How to clean the filter of the Midea air conditioner, how to clean the filter of the Midea air condi

Midea air conditioning. How to remove the filter? 1.

Before disassembling the cabin air filter, carefully open the cabin air conditioner case. Generally, there are two small card slots stuck on the air conditioner shell, and the outer cover can be gently pulled outward. 2.

After opening the outer cover of the air conditioner, there are often two buckles inside, which need to be opened gently to make the outer cover fully open. Then take the filter. The filter is easy to hold, but it gets stuck in a couple of slots.

Start by pushing the filter upwards, then gently pull the filter down and take it out. 3.After removing the filter, some air conditioners will have black particles with enhanced filtration, which should be removed separately for cleaning and drying.

Then carefully rinse the strainer several times with clean water, brush it several times with a soft brush, and finally leave it to dry in a ventilated place until it is completely dry. Never bend the filter when cleaning. Although elastic, the plastic ones do not stand up to bending.

How to clean the air conditioner filter? Remove the strainer, take the water pipe, and rinse with tap water. Do not use dish soap.

Stuff like that, just rinse it and you'll be fine. Please dry in a cool place, not in the sun. The filter screen is generally plastic and resistant to high temperatures.

Put the cleaned filter back into the air conditioner. If the air conditioner is dirty, clean it in advance. In this way, the air conditioner will be much cleaner and fresher when it is used again.

When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, damage the filter, and affect the use effect of the air conditioner.

The operation method of Midea air conditioner cleaning filter is as follows:Equipment: Midea air conditioning.

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Turn on the air conditioner panel switch, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

7. Rinse the filter with clean water.

The operation method of Midea air conditioner cleaning filter is as follows:Equipment: Midea air conditioning.

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Turn on the air conditioner panel switch, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

7. Rinse the filter with clean water.

First of all, in order to prevent electric shock and leakage accidents, it is necessary to turn off the power socket, or you can directly unplug the socket, which is very important. If you find that it is not easy to open by hand, you can use a screwdriver to help, do not use brute force, and master the skills, otherwise it is easy to damage the air conditioner shellThen it is to take the filter, after opening the shell, and then raise it above the air conditioner, the filter screen is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and after the lower end is out of the card slot, then gently drag the filter down.

4.After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be removed separately to be cleaned and driedIf there is too much dirt or thick dust, you can shake the filter first.

6.Wash with tap water, if there is a lot of dirt, you can also use air conditioner foam cleaner to spray the filter and dry it with a soft cloth. Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

Finally, let it dry in a ventilated place until it dries through. 7.Reinstall the dust filter, cover the air conditioner shell, and gently wipe the air conditioner panel with a soft cloth dipped in warm water, not too hard to avoid damaging the coating on the panel.

1. When cleaning the air conditioner filter, the power cord of the air conditioner should be unplugged first to fully ensure safety;

2. Lift the air conditioner panel and lift it, then we can see the air conditioner filter, and then remove the air conditioner filter;

3. When removing the air conditioner filter for cleaning, if there is not much dust on the filter screen, you can use clean water to rinse directly, but be careful not to rinse the dusty side, and do not use dish soap with strong acid and alkali. If a lot of dust has accumulated on the filter screen, you can soak the filter screen in a neutral detergent solution;

4. After cleaning the filter screen, the moisture on the filter screen will be dried, and at the same time it will be placed in a cool and ventilated place to dry, but it cannot be directly exposed to the sun;

5. When putting the filter back into the air conditioner, you need to wipe the inside of the air conditioner, so that it will be cleaner when you use it again.

Give a thumbs up, brother.

Questions. The beauty key is I don't how to open, please guide.

Here's how to clean the air conditioner filter:1. Find the air inlet grille on both sides of the air conditioner and pull out the filter screen with a little force, and rinse it with water below 40 degrees.

2. If it is dirty, you can use a soft brush to gently scrub it, wash the filter screen, shake the water dry first, and then put it in a ventilated and cool place to dry naturally.

