Enter the router settings and ask for a password???

How to set the password for the router administrator:

Log in to the router management interface.

The username and password that have not been set (both initial and reset) are: admin, and you can log in after entering.

Go to the Administrator Account Settings page.

Click "Maintenance" - > Manage & Settings" in turn, and you will see the area of administrator account settings.

Different routers may have different ways of getting in, but they are similar.

Here's how to change your wireless router password:

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the router settings interface, click System Tools on the left and click Change Administrator Password.

5. Click on the wireless settings on the left, select the wireless security settings, and change the wifi password.

6. After changing the password, click Save to restart the router.

Wireless routers have to set passwords, although the factory will bring a password, but this password is normal and troublesome and not easy to remember, and we want to change the settings regularly, today I will share with you how to set the password of the wireless router, I hope it will help you.

Tools Raw materialsWireless routers.

Computer. Step MethodMake sure that the Wi-Fi network is connected, which can be seen in the status bar.

You can enter the router settings page.

There will be a login prompt before entering,The normal default is:admin,The password is also set in the wireless router of admin piggy,"Wireless settings"Wireless security settings"。 Some routers will have security settings in them.

Go into the wireless security settings, except for not setting a password'In addition to the options, there are 3 encryption methods:

WPA-PSK WPA2-PSK - This mode is used by general users, which is relatively secure and can prevent attacks by general network stealing software.

wpa/wpa2wep

There are two passwords in the router, one is the wireless password and the other is the login password, and each introduces how to set it up

1. Set the router login password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. The option to change the login password is generally in the system tools.

3. On the new page, fill in the username and password you want to change. The premise is that you know the correct original username and original user password. Once you're done modifying, save it.

2. Set the wireless connection password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

How to set a password for a newly bought wireless router? Wireless router password setting tutorial.

Log back in to the router and set it up

Wired connections don't require a password.

The router is connected to a wireless router.

There are two ways to set up the second router (provided that the first router is already set up):

The first method is dynamic IP mode (the first route is the primary route, and the second route is the slave route).

1. Plug in the router and do not connect the LAN port of the main router first, and reset the slave router (restore the factory);

2. Connect the computer to either LAN from the router

to enter the settings page;

3. Follow dynamic i

p mode setting;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, put the main route to LAN

The network cable that comes out of the port is connected to the WAN port from the router. Rent a calendar.

The second method: wireless AP

Manner. 1. Connect the computer to the LAN port of the router first, and change the IP address of the slave router. For example most router addresses are, we just want to take the IP address from the router.

Instead, it is sufficient; 2. Turn off the DHCP function from the router in the settings;

3. Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.