Playing CrossFire with low FPS or cards, it shouldn t be a configuration problem

It should be fine.

I recommend you to the next app called GameBooster.

Absolutely OK

It should be your graphics card driver problem. It is recommended that you drive your next life. Automatically update the driver. If it's not good. Only the redo system.

It's not a problem with the graphics card, it's definitely a problem with the server you're on, and the tx server is garbage.

There are a lot of people, CrossFire XP doesn't work Sometimes, the card bursts It's not a problem with the network speed and configuration, it's a problem with Tencent, lz sets me to the best, I'm useful, hehe, thank you.

and configuration without problems. The average computer memory is 2G, and the graphics card is around 512 to 1G. The CPU cores are all dual-core.

If your CPU is single-core, then your computer can't run more programs, run more, and occupy CPU usage. CF occupies a large amount of memory and CPU usage. That's just the example I gave ......If your computer is lower than that, then there is a problem with your configuration, not the internet speed.

There is also a tool where you can use Optimizer to optimize your computer and check for viruses and Trojans. If there are viruses and Trojans, kill them, and clean up plugins and garbage. If there are too many plugins, it will take up space and network speed.

There is also the bandwidth of your home, if it is 2 megabytes, as long as you don't get something, it won't get stuck, basically the same as an Internet café.

Redo the system and reinstall the graphics card driver, but it still doesn't work, so you can only change the graphics card......

I have the same issue. It should be the reason for the server, and the fps value has been very stable since the last update. It is recommended that you turn down the texture effect in the settings, which should be better.

FPS has something to do with the display resolution, and the resolution is also stuck. In addition, skip FPS may also be related to the network, data transmission and ** refresh and so on

Now CF is getting more and more demanding on configurations, and mine is the same.

There should be too many people to bear the server.

Could it be that there are too many people to put a large burden on the system, which affects the normal operation of the game?

I can't give an authoritative answer to whether the configuration is enough or not, but experience has taught me that the best performance can only be achieved by a balanced computer configuration, and it is not a unilateral enhancement or the ideal approach.

Old PC configuration.

CPU: Dual-core.

Motherboard 945 integrated.

1gddr2

Memory Originally, according to the data given by the official, it was qualified.,Except for the graphics card.,The fps of playing is below 20; I asked a lot of netizens and sellers who said that as long as you change to a separate display, you can play the game smoothly, well, change to a 410 yuan independent display, fps is only 30-40, that's really full of bitterness, it's still a little stuttering to play.

In addition, there is a computer with the following configuration:

cpu：amd

Dual-core motherboard: Rainbow.

785T RAM: DDR3

1333mhz

The whole host is just 1800.

In contrast, the configuration is better than that of an Internet café, (except that there is no independent display). In addition, the colorful motherboard is only 430 yuan, integrated ATI4200 graphics card (256M video memory, 32-bit width).

Well, turn on Crossfire, it's so exciting, the integrated graphics card can keep the FPS at least above 50, basically around 60, and the year-on-year comparison is also higher than that of Internet cafes, absolutely smooth.

Well, the synthesis can show that although the independent display is important, the configuration needs to be balanced, otherwise there will be a bottleneck.

Don't say much else, compare it yourself, if someone else says that as long as you change to a separate display, it's absolutely okay, I'll definitely make him cool.

1. The refresh rate of the display is controlled by the graphics card, and a VSC signal will be generated after the graphics card completes the scanning of a frame, and if the number of FPS of the game screen can reach or exceed the refresh rate of the display after turning on VSync, the number of FPS of the game screen is limited to the refresh rate of the monitor.

If you can't reach it, there will be different degrees of frame skipping, and the larger the gap between FPS and refresh rate, the more serious the frame skipping.

With VSync turned off, the screen tearing is almost invisible in other games except for games with high-speed movements.

Step 1: Desktop Properties Settings Advanced Graphics Options Launch NVIDIA Control Panel Manage 3D Settings Turn "V-Sync" off.

2. The graphics card has a backlog of dust or poor heat dissipation.

Method: You can use a soft brush to clean the graphics card, and add silicone grease to the heatsink to help the graphics card dissipate heat.

Is the graphics driver ?? good

If you have a discrete graphics card, do not plug the data cable into the motherboard's interface.

How low it is,,, below 60 you see if the graphics card is too gray ,,, clean it up.