What position in the lighting factory is the best way to learn about safety regulations and accessor

Personally, I think that designing in a lighting factory is the best way to understand the knowledge of safety regulations and accessories.

But there is a certain threshold for designing in the factory, that is, you must at least know how to design, understand the general structure of the lamp and the common accessories of the lamp, of course, some factory design work will involve safety regulations.

You can go to the Internet to find information about safety regulations, and you can learn while looking for them; If someone takes you to take you to about a month to deal with the knowledge of accessories, it takes about 2 months to learn lighting design before you can get on the job (if you know graphic design software before, you can deal with the work in half a month).

Personally, I think that you should first examine yourself according to the requirements, make up for what you lack, and then find a good entry point and do a good job of your own time planning, so that you can achieve your ideals or goals.

Of course, your goal is to learn something real. No matter what skills you want to learn, you have to experience them in practical work to be useful, and the job you find is a process of your experience. Here, I would like to remind you once again not to forget about your goals in the process.

The above is for reference!

At the beginning of the safety regulations, it is still difficult to understand if no one brings them.

Therefore, if you want to learn, you must choose a position that can reach people who understand safety regulations, especially those in large laboratories. Feel free to ask any questions you have in the future. However, I think it is better to learn safety regulations than to engage in development, unless you can enter a large company like ultuv in the future, the salary is relatively low, and the only advantage is that there is basically no need to work overtime to engage in safety regulations in the factory.

Job Responsibilities:

1. Undertake product safety design work and formulate safety design plans;

2. Responsible for safety testing, preparing safety test plans and reports;

3. Responsible for proposing improvement plans for the problems found in the test;

4. Responsible for the organization of the whole process of safety certification, so that the products can obtain safety certification;

5. Put forward measures to deal with the safety problems that occur in the product life cycle.

Please refer to Huawei's recruitment requirements.

Job Responsibilities:1. Undertake product safety design work and formulate safety design plans;

2. Responsible for safety testing, preparing safety test plans and reports;

3.Responsible for proposing improvement plans for the problems found in the test.

4.Responsible for the organization of the whole process of safety certification, so that the products can obtain safety certification.

5.Propose measures to deal with safety problems that occur in the product life cycle.

Job Requirements: 1. Professional knowledge.

1. Have basic knowledge of hardware design and master the basic principles of product safety;

2. Proficient in communication and IT product safety standards;

3. Proficient in safety testing methods, more than two years of work experience in safety design and review;

4. Proficient in safety certification skills, familiar with international certification bodies, certification systems, and certification processes. Proficient in handling technical issues in certification testing. More than 2 years of work experience in safety certification.

2. Academic qualifications and other requirements.

1. Graduated from electronic and electrical engineering disciplines, bachelor degree or above;

2. CET-4 or above in English, proficient in reading English materials, proficient in English writing and oral communication;

3. Love safety work and be willing to engage in safety work for a long time;

4. Have tenacity and perseverance, not afraid of difficulties, have a good sense of teamwork, communication and coordination skills.

Well, the one on the first floor is too good.

A clerk is an office worker. What you can learn by doing chores is what you can learn by clerks.

I was applying for the position of a clerk, telling you what I do, WPS Office office software application typesetting, reception, document printing, scanning, fax, collection and distribution of office supplies (see what there is no purchase to buy), keep a running account (sales account, reserve, inventory, product inventory, accessories and parts account), invoicing, tax filing, office back, cleaning, repair printer (change ink), repair fax machine, to put it bluntly, I don't fucking know what I do, I feel that I am omnipotent, assistant, clerk, finance, sales, cleaning, and later add a purchase!

However, if you want to work in the office, there must be a stage, although the clerk has a low position and does not develop much, but you can learn a lot! Come a little bit!

Express normal customs declaration, only need to provide the name, weight, value, volume, number of pieces, if necessary, add Q2217741297

"Safety Technical Code for Fastener-type Steel Pipe Scaffolding for Building Construction" JGJ 130-2011

3 Components.

3 1 Steel Pipe.

3 1 1 The scaffolding steel pipe shall adopt the Q235 ordinary steel pipe specified in the current national standard "longitudinal welded steel pipe" GB T 12793 or "welded steel pipe for low-pressure fluid transportation" GB T 3091, and the steel quality of the steel pipe shall comply with the provisions of the Q235 grade steel in the current national standard "Carbon Structural Steel" GB T 700.

3 1 2 scaffolding steel pipe should be used steel pipe. The maximum mass of each steel pipe should not be greater than.

3 2 Fasteners.

3 2 1 fasteners should be made of malleable cast iron or cast steel, and their quality and performance should meet the provisions of the current national standard "Steel Pipe Scaffolding Fasteners" GB 15831.

3 2 2 The fastener shall not be damaged when the tightening torque of the bolt reaches 65Nm.

3 3 Scaffolding.

3 3 1 Scaffolding board can be made of steel, wood and bamboo materials, and the quality of a single scaffold board should not be greater than 30kg.

3 3 2 The material of the stamping steel scaffold should symbolize the provisions of the Q235 grade steel in the current national standard "Carbon Structural Steel" GB T 700.

3 3 3 The material of wood scaffold shall comply with the provisions of the current national standard "Code for Design of Wood Structures" GB50005). The thickness of the scaffold board should not be less than 50mm, and two galvanized steel wire hoops with a diameter of not less than 4mm should be set at both ends.

3 3 4 Bamboo scaffold board should be made of bamboo skewer board or bamboo fence board; The bamboo skewer scaffold board shall comply with the relevant provisions of the current industry standard "Safety Technical Code for Building Construction Scaffolding" JGJ464.

3 4 Adjustable braces.

3 4 1 The outer diameter of the adjustable brace screw shall not be less than 36mm, and the smuggling and pitch shall comply with the provisions of the current national standard "Trapezoidal Thread Part 3: Basic Size" GB.

3 4 2 The welding of the screw rod of the adjustable brace and the bracket supporting plate should be firm, and the height of the weld shall not be less than 6mm; The screwing length of the adjustable brace screw and the nut shall not be less than 5 buckles, and the thickness of the nut shall not be less than 30mm.

3. The design value of the compressive bearing capacity of the adjustable support should not be less than 40kN, and the thickness of the support plate should not be less than 5mm.

3 5 Cantilever scaffolding with section steel.

3 5 1 The material of section steel used for cantilever scaffolding shall comply with the provisions of the current national standard "Carbon Structural Steel" GB T700 or "Low Alloy High Strength Structural Steel" GB T1591.

3 5 2 The material of the U-shaped steel bar tension ring or anchor bolt used to fix the section steel cantilever beam shall comply with the provisions of the HPB235 grade steel bar in the current national standard "Steel for Reinforced Concrete Part 1: Hot Rolled Round Steel Bar".

In the Zhuobo talent network, it was previously classified in R&D, but now it has been changed to quality.

Safety certification is a separate piece of certification, which is different from other professions.

CE certification is a mandatory certification of the European Union, if it is a self-declaration method or a domestic third-party testing agency GS mark: it is a kind of safety certification within Germany, and the scope of application is not wide. So there are 27 CE in the EU.

You select the test, and the certification column will do.

EMC is getting more and more attention to this thing now!

General workers in mobile phone accessories factories, there are a lot of programs, what position to assign, the uncertainty is very high, there are surface treatment plants, basically standing, there are post-assembly (assembly line doing), testing (standing), assembly (doing), I hope the work cube work network can help you.