How to install the limit switch on the EBZ160 Sany Heavy TBM?

When installing, it is best to use a screwdriver directly for installation, or it is also possible to use a plum screwdriver for installation.

If you want to install a limit switch on the excavator of the EBZ16 Sany Heavy Equipment, you can ask the excavator technician who will operate it, and they should be able to.

BZ160 Cantilever TBM Instruction Manual Section 2 Main Structure I. Overall Structure Sany Heavy Loading TBM is hydraulic. The filter bracket is welded on-site on the second conveyor.

In general, the limit switch installed by him will have a relevant statement on the corresponding switch, and you will know by looking at this manual yourself.

It's okay to install it from the official.,I think you can just install it from the official.,It's very convenient.。

In the operation of the excavator, if you want to install a limit switch, you can only replace it on the original basis.

You should find a master in this area, and you will install a limit switch on your face.

The performance of this excavator is still relatively good, but when using the restriction to open the coffin, you must adjust his forward and so on.

Hello, follow the instructions to go up. Or call the after-sales customer service, and they will deal with it as soon as possible.

It turns out that this can be installed with a wire switch, and it is better to get your fiber switch.

Bin Bin in 10031 reinstalled to learn how to install three switches on the 20, this should be the nail to install it again, this should be better employment to use.

Take a look at the three-wheeled excavator, find a professional master, and help you solve this problem.

Off-site Z16031 reloaded excavator. How to install a limit switch on the second transport? You can find a professional according to this, and it will be installed for you.

EBZ 16031 reloaded stunt total in two cubic switches? Buy whatever you like.

How did the BEBF 1631 Heavy Loader install a limit switch in February? This is two controls, which is safer and complete.

This question is the obligation of Sany Service Engineers!

You can find a professional service engineer to serve you, but what do you ask?

First, the cantilever section is filled with lithium-based oil, and we also mix some gear oil. There is an M24 plug above the cantilever section, which opens the filling.

2. The two-stage planetary reducer is filled with No. 320 industrial gear oil. There is a wire plug above the secondary planetary reducer, and the size is forgotten. The filling method is to raise the cutting part to a near-horizontal position, open the exhaust on the side and observe the plug of the oil level (there are two, the above one shall prevail).

When the oil level flows out of the mouth where the oil level is observed, it is good to tighten the plug.

3. Fill the coupling of the two-stage planetary reducer and the cutting motor with lithium-based oil.

4. Fill the front and rear sides of the cutting motor with lithium-based oil to lubricate the bearings on the front and rear sides.

5. Each pin shaft in the cutting part is lubricated with lithium-based oil.

I have the Taiyuan Coal Research Institute EBZ160TY drawings but there is no electronic version, my QQ number is 4783831035, working in Pingmei, you can ask me questions about EBZ160, I am responsible for the maintenance staff, the questions can include EBZ160 electrical, hydraulic, mechanical problems, this model has been used in our unit from 06 years to now, we have a certain maintenance experience!

This thing in Taiyuan looks ordinary, but there is no one on the Internet, who are you, are you sure I have it?

Competing fucking farts, asking questions and not answering.

Sales in Sany is a relatively fat profession, but risks and benefits coexist Before you make a profit, you must invest a lot of money into it, whether you can come back depends on your own ability, this society can mix it, it is not difficult to enter Sany, the difficult thing is to mix in Sany, especially the sales and after-sales. That's all for lz leisurely I have a friend who said that Trinity is heaven from afar and hell from close up 0...0

Hello, Shandong Ed is happy to answer your questions. Sany Heavy Industry EBZ160 TBM basically uses the picks of AID Ed U135 (S135), which is this model.

Sany Heavy Installation EBZ160 TBM uses pickaxe picks with a tail diameter of 30, and the commonly used brands are Kenanmet and Sandvik, which are produced by joint ventures, and the quality is OK! The number of picks for Sany EBZ160 is 41!

The working environment of the EBZ160 cantilever TBM.

1. Atmospheric pressure (;

2. The altitude shall not exceed 2000 meters;

3. Ambient temperature: -5 +40;

4. The relative humidity of the surrounding air is not more than 95% (+25);

5. It is suitable for use in tunnels or mines containing gas, coal dust or other high-quality mixed gases;

6. No corrosive metal and damage insulation in gas environment;

7. There is no place for long-term continuous dripping.