Running and running without deceleration method is as the title Thank you

Updated on educate 2024-06-15
10 answers
  1. Anonymous users2024-02-12

    If you really spray, you won't slow down.

  2. Anonymous users2024-02-11

    Pick a circular track and practice it slowly The general technique is: take the left corner as an example, shift then shift and then repeat.

  3. Anonymous users2024-02-10

    Accelerate fast to the corner, drift with inertia to drift, then accelerate slightly, and then accelerate again... You have to have a lot of curves...

  4. Anonymous users2024-02-09

    In fact, if you buy a motorcycle, it's very easy to drive, not to go to K1, don't ask too much, you will play more naturally, I didn't lie to you.

    I'm an electric 1.

  5. Anonymous users2024-02-08

    When it was even floating, it was too long to be loose.

  6. Anonymous users2024-02-07

    Your skills are not good yet, you have to practice.

  7. Anonymous users2024-02-06

    C-type continuous spray (transverse continuous spray): This continuous spray is the easiest to practice C-type continuous spray fingering: 1

    shift (first drift) 2Pull back the head of the car ) step must be fast! 3.

    shift ( second drift attention!) Here is not pressed ) 4.+ The first time you breathe fire, you must press first and then press ) 5.

    shift 6+ The second Spitfire, must be pressed first and then pressed ) 7.The third Spitfire ) D type continuous spray (diagonal continuous spray):

    Fingering of D-style spraying: 1shift (first drift) 2

    Pull back the head of the car ) step must be fast! 3.shift ( second drift attention!)

    Here is not pressed ) 4.For the first time to breathe fire, you must press the ) at the same time. 5.shift 6

    For the second time you breathe fire, you must press the ) at the same time. 7.Third Spitfire )

  8. Anonymous users2024-02-05

    Drift: Shift

    (pull head) + shift (here is the first drift of the jet and shift is the entry of the second drift).

    Break: Shift

    +shift (at the end of the first drift, shift a tap) (jet).

    Spray: Shift

    shift (the first drift immediately enters the second drift, note: the drift here cannot be pointed).

    (Due to the first drift, here is the first drift of the jet, and the head of the cart is pulled) +shift

    (Repeating these two steps is a continuous spray).

  9. Anonymous users2024-02-04

    C-type continuous spray (transverse continuous spray): This continuous spray is the easiest to practice C-type continuous spray fingering: 1

    shift (first drift) 2Pull back the head of the car ) step must be fast! 3.

    shift ( second drift attention!) Here is not pressed ) 4.+ The first time you breathe fire, you must press first and then press ) 5.

    shift 6+ The second Spitfire, must be pressed first and then pressed ) 7.The third Spitfire ) D type continuous spray (diagonal continuous spray):

    Fingering of D-style spraying: 1shift (first drift) 2

    Pull back the head of the car ) step must be fast! 3.shift ( second drift attention!)

    Here is not pressed ) 4.For the first time to breathe fire, you must press the ) at the same time. 5.shift 6

    For the second time you breathe fire, you must press the ) at the same time. 7.Third Spitfire )

  10. Anonymous users2024-02-03

    In order to increase the speed of continuous spraying, we will deal with the key to the problem - small drift, and deal with the small drift in the original double spray: shift, and now it will be modified to shift This is still small drift! It's just that this kind of small drift is pressed before the time, so it will come faster than the original kind of small drift, the loss of speed will be reduced, and the speed of continuous spraying will be significantly increased.

    In this way, there is a new even spray fingering, in fact, it is not new, I guess everyone has seen it, that is: shift shift shift now comes to the most critical part of the problem, that is, how to practice fingering. If you don't listen carefully to what I explain to you, you won't know much about this kind of continuous spray all at once, and you will even be confused, it doesn't matter, I was like this at the beginning, hehehe.

    It's not difficult to learn the truth, and it's estimated that there will still be some people who don't understand this kind of fingering at this time, so I'll explain it to you very carefully, everyone should remember! First of all: shift, this is the first drift, to optimize the drift, first hit the direction and then drift; Then release Shift and continue to press that is:

    , pull back the body, end the first drift; Then continue to press , release, and press shift to form a new drift with :shift; Then release all the keys, and then quickly press to form a spitfire (here to add, in the continuous spray can be pressed together, you can also press first and then press , which is respectively the type of continuous spray and the type of continuous spray, by controlling the length of time and the speed to control the length of the arc and the curvature, which belongs to the more delicate technology of the master); Then continue to press , release, and press shift to form a small drift; Then release it all and press Spitfire; Then continue to press , send away, press shift, and form:

    shift; Then send it all away, press Spitfire;; Finally, Spitfire. Well, this is theory plus practice, everyone has to work hard to practice, after practice, everyone will find that this kind of continuous spray is only loosened when the fire is breathed, and the rest of the time is pressed, obviously the speed will increase a lot.

    I wrote such a lot of things, don't think it's good for my mother-in-law, hehehe.

Related questions
15 answers2024-06-15

S squirt? Is it a shift key spray? Is it a break-drift? Release the drift key during the drift process, then press back again, and the rhythm is mastered by yourself! Don't say much, it's useless to say it!

17 answers2024-06-15

It depends on the size of the curve. Spray 2-3 times for small ones, and 3-4 times for larger ones. If you spray too much, it's not good, and the speed will drop more. If you are satisfied with mine, please choose my answer as, thank you!

5 answers2024-06-15

The tiredness of work is often caused by unfamiliarity and inability to practice makes perfect, the current situation is that you have to continue to work hard, don't think about other things when you work, work wholeheartedly, and work will of course be tired after distractions. Stress reduction is actually nothing, just don't stress yourself, naturally you don't need to decompress, right?

12 answers2024-06-15

Classification of common welding methods.

1. Fusion welding. The method of partially heating two welded workpieces until melting to overcome the obstacle of bonding between solids, and then cooling and crystallizing into a single joint is called fusion welding. >>>More

3 answers2024-06-15

It's best to form your own learning method Ask more questions to teachers and classmates Don't save If you want to improve your grades, you must work hard and work hard Compared to you doing a lot of questions meaninglessly, dozens of teachers and classmates are the most concise way Although it is more difficult to speak for the first time and afraid of others laughing at it, but you ask again and again It will be good to the fourth or fifth time (and it is a great benefit to ask the teacher The teacher will not only help you solve the questions you ask, but more importantly, he will call you a lot of knowledge points that are often found in other exams, which is very important)