3. During the drying process of the filter screen, you can wipe the air conditioner with a rag, which is conducive to the use of the cleaned filter screen in a clean environment, and finally the cleaned filter screen can be installed.

The operation method of Midea air conditioner cleaning filter is as follows:Here's how:

Equipment: Midea air conditioning.

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Turn on the air conditioner panel switch, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

7. Rinse the filter with clean water.

The filter of the Midea air conditioner is in the indoor unit of the air conditioner, you only need to open the shell, and then you can see the filter, you only need to gently pull the filter back to clean, it is very simple.

Hello, I'm glad to answer your questions. First of all, open the cover of the air conditioner room, take out the filter screen, brush most of the dirt attached to the net with a clean brush, then soak it in the cleaning solution for 10-20 minutes, and gently brush the filter screen with a brush after soaking, so that each filter hole has no dirty traces, and finally wipe it clean with a dry cloth, check that it is intact, and after installing it on the body, depending on whether the operation is normal.

Question: How to open the indoor cover?

There is a groove on both sides of the pro-hang-up machine, which can be pulled outward; The cabinet panel is divided into screw fixing and magnet adsorption, if there are screws, the screws need to be removed, and if there are no screws, the panel can be opened by lifting it up.

1. The filter cleaning steps of Midea's vertical air conditioner are as follows:

1.First, turn off the air conditioner and unplug it. Do not clean the filter while it is powered on.

2.Open the filter cover on the left and right sides of the fuselage and take out the filter screen.

3.Put the strainer in clean water, it is recommended that the water temperature is not higher than 40, and add an appropriate amount of cleaning liquid (or neutral detergent).

4.Gently rub the filter with both hands to fully soak the filter in clean water and cleaning solution to clean impurities such as stains, dust and bacteria. During the cleaning process, special attention should be paid to gentleness, not too much force, otherwise the filter may be damaged.

5.After cleaning the filter, rinse the filter with running water until there is no foam. Be careful to rinse well so that the surface of the filter is completely free of any cleaning agent.

6.After the filter is dried, reinstall it back on the air conditioner. Pay attention to the smile when installing, align the filter screen and the air conditioner body correctly, and press it gently.

7.Plug it in, turn on the air conditioner, and check that the filter is installed correctly.

The above is the cleaning method of Midea's vertical air conditioner filter, and it is recommended to clean it every once in a while to ensure that the air conditioner performance is stable and clean and hygienic. <>

How to remove and wash the filter of the Midea air conditioner:Disconnect the power supply first, and push the two small card belt slots that are stuck in the air conditioner shell outward, and only after the air conditioner shell is opened can you see the filter inside the air conditioner. There are also several small card slots around the filter screen, as long as the filter is gently pushed up, and then out of the card slot, the filter can be removed from the top down.

Simply put it in the water and scrub it with a brush.

Precautions for the installation of air conditioners:1. Midea air conditioners are normally installed by after-sales masters, if you want to install air conditioners by yourself, we must first make a hole in the wall to connect the drainage pipe of the indoor unit and the outdoor unit.

2. The height of the drainage pipe installation is very important, if the height deviation is too large, it will directly affect the normal use of the air conditioner, and it will also cause the problem of water leakage in the air potato adjustment, so it will be better to choose to hand over to the professional and technical master to help install the effect.

The operation method of Midea air conditioner cleaning filter is as follows:

1. First of all, before disassembling the air conditioning filter, you need to carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots, and gently cut the outer cover outward.

2. After opening the outer cover of the air conditioner, there will be two buckles inside, and you need to gently open it to make the outer cover fully open.

3. Then take the filter, the filter is easier to remove, it is stuck by a few card slots, first push the filter up, and then gently pull the filter out of the card slot.

4. After removing the filter, some air conditioners have black particles that strengthen the filtration, which need to be taken off separately for cleaning and drying.

5. Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until the chain is dry. Be sure not to bend the filter when cleaning.