Sometimes your iPhone won t charge

If it is said that the charger and charging cable are plugged in, the mobile phone charger is unresponsive. This may be caused by a dirty charging head, and sometimes it can be charged by changing sides.

You can carefully inspect the electrodes of the charging head for dirt. If there is, try scraping with a non-metallic sheet until all the electrodes are shiny. As for how many of these charging cables I handled.

Hello landlord, it may be that the charger of the iphone is not suitable, it is not the original adaptation, or it may be that the battery or equipment of the iphone is problem......atic

The charger is broken, replace the data cable, etc.

Whether the Apple mobile phone is charged or not for the first time, what we have to consider is, is it because of too much dust in the interface of the Apple mobile phone?

In this case, we only need to use a toothbrush to clean up the dust on the mobile phone interface, and basically we can restore the charging of the Apple mobile phone.

If this is not caused by too much dust after plugging it in, then we need to check whether there is a problem with our charger plugging, such as the charging head or charging cable or interface?

If it's the reason for the mobile phone interface, then the only way to disassemble and repair it at this time is to disassemble it.

The iOS system is not good enough in terms of fluency, and many fruit fans joke that as long as the iOS system is updated, the fluency of the iPhone plummets. Last year, the iPhone was exposed to the "frequency reduction gate" incident, which made many people feel very angry, and at the same time, everyone's desire for system updates is getting smaller and smaller.

There are seven main reasons why Apple phones can't be charged.

There are no electrical outlets.

You need to confirm that the outlet is powered on. You can plug in other electrical appliances to confirm whether there is electricity. If your iPhone still won't charge after the power supply is confirmed, follow the instructions below to investigate further.

The iPhone charging cable or adapter is damaged.

If the charging cable or adapter is damaged, the phone won't charge. Before trying to charge your phone, you can change the charging cable and adapter.

A non-original charging cable or adapter was used.

It is recommended to use a charging cable or adapter purchased from official channels. If you use a charging cable or adapter purchased from an unofficial source, it may not be compatible with your phone, causing your phone to not charge.

There is a foreign object in the charging port of the Apple phone.

Check the charging port at the bottom of your iPhone for foreign objects. If there is a foreign object, you can clean the charging port with a brush. If the charging port of the Apple mobile phone is corroded, you need to take the mobile phone and the purchase voucher to the Apple customer service center for inspection and repair.

There is a bug in the Apple Handy Orange system, and the charging process is not displayed.

There may be a bug in the Apple system. When the phone is charging normally, the phone will not display the charging icon. At this time, you can press and hold the power button of your phone, restart your phone, restart your hand, and try charging again.

If it still won't charge after restarting, you need to upgrade your iPhone to the latest version and try charging again.

The temperature of the iPhone is too high, more than 35

Apple phones use lithium batteries. When the temperature is higher than 35 degrees Celsius, Apple phones will restrict the phone from charging to avoid battery damage. Therefore, when the temperature is too high, it is necessary to cool the phone before charging.

There are many ways to cool down your phone, such as stopping use, putting it on a floor with a low temperature, wiping it with cold water, etc.

Apple's battery has problems with hardware such as filial piety.

If the iPhone still won't charge after the above investigation, you need to bring your phone and proof of purchase to the iPhone customer service center for inspection and repair.

iPhone won't charge Reason:

1. The battery is excessively worn out and has been completely damaged.

Generally speaking, this situation is relatively rare, and you can check the battery health first through the methods we taught above. A normal iPhone battery health of more than 85% within one year and more than 75% within two years is normal.

But if you have dropped by 80% after one year of use, there are only two possibilities, one is that you have bought a fake, and the other is that you have often committed the behavior of damaging the battery mentioned in the previous section. I've seen people who charge their batteries almost several times a day because of playing card games, but in less than half a year, the battery health of their mobile phones has dropped to 78%.

