thread the center of the 7 paper rolls into the iron wire (one of them can wear half a wire), cross positioning, and start winding from the paper roll of half a wire, as shown in the figure below.

4. Alternately weave around the top and bottom, and the specific completion diagram is shown below.

5. When the bottom diameter of the container is completed, the main branch can be erected, and the specific completion figure is shown below.

6. Prepare to the appropriate length, adjust the shape of the main branch according to your own preferences, cut off the excess theme, and pay attention to the shape of the weaving should also be adjusted frequently, otherwise it will be crooked.

7. Clamp the remaining main branches one mile and one field, and the bird's nest will be completed, as shown in the specific completion diagram.

The practice and steps of handmade bird's nests, the birds have lived in a "big house", and they are too envious.

The practice of the bird's nest. Prepare tools and materials, including waste cartons, pens, rulers, knives, scissors, glue, adhesive tape, kraft paper, rivets, plastic wrap, etc. First of all, draw a simple drawing of the bird's nest, if you don't know how to draw it, you can find relevant drawings from the Internet.

According to the drawing, draw the various parts of the bird's nest needed on the carton, and we can determine the size of the bird's nest according to the size of the carton.

With a carving knife, scratch off the unwanted parts. At the same time, leave the edges that need to be folded, and remember to use a carving knife to draw a broken line along the folded edges. After the carton is cut, rivet each part with rivets, or glue it, and after confirming that it is firm, cover the roof and fix it with rivets or glue.

Wrap the outside of the nest with plastic wrap and wrap it in kraft paper, so that the nest is made in a carton.

Bird's nest

Birds build habitats for many small birds to weave. They grasp blades of grass, twigs or plant fibers with their claws, and thread needles with their nimble beaks. Nests are mostly made up of organic matter such as twigs, grass, leaves, and saliva.

Some birds build their nests in trees, others (such as vultures, eagles, and many seabirds, such as the three-toed gulls) build their nests on Iwaga Broad Reef, and some birds build their nests in the ground or in burrows.