How to disassemble and clean the filter of Midea air conditioner?

The operation method of opening the Midea air conditioner cleaning filter is as follows: before disassembling the air conditioner filter, carefully open the air conditioner shell. Generally, there are two small card slots glued to the air conditioner shell, and the cover can be gently pulled out.

After opening the cover of the air conditioner, there are often two buttons inside, which need to be gently opened to make the cover fully open. Then take the filter. The filter is easy to hold, but it gets stuck in a couple of slots.

Start by pushing the filter upwards, then gently pull the filter down and take it out. After the filter screen is removed, some air conditioners have black particles, and the filtration is enhanced, so they should be removed separately for cleaning and drying. Then carefully rinse the strainer several times with clean water, brush it several times with a soft brush, and finally leave it to dry in a ventilated place until it is completely dry.

Never bend the filter when cleaning. Although elastic, the plastic ones do not stand up to bending. Precautions for cleaning the air conditioner filter:

Remove the filter element, water intake pipe, and rinse with tap water. Don't use dish soap or anything like that, just rinse it off. Please dry in a cool place, not in the sun.

The filter screen is generally plastic and resistant to high temperatures. Put the cleaned filter back into the air conditioner. If the air conditioner is dirty, clean it in advance.

In this way, the air conditioner will be much cleaner and fresher when it is used again. When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, damage the filter, and affect the use effect of the air conditioner.

The operation method of opening the Midea air conditioner cleaning filter is as follows: Before disassembling the air conditioner filter, carefully open the air conditioner shell, generally the air conditioner shell is stuck with two small card slots, and gently pull the outer cover outward. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently pick open the outer cover to fully open.

Then it is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and then gently drag the filter down after the card slot. After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be removed separately to be cleaned and dried. Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it is dry.

Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending. Precautions for cleaning the air conditioner filter: Remove the filter, take the water pipe and rinse it with tap water, don't use things like dish soap, just flush it.

Put it in a cool place to air dry, do not expose it to the sun, the filter is generally plastic, and it cannot withstand high temperatures. Install the cleaned filter back inside the air conditioner, and if there are dirty places inside the air conditioner, wipe them clean in advance. In this way, the air conditioner will be much cleaner and fresher when you use it again.

When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, which is a damage to the filter and affects the use of the air conditioner.

1. Turn off the air conditioner and unplug it. 2. Pick out the two card slots on the air conditioner shell by hand, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover. 3. Gently push the filter up with your hand and take it out.

4. Put the filter screen under flowing clean water and wash it several times, rinse it and put it in a ventilated place to dry.

Model: Midea KFR-35GW

1. Turn off the air conditioner and then unplug it, which can prevent electric shock in the process of disassembling the filter.

2. Gently pick out the two card slots on the air conditioner shell with your hands, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover, and the air conditioner shell can be completely opened at this time.

3. When the shell is fully opened, find the filter, and gently push the filter up with your hand, and it will be detached from the air conditioner card slot.

4. Put the filter screen under the flowing water and wash it several times, clean the dust on the filter screen, rinse it and put it in a ventilated place to dry.

Summary. 1. Turn off the air conditioner and unplug it.

2. Pick out the two card slots on the air conditioner shell by hand, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover.

3. Gently push the filter up with your hand and take it out.

4. Put the filter screen under flowing clean water and wash it several times, rinse it and put it in a ventilated place to dry.

1. First of all, open the shell of the air conditioner, and then you can see the filter screen of the air conditioner, generally there are two card slots outside the air conditioner, and you can open it by gently pulling the card slot outward.

2. After the outer cover is opened, it is easy to remove the filter screen, as long as the lower part of the filter screen is grasped, and then gently dragged down, generally speaking, the air conditioner has two filters.

3. After taking it off, use a fine-haired toothbrush to clean the dust on it.

4. After cleaning, be sure to dry the filter.

5. Because there is a card slot on the top of the filter screen, generally speaking, the card slot is facing down.

6. Stuff the filter screen into the host along the card slot, and lay the filter screen flat.

7. After the filter is installed, buckle the shell.

Midea air conditioningHow to disassemble and wash the filter:

Tool Material: Midea three-dimensional air conditioner E8500, screwdriver.

Method Steps:1. First turn off the air conditioner, unplug the power supply, and there are two covering screws on the panel of the air conditioner machine.