2. The battery management IC is damaged.

In this case, most of the reasons are that the motherboard components are desoldered due to the mobile phone falling to the ground, and the probability is very small. If the battery can't be charged and says that the motherboard is damaged, the small store will charge you more than 500 so-called replacement motherboard fees, in fact, you only need more than 100 buried to replace the power IC.

3. Non-original charger, the charging cable is damaged.

This is easy to do, ask someone for an original iPhone charger and charging cable to try it.

4. Mobile phone system failure.

Press the power button + home button at the same time until the Apple logo appears, force restart the iPhone, it should be solved.

You guess the oak is a good kiss, and I'm glad to answer for you. The reasons why the iPhone can't be charged may be: 1. The battery is overworn, has been completely damaged, and the battery cannot store power; 2. The battery management IC is damaged. 3. The charger is not the original, or the charging cable and charging head are damaged; 4. Apple mobile phone system failure; 5. The gold finger of the charging port is oxidized or dirty.

In short, the Apple mobile phone charger can not be charged, first of all, check whether there is a problem with the charger, it is best to replace the charger to detect, and then check the mobile phone battery and mobile phone system, generally speaking, there is no major problem to dig and roll, at best, it is to replace the charger or replace the battery, but it should be noted that the original must be replaced, at least the quality is ***.

Hello, dear, I am happy to answer for you, the iPhone mobile phone cannot be charged for the following reasons: 1. The charger Peichang is damaged. First check whether the socket has electricity, it is best to use the original charger to charge, if it can't be charged, try to change the socket or charger.

2. Oxidation of the gold finger of the charging port. If there is something dirty or oxidized in the charging port of the mobile phone, it will affect the charging effect and cause it to be unable to be charged. 3. Mobile phone system failure.

Press and hold the power button and the home button at the same time until the Apple logo appears, force restart the phone, or restore the phone to factory settings. 4. Excessive battery wear or complete damage. You can check the battery health in the mobile phone settings, the battery health of the Apple mobile phone in normal use is more than 85% within one year, and it is normal to be above 75% within two years, if the loss is excessive, it will affect the charging, and the battery needs to be replaced.

5. The battery management IC is damaged. A drop in the phone may cause the motherboard components to become desoldered and the motherboard needs to be repaired. I hope I can help you and I wish you a happy work and life!

When the mobile phone is charging, it shows that there is a liquid detected, and if it cannot be charged, it may be that the charging port of the mobile phone has accidentally entered the water, or the air humidity is high, and water vapor has slowly accumulated in the interface.

The solution is like slipping under the front:

1. Turn the mobile phone interface down, gently pat the mobile phone with your hand to drain the liquid in the mobile phone, and then put the mobile phone in a ventilated and dry place to dry for a day, and then try to charge it.

2. Wipe the charging port with a cotton swab or paper towel to clean up the dust and water vapor before charging.

3. Turn off the phone and restart it.

4. If you confirm that the mobile phone is not flooded, you can use a hair dryer to open a low gear and blow the interface a little, and the letter chain can be restored, if the mobile phone is flooded, it is not suitable to use a hair dryer, which will blow the water into the mobile phone and damage the motherboard hardware.

5. If it really doesn't work, you can only send the mobile phone to the after-sales inspection to see if there is a problem, and then repair it.

Precautions: 1. Do not use an external heat source or compressed air to dry your iPhone.

2. Do not insert foreign objects (such as cotton swabs or paper towels) into the lightning connector.

3. Do not put your iPhone in a rice bag. If you do this, the millet grains may damage your iPhone.

5. Although you shouldn't charge your iPhone when it's wet, you may still need to do it in an emergency. If you connect your iPhone to a lightning cable or accessory again, you can ignore the liquid detection reminder and continue charging your iPhone in an emergency.

6. If you have a wireless charger, you can still use it to charge your iPhone. For best results, make sure the back of your iPhone is dry before placing it on a Qi-certified charger. <>