-
Anonymous users2024-02-12Prepare materials: long strips of wood, ruler, pen, saw, sandpaper, glue gun, transparent plastic board, iron mesh, wire, scissors, wooden sticks.
1. Take two pieces of wood, measure the center point of the chips with a ruler, and then mark them with a pen.
2. Then use a saw to cut the wood chips in half along the markers.
3. After sawing, sand the wood chips with sandpaper.
4. Use 8 other unsawed wood chips to glue into 4 triangles.
<>7. Take out another triangle and stick it to the other end of the wood chip, and then glue a sawn wood chip next to it.
<>9. The other end of the rectangle is glued in the same way to make the main body of the bird cage.
10. Put a transparent plastic plate at the bottom and top of the rectangle and glue it firmly with a glue gun.
<>12. Put iron nets around the four bird cages.
13. After the iron net is enclosed, it is fixed with wood chips.
14. On one side of the birdcage, glue two pieces of wood in the middle.
<>16. Drill two holes on both sides of the wooden board and the door, and then fix them with iron wire.
17. Make two rings with iron wire, then install the door, and insert a small wooden stick as a lock.
18. Finally, put two long wooden sticks in the finished birdcage.
19. Done.
-
Anonymous users2024-02-11Japanese craftsmen make birdcages out of bamboo, and each step is extremely meticulous What do you think?
-
Anonymous users2024-02-10Tools Materials: scissors, alcohol glue, pencils, white paper, sewing kits, rice beads.
Method: 1. We need to prepare some beautiful woven cloth, a pair of scissors, alcohol glue, pencils, white paper, sewing kits, and rice beads for backup.
2. First of all, we need to draw a pattern on the white paper, which is the shape of the birdcage and the shape of the bird. The bird's wings should also be drawn separately in order to have a three-dimensional effect. Then use scissors to cut them along the drawn lines and put them together to see if they look good.
3. Place the cut pattern on the prepared non-woven cloth and draw a line along the edge with a pencil. We should draw every part well, such as the small wings, and we should not forget it.
4. Then we use scissors to cut out the unneeded parts of the non-woven fabric along the drawn line. The non-woven fabric we use is a very thick one, and it is too soft to stand upright.
5. Then we make the bird in the cage first, and first coat the bird's wings evenly with alcohol glue.
6. Glue the glued side to the bird's body.
7. We also apply glue to the other wing of the bird and stick it to the other side of the bird's body. Don't do it backwards, or you won't be able to stick it. Then we used the black millet beads as the bird's eyes, and glued the rice beads to the sides of the bird's head with alcohol glue.
8. After the birds are ready, we overlap the two layers of the birdcage and find their midline. We stitched the two layers of midline together with threads of a similar color.
9. Then, we turn the non-woven fabric to the side and sew it at the middle line, so that the two layers of fabric weaving will be separated. It looks more three-dimensional.
10. Then sew the finished bird into the bird cage with thread, and let it hang in the bird cage just right.
11. Sew the upper end of the birdcage with a thread to make a rope so that we can hang it up.
12. The picture below is a rendering of the finished bird cage and birds.
-
Anonymous users2024-02-09Material tools required: pencil, cardboard, hole punch, disposable paper cups, scissors.
1. Use scissors to cut the disposable paper cup out of the shape of the fence.
2. Use a hole punch to punch holes at the top of the paper strip.
3. Use a ribbon to pierce the hole at the top.
Get up and fasten.
4. Glue the cut bottom firmly with tape.
5. Draw the shape of a bird on cardboard.
6. Cut it out and put it in a birdcage.
7. Such a good-looking birdcage is ready.
-
Anonymous users2024-02-08The method of making a bird cage is as follows:
1. The material of the birdcage can be made of stainless steel or bamboo with toughness, and it is not easy to bend, if it is made of bamboo, the equipment to be prepared is bamboo, small saw blades, steel ring molds, knives, wires, etc.
2. First, use knives and saw blades to make bamboo into strips, which need to be thick and thin, and then dig holes according to the production plan of the bird cage to facilitate the fixation of the joints.
3. The chassis of the birdcage can be hollowed out, or a solid plate can be made, the following is hollowed out as an example, which is relatively simple, and then the cage body is made, and the coarse liquid bamboo strips prepared by the alcohol lamp are made into a circle shape.
4. Fix at each joint of each next step.
6. In the process of making the cage body, leave a movable surface on one side to facilitate feeding and water for the birds.
7. The overall shape of the birdcage is formed, and then a hook can be installed.
8. Then refine the birdcage and install the hook, so that the birdcage is completed, and the birdcage should be made slowly and carefully in order to make a beautiful birdcage.
-
Anonymous users2024-02-07Prepare the materials. Plastic bottles, wire hangers, fine wires, small wooden strips, knives, bird food.
1. Cut the wire hanger and drag it into a straight line.
2. Bend the wire hanger into a straight line at 90 degrees according to the width of the plastic bottle.
3. Wrap the wire hanger around any stick 360 degrees.
4. Break the open end of the wire hanger with pliers, and go to the top according to the width of the plastic bottle.
5. According to the length of the bottle, bend the long wire inward by 90 degrees.
6. Remove the excess parts of the wire hanger that are bent back.
7. Put the made wire on the plastic bottle, open two holes in the specified position, and fix it with screws.
8. Make a few more holes at the end and bottom of the plastic bottle according to the position of the wire.
9. Open the tail of the plastic bottle in the shape of a trapezoid. The position of the black line in the image below.
10. Tie the bottom of the cut plastic bottle with a rope to one end of the wire opening and closing.
11. Fix the upper end of the wire and the plastic bottle with screws.
12. Open the mouth of the plastic bottle halfway with a knife to jam the wire.
13. Stick a small wooden strip about the same width as the plastic bottle on the underside of the plastic bottle.
14. Take a thinner wire to hook the wire hanger above the plastic bottle.
15. Put in the bird trap food, when the bird enters, pull the thinner wire to close the bird trap so that the bird trap is ready.
The inheritance craftsmen in the countryside make large "bird cages" by hand, and the craftsmanship is a must.
Here's how to make homemade double skin milk:Step 1: Put the milk into a bowl. >>>More
The original text of the pinyin version of the ancient poems seen in the book of Zhou Yeshu is as follows: >>>More
How to make dried flowers?
Dried flowers are a general term for the flowers, leaves, and fruits of flowers that have been dried. It not only has the charm of truth, goodness and beauty given by nature to flowers, but also has the characteristics of "artificial flowers" that are long-lasting and unwithered, natural and simple, and lovely. There are many methods of drying flowers, mainly including natural drying method, room temperature pressing method, sand (borax) drying method, desiccant embedding method, glycerin drying method, microwave oven drying method, etc. >>>More
When it comes to sweet rice wine, it has to be said that sweet rice wine has a wide range of suitability and can be drunk all year round. The main raw materials of sweet rice wine are rice and glutinous rice, which are fermented with natural microbial pure koji, and contain more than 40% glucose, rich vitamins, amino acids and other nutrients. The weather is gradually getting cooler, so I will share with you how to make sweet rice wine and how to make your own sweet rice wine. >>>More