How to change the bulb for a spherical chandelier in the bedroom?

In the house, in fact, sometimes, we often have some problems, especially when a certain electrical and equipment in the home is broken, we need to replace or repair, then some people will have such doubts, that is, how to replace the bulb in the bedroom spherical chandelier? For this problem, in my personal opinion, we only need to disassemble the damaged bulb. At this time, we need to prepare a lamp that can be replaced, let's learn about it in detail.

1 Remove the damaged bulb

We all know that in fact, some of the electric lights used in the home are indeed difficult to replace, especially when there is a problem, we don't know where to start, and the procedures in it are quite complicated. Especially for the spherical chandelier in the bedroom, if the bulb is broken, we should remove the damaged bulb and install a new bulb on it. First of all, be sure to open its lid, because every light has a lid closed, which is also a safety issue for what can be guaranteed.

2 Prepare a replacement lamp

For many of the lamps used in our families now, in fact, it has a corresponding lamp, and then the size of the lamp is also designed according to the specific size of the lamp, so when we change the bulb, we must prepare a replacement lamp.

So we should pay more attention to this aspect of the problem in our daily life, for everyone, we have a certain benefit to understand this aspect of the problem, of course, if you do not have a certain understanding in this regard, or are helpless, we can also ask the relevant repairer to repair for us, but in this process, there may be corresponding costs, so we must be prepared for the relevant thoughts, the above is my summary of some of the relevant understanding of this problem, Hope this will be useful to everyone.

How do you change the bulb for a round chandelier? This problem is very troublesome to everyone, most people seem to have no way to start, before solving this problem, we first know the specific structure of the circular chandelier, the circular chandelier is composed of: the upper wire, the gossip board, anti-inflammatory cotton, expansion bolts, hexagonal nuts, lamp holder brackets, energy-saving lamp heads, ballasts, ceiling plates, upper decorative rings, squares, center rods, lower decorative rings, the lower layer has lampshades, round covers, decorative grains, etc.

In the process of replacing the bulb, it is necessary to study the structure of the circular chandelier more carefully, so that the bulb can be better replaced. Round chandeliers are widely used in modern home life, making them have a wide variety of styles and different ways to replace bulbs, so how to change the bulb for round chandeliers? The first point of the round chandelier in the process of replacing the bulb is the removal of the lampshade, in the actual operation process, only need to gently rotate the lampshade a few times, then the chassis also rotates, when the rotation to a certain position, you will clearly see the three buckles, as long as you hold the buckle can easily remove the lampshade, so that the bulb can be replaced.

Rotate and remove it to change, and spherical chandeliers are generally rotated and fixed.

We first need to take down the chandelier, then unscrew the original bulb and replace it with a new one, so that it can be solved.

The handle of the metal on the top is pulled outward, and there are three wire circlips inside, pull out a little and take out one of them first, and then take the second one. After taking it out, replace it with a new bulb and press it back. You can replace the lamp structure according to the manual, or consult the manufacturer.

To change the lamp for the chandelier, first of all, according to the safety requirements, it must be confirmed that the power supply is in the off state, if it is a screw bulb, it is best to check whether the screw is still charged (if the switch is on the zero line, it is possible that the circuit of the lamp has been closed and the screw mouth is still powered); Then unscrew the damaged bulb on the lamp head with appropriate force, and it is best to check whether the screw part and the contact point between the screw head are normal, and then replace the bulb with the same power and voltage level as the screw mouth specification that meets the requirements of use; If it is an socket bulb, it should also be turned off first, the broken bulb on the lamp head should be pushed slightly inward, and then twisted in the counterclockwise direction, the lamp can be removed, before installing a new bulb, it is also best to check whether the condition of the lamp head is normal, and then the normal or new bulb that meets the requirements is installed on the lamp head in the reverse order when dismantling. It should be noted that in order to prevent the glass of the bulb from breaking, it is best to wear gloves when making it to have a certain protective effect.

LED spherical lamps are new energy-saving lamps that replace traditional incandescent bulbs. Traditional incandescent tungsten lamps have high energy consumption and short life, and have been gradually banned by countries in the context of global resource constraints. The light bulb is made according to the principle of the thermal effect of electric current, which refers to the lighting source that emits light and heat through electrical energy, invented by Henri Goebbels Edison actually found the right material, that is, the invention of the practical incandescent lamp, and the light bulb appeared as early as 1854.

"Lighting appliances" are produced with the continuous development of human civilization, and the most common function of light bulbs is lighting. With the development of society, the use of light bulbs also plays a different role, at first it may be to provide convenience for production and life, but with the progress of society, there have been obvious changes in the use of light bulbs, and there are functional lamps for different purposes such as "automobiles, landscaping, and decoration".