2. Use a tool to pick open the cover that covers the screws, and then use a screwdriver to take out the two screws.

3. After unscrewing the screws, remove the cover, then take out the filter inside, first use a brush to brush off the dust, and then you can rinse it under the faucet.

4. After rinsing, wait for the filter to dry, and then plug it back in, so that the disassembly and cleaning of the filter screen is completed.

How to remove and wash the filter of the Midea air conditioner:Disconnect the power supply first, and push the two small card belt slots that are stuck in the air conditioner shell outward, and only after the air conditioner shell is opened can you see the filter inside the air conditioner. There are also several small card slots around the filter screen, as long as the filter is gently pushed up, and then out of the card slot, the filter can be removed from the top down.

Simply put it in the water and scrub it with a brush.

Precautions for the installation of air conditioners:1. Midea air conditioners are normally installed by after-sales masters, if you want to install air conditioners by yourself, we must first make a hole in the wall to connect the drainage pipe of the indoor unit and the outdoor unit.

2. The height of the drainage pipe installation is very important, if the height deviation is too large, it will directly affect the normal use of the air conditioner, and it will also cause the problem of water leakage in the air potato adjustment, so it will be better to choose to hand over to the professional and technical master to help install the effect.

The specific steps of dismantling and cleaning the filter screen of the Midea air conditioner are as follows:1Turn off the power to the air conditioner and remove the air conditioner panel and air filter.

2.Press the clips on both sides of the air filter to remove the air filter cover. 3.

Remove the two shields and use a screwdriver to remove the filter fixing screws. 4.In the order of installation, install shields on both sides of the filter and tighten the fixing screws with a screwdriver.

5.When reinserting the air filter cover, pay attention to the position of the corresponding holes in the buttons on both sides and gently insert the buttons. 6.

Install the air filter, put the air conditioner panel back on the air conditioner, clamp the lower part tightly, and then lift it up for installation. 7.Turn on the power of the air conditioner and enjoy the fresh air.

Dear, the following are the specific steps for Midea air conditioner to disassemble and wash the filter:1Find the location of the air conditioner's filter, usually on the panel in front of the air conditioner.

2.Easily push out the filter by hand and place it in a soft place. 3.

Wash the filter thoroughly with warm water, but do not use brushes or other hard objects. 4.Dry the strainer or dry with a clean towel.

5.Place the filter back inside the air conditioner and make sure it is securely installed. What needs to be paid attention to early is that:

1.When removing the filter, make sure the air conditioner is turned off and unplug it. 2.

The filter should be cleaned at least once a month, or if it is found to be dirty during use.

The following are the general steps to remove and clean the Midea air conditioner filter: Type Liquid Search 1First, turn off the power to the air conditioner and unplug it.

2.Open the air conditioner panel and find the filter screen. It is usually located in the upper or lower part of the panel.

3.Gently pull out the strainer and rinse with warm water. 4.

If there is sediment or dirt on the filter, gently brush the filter with a soft-bristled brush. Do not use a brush that is too hard or too thick to avoid damage to the filter. 5.

Be careful when flushing the filter, and tear off the filter if it does not leak, so as not to affect its service life. 6.Leave the cleaned filter dry to make sure it is completely dry.

7.When installing a dry filter, pay attention to the direction or position. Make sure it is properly installed in place, otherwise it may affect the air purification effect.

8.Finally, reinstall the panel and plug it in. The above are the steps to remove and wash the filter under normal circumstances, different models of Midea air conditioners may be different, it is recommended to refer to the instruction manual or contact professional maintenance personnel for operation.

The method of removing and cleaning the filter of Midea air conditioner is as follows:Material preparation: air conditioner, air source filter, manual, sink, detergent, towel, etc.

1. First turn off the power supply of the air conditioner and unplug the power plug.

2. Open the air conditioner panel and find the location of the filter.

3. Take out the filter from the air conditioner, generally you need to push it up hard or operate it according to the method on the manual.

4. Put the filter into the sink and rinse it with running water or gently rub it to remove the dirt on the filter screen.

5. If there are stubborn stains on the filter screen, you can use some special cleaning agents, or clean them according to the method on the manual.

6. After washing, use a clean towel to absorb the excess water.

7. Put the filter back in place and ensure that it is installed firmly.