How do I get into the router and set it up?

After such a setting, you can use a browser to log in to the router settings interface, and the browser enters: or The default account password is probably admin (you can view the manual).

A simple setup with ADSL is fine, and there will be instructions in the manual!

I don't know what brand the router is.,Upstairs is talking about the general TP-Link or Onda router settings.,There are other D-Link ones.,The input gateway is not that.,But,The username and password are the same admin,In addition, there is an alpha router and so on.,The specific settings can be operated according to the manual.,You can also find it on the official ** of the product。

After entering, if you use the router to dial up the account password at the WAN port, you can connect it again, how to enter the router, the router is written, generally or.

Here's how:

1.Start by finding and double-clicking on your desktop to open the browser.

<>3.Once inside, enter the appropriate password (which can be found on the back of the router) and click "Sign In".

4.Once you have logged in, find and click on "Setup Wizard" on the left side of the interface.

5.Click "Next".

6.Then choose according to your personal situation in the 3 Internet access methods provided (under normal circumstances, if you dial up at home, choose "PPPoe", and the dynamic IP can be plugged into the computer directly to access the Internet, and the static IP is generally a dedicated line, like a community, a dormitory or something), click "Next".

7.If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password (which will be told to you when you open broadband).

8.Once completed, click Next.

9.Then the next step is to enter the wireless settings, you can see the wireless status (set to on) channel (set to auto), mode (usually choose 11BGN), security options (choose WPA-PSK WPA2-PSK, so safe, so as not to easily let others crack and rub the network), SSID (is the name of wifi, you can set it yourself).

10.Click Next.

11.Click "Done" and you're done.

All you need is your phone to do it.

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Hello, please wait for me for two minutes.

Enter your password to enter the page and click on Common Settings. 3.You can set the router name, password, etc. in the WiFi settings, and click Save when you are done.

4.Switch to Internet settings, you can set the Internet settings, WAN port rate, and click Save when you are done. 5.

Switch to Security Center, change the management password, and click Save when you're done. 6.Switch to LAN settings, you can set the LAN IP address, and click Save when you're done.

7.Switch to system state, factory reset, backup, etc.

Go to the Router Setup Wizard method:

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Click the setup wizard in the upper left corner of the page to enter the page.

Set up the router, connect the two computers with the router and use IE to enter, enter **Yes. Generally, the username and password of the router are admin. Go to the setup wizard and set a dial-up username with the account number and original password generated by the event viewer.

In it, it is set to automatically dial the number when it is turned on and disconnected.

The third step is to set the IP. Open Network Neighbors View Network Connections Local Connection Properties Internet Protocol Properties Automatically Get IP, DNS Address Option Select OK.

Ok, what's the question hi

Generally speaking, the routing address is or, of course, you also need to know the password to go in and set it, since you ask so much, you are not a network administrator, right, if you have any questions, just discuss with him.

1.To make sure that the network address set by the login router is matched to your own model, the settings of each router are different, and then after your computer is connected to the network generated by the router, enter the default password to log in.

2.My interface is the network status on the upper left, and the settings function menu on the bottom.

3.Click the router settings command below to set the current network, such as network name, password and other information.

Oh this is very easy to do, just enter the address of the router in the address bar of the browser, for example, enter the routing address in the browser address and press enter to see the routing interface. There are many routing brands on the market now, and you can route the login address according to your own routing brand. In addition, the nameplate of the general router will indicate the address of the router and the default login name and password, just look at the nameplate of the router!

If you forget the router set password, then press the reset button of the router for 30 seconds, and when the router is reset, you can log in with the factory password!

Wireless routers need to be set up according to the Internet environment before they can be used.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Follow the router's instructions step by step.

Specifically, enter it in the address bar or this is indicated at the bottom of the router.

Both the login route and the initial password are admin, which can be changed.

If you're using ADSL, then choose the option of dynamic IP, and if it's a fixed IP, choose static IP.

Then you can follow the prompts step by step. You can set the SSID name and password, and you can change the router login name and password.

First, first you need to connect your router and computer correctly, see the picture below:

2. Then open your browser and enter your router's IP address in the browser, which is usually behind your router).

3. After entering, the router login interface will pop up, and there will be an account number and password behind the router.

Telecom and routing are not conflicting, you connect the cat to the WAN port of the route, the computer is connected to the other ports of the route, and then enter the route on the web page to set up the broadband account on the line, if you can't get in, restore the route to the factory settings and then enter.

Look at the back of the router with address, username, password and other information! Connect the computer and the router with a network cable, find any interface that starts with lan1 --- on the router side, and then enter the address of the router's management page in the browser!

Open your browser and type in **.

Then the enter key, it will ask you to enter the password and account number, the initial password account is admin (lowercase) and then you can set up your router.

There is an IP address on the back of the router that the computer is connected to and typing in the browser is usually similar to this IP address.

Enter the username and password to log in, usually just select the connection mode, adsl, enter the username and password, set the wifi name, and save the password.

In the case of the correct connection. IE input or.

1.The router is connected to the computer, the computer is set up according to the router manual, and then the router manual is followed to enter the setting page.

2.Go to the router settings page, and in the "System" section, change the username and password.

The specific steps are as follows:

1. Enter the router address, connect the wireless router, enter the address you see on the router in the browser, generally if you use ** online Internet at home, then you need to prepare an additional modem, commonly known as "cat").

2. Enter the corresponding account password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the setting wizard, and then enter the operation interface, you will see a setting wizard on the left, and you will enter it (generally it will pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet mode setting, you can see that there are three Internet access options, if the home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the account password, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill it in OK.

7. Set the password of the router, and then enter the wireless settings after the next step, then you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode is mostly 11BGNThe wireless security option is to choose WPA-PSK WPA2-PSK, which is so safe that it will not be easily cracked and rubbed by the network.

8. The next step is to set it up successfully.

9. Click Done, the router will automatically restart, and then wait patiently for the interface that will appear after success.

Summary: How to use a wireless router, is a more common problem, but also a relatively simple problem, I believe that as long as you have an experience, you can also become a god, of course, the router settings are far from only these simple content, there are more setting options after logging in to the router settings page, set other options, such as binding MAC address, over IP, firewall settings, etc., can make your wireless network more secure, to prevent being rubbed off the network.

A detailed explanation of the router, how to enter the router! How to set up the router! WiFi password settings.

If you are not sure, you can open cmd in operation after connecting to the route, that is, the command prompt, type: ipconfig all, and then press enter, there will be your gateway address, enter this gateway address in the browser to enter your routing settings.

Generally, the default username and password are: admin

Then a dialog box will appear, enter admin, and the password is also admin.

This will take you to the routing settings screen. Then just follow the steps and you're good to go, it's very simple.

When you buy a land tour, you should have a land tour IP and password.

Just press that and you're good to go.

The IP of the router is both.

It is more common for different manufacturers to be unsure of 0 and 1.

Try a few more times.