Wood paint should be repaired in time, how to repair wood paint?

Woodworking paint is divided into ordinary paint and water-based paint, carefully polish the cracks, clean the sanded parts, and then brush the same color paint with special repair wax, and apply it carefully. Mixed oil If the paint surface has been severely cracked, the cracked paint surface needs to be carefully removed, putty applied, polished and sprayed. If there are only slight cracks in the paint surface, sanding it directly and spraying it.

Furniture renovation can be done with large if our furniture is very expensive and if we want to repair the paint ourselves after the paint has come off, we must go through a certain formal procedure that is the choice of paint. Furniture paints are generally divided into oil-based paints and water-based paints.

Under normal circumstances, oil-based paints are colored. The design of water-based paint is to ensure the original color of solid wood furniture, which means that water-based wood paint is transparent. If our furniture is painted, I think it should be oil-based paint, because water-based paint is not easy to find, so we only need to buy selectively according to the color of the paint.

Polishing and refurbishing furniture, just like refurbishing a car. That is to say, after the furniture is painted, all the places around the furniture should be sanded clean, so that it can be as smooth as possible, which is convenient for us to paint. When polishing, be sure to pay attention.

If our wooden furniture is pure solid wood, then we should polish it in the direction of the grain of the solid wood, first up and then down, first outside and then inside.

The sandpaper should not be too big and not too small, as long as it is suitable according to the size of our hands, and if the paint comes off the edges and corners of the furniture, we should be more careful when polishing. When the paint is sanded smooth, the pigment is mixed. The paint mix is very special.

We must pay attention to the need for touch-ups. The density of household materials, if it is pure solid wood furniture, and the density is relatively high, then we have to adjust the thickness when painting. If the density is relatively low, then we must adjust it when painting.

This is mainly done by maintaining the overlap between the lacquer and its own wood through density. If the adjustment is not in place, it will be easy to be seen after the painting is finished, which will affect the overall appearance of the home. When drawing, I recommend using smaller brushes, as they are relatively easy to control and work perfectly with details, but they are especially time-consuming.

When drawing, you must pay attention to the speed of drawing, not too fast and not too slow. We have to keep painting at a constant speed because too fast will cause the painting to be uneven, and too slow will definitely lead to the accumulation of paintings in some places.

You should choose some good-looking furniture, and you should also cover the original furniture directly, so that it will not fall off, and it is particularly beautiful, and you should choose some sandpaper.

There are some special paints that can be used to repair the wood, and after applying it to the sun, it can remove the odor in about 5 days, and the effect is exactly the same as the original.

We can sand the damaged wood paint and recoat it so that it can be repaired.

You can buy some related materials, in fact, you should buy some of the same paint, and you have to buy a model, you can have a good repair.

1. First pour 502 glue on the place that needs to be filled. Fill the patch with broken wood chips, pour 502 glue, and wait for it to dry. Then use a file to trim the protrusion or excess part of the finger skin to restore it to its original shape.

Pat the virtual sandpaper sandpaper, repeatedly pour 502 glue, and cooperate with the shovel or grinding to make the filling part absolutely flat and smooth.

2. If you can't accurately polish and flat, you can wrap the blade plane with sandpaper, and then polish the position to be filled. Repeat until the ignition is completely leveled.

1. Prepare the wooden products to be repaired. Use sandpaper to polish the surface of the wood (the first sanding is about 240 sandpaper for sanding) and treat the surface.

2. After sanding, clean up the dust on the surface of the board, and fill the putty with a gray knife or hard card to the damaged parts of the board, such as depressions and potholes.

3. Fill the putty slightly higher than the surface of the wood to prevent about 2 hours (the drying time is determined by the putty and temperature) and wait for the surface to dry.

4. After drying, polish the putty with sandpaper to make its surface smooth and flat, and then clean the dust on the surface of the board with a rag.

5. If the board does not need to be closed, if you want to retain the natural concave and convex touch of the board, you can directly apply wood wax oil or wood paint; If necessary, it is necessary to polish the surface to make it smooth and flat, and apply putty to the surface of the board.

6. After the putty is dry, polish the surface of the wood and clean up the dust.

7. Wood wax oil or wood paint on the surface of the wood, wait for drying, and the construction is completed.

1. If the furniture paint film is burned by cigarette butts or foreign fires that have not been extinguished, and the wood under the unburned paint film is not burned, you can use a small piece of fine-grained hard cloth to wrap a chopstick head, gently wipe the burning traces, and then, apply a thin layer of wax liquid, and the scorch marks can be removed.

2. If the furniture is not vigilant against scratches, but does not touch the wood under the paint film, you can use a cotton cloth dipped in a little molten wax and apply it to the paint film abrasion to surround the scars.

3. The appearance of wooden furniture is directly arranged to hold hot water utensils, which will leave a thick white round scar on the wooden furniture. As usual, it will be removed as long as it is wiped in real time. However, if the burn marks are too deep, you should gently rub them on it with ordinary iodine wine, or apply some petroleum jelly to the burns, and after two days, wipe them with a soft cloth to remove the burns.

4. You can also use a soft cloth dipped in alcohol, perfume or fire oil, wipe hard, and the white burns will also be removed.