Lamps and lanterns are indispensable electrical products in life, not only bring light to life, but also can play a better decorative effect, but the bulb in the process of use, it is inevitable that there will be failures, please ask someone to repair, it will cost a lot of money, but if you buy your own bulb replacement, you can save a cost. So, how do you change the bulb for a suspended ceiling light? What are some tips for buying light bulbs?

Let's take a brief look at it.

1. How to change the bulb for the ceiling lamp.

Disconnect the power supply and buy a new bulb with the right model; Then remove the lamp cover; Finally, replace the old bulb with a new bulb and close the lid. Note that when replacing the chandelier, a stable ladder must be used and someone needs to be supervised to avoid the risk of falling.

2. What are the tips for buying light bulbs.

1. Look at the packaging brand: there are many types of bulbs on the market, consumers must choose qualified brand products when choosing, in order to ensure the quality of the product, it is recommended to choose a well-known brand, such as Opple lighting, NVC lighting, Sanxiong Aurora and so on.

2. Look at the performance of the bulb: when buying the bulb, you must check the use status of the bulb, if the merchant has a voltage regulator, first adjust the voltage regulator to the 150w gear, and then turn on the lamp to see if it can be ignited at one time, pay attention to the case of human body induction, the start time is shorter.

3. Look at the state after work: after testing the bulb, you can look at the temperature of the bulb, the lower the temperature of the bulb, the better the quality of the bulb, and at the same time, it should be noted that after the bulb is tested, there will be a black line at the root of the lamp, and the shorter the black line, the better.

4. Look at the interference: According to Qeeka Home experts, electromagnetic compatibility is an item that must pass the test for every electrical equipment, because the testing process of the project is very complicated, so consumers only need to pay attention to whether they have the mark of passing the test when purchasing light bulbs.

Summary: The above tips on how to change bulbs for ceiling lamps and what are the tips for buying bulbs are introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.

Summary. Dear, hello, the way to change the bulb of the ceiling lamp is to remove the lamp cover; Finally, replace the old bulb with a new bulb and close the lid. Dear, I hope mine can help you <>

How to change the bulb of ceiling lamp?

Dear, hello, the way to change the bulb of the ceiling lamp is to remove the lamp cover; Finally, replace the old bulb with a new bulb and close the lid. Dear, I hope mine can help you <>

Kiss, knowledge expansion The inch tablet screen is large, the resolution is high, the keyboard area is large when operating, it is convenient to type, and it is comfortable to watch movies. The 7-inch tablet is lightweight, generally only half the weight of the 10-inch, and most of them are 300 400 grams, which is more convenient to carry. 2. Look at the touch screen

The screen of a tablet is divided into a resistive screen and a capacitive screen. The resistive screen is low, easy to use, any contact can be used, but it only supports a single touch, too hard or using a sharp tool may scratch the screen, and the low-end tablet generally uses a resistive screen. The capacitive screen touch sensitivity is high, can achieve multi-touch, and the system can react according to the movements of the fingers, such as zooming in and out when browsing**, zooming in and out when browsing the web, etc.

3. Look at the operating system: The tablet operating system is basically divided into three parts: Windows, Android and iOS. Windows tablets represent the highest grade of tablets, excelling in configuration, performance, and compatibility.

The biggest advantage of the Android system is that the resources ** are all free, which can save a lot of money compared to Apple, but many of its software are not as fine as Apple. 4. Look at the network configuration: At present, the network that can be used by the tablet includes 3G and wifi, if you need to access the Internet anytime and anywhere, you can buy the 3G version, but it will be about 300 yuan more expensive than the wifi version.

Personally, I recommend choosing WiFi, one is because the coverage of China's 3G network is not enough, and the characteristics of 3G Internet access anytime and anywhere can be.

Pro, knowledge expansion 1, before changing the ceiling lamp, you need to turn off the main valve to ensure safety; 2. Use props to cut out a corner of the aluminum buckle plate, and then slowly remove it; 3. Remove the lampshade of the ceiling lamp and replace the lamp of the same model; 4. Install the lampshade and aluminum buckle plate in order, and fix them firmly.

It's easier for two people.

One person holds one person and turns the lampshade.

Contact the manufacturer, or directly find the hardware store staff to deal with it.

Do-it-yourself plasticity is not very reliable.

If it breaks, the gain outweighs the loss.

Disconnect the power supply, use a multimeter to detect: LED lamp beads, integrated circuit chips, semiconductor chips, etc., determine which part is broken, buy the same model and replace it. If you have two identical LED lights in your home, you can check them by replacing them.

2. Pull the ceiling lamp out a little more, you will see that there is also a device with a spring on the symmetrical surface, at this time, pinch these two devices tightly to easily remove the broken ceiling lamp bulb.

3. Slowly unplug the plug, replace it with a new ceiling light bulb, and then pinch the two spring devices with one hand.

4. Pinch the two spring devices tightly, and slowly put the ceiling lamp in, taking care not to clip it.

Go to ** ask the store, it should be able to solve.