It is best to configure the computer, it takes a few seconds to turn on, how to configure

My computer is usually about 40 seconds.

In general, the fewer programs are initiated.

Then the faster it boots, the faster it becomes.

It can be optimized with Kingsoft Guard.

According to the current 2012 general configuration, it is in (26 seconds-33 seconds), my computer is in 27 seconds, but only install QQ, Kugou PPS, QQ** and some normal software.

A read cycle, related to the bus frequency of the motherboard, uses flash memory, and does not erase when the power is off.

The reason for the configuration of the computer restart: the window system will have a variety of large and small updates almost every day, including the system itself and offic software, IE browser, and other updates to various accessories, relatively important plug-ins when updating, it is recommended to update, it will occupy the system disk space.

After the update is completed, if you want to update it in the future, you can operate according to the following methods;

Open the Start button and find Control Panel

Open the Control Panel, find Windows Update, and double-click to open it.

Once opened, find "Change Settings" on the left side

In Reset Updates, select Never check for updates to make sure to save.

The steps to set it up correctly are as follows:

1. Open the "Computer" on the desktop first, and then click to enter 2, then click the mouse to click "Open Control Panel" above, and then click to enter 3, then enter the control panel, and then click the mouse to click the "WindowsUpdate" item, and then click to enter.

4. Next, enter the windowsupdate settings item, and then click "Change settings" on the left side of the mouse, and then click to enter, I hope it can help you, I wish you good health, all the best, and all your wishes come true!

Answer: This is because the user installed the system update before the last shutdown will be configured on the next boot, under normal circumstances, as long as you wait for a while to enter the system, if you can't enter the system for a long time, then it may be that there is a problem with the update.

Preparation: Before proceeding with the following operations, you can try it first, and the last correct configuration will see if it can enter the system.

Here we are divided into two situations, if you can enter the system after waiting for a period of time, then follow the first method, otherwise this is the second method to solve.

Solution 1:

1.Find a flag icon in the lower right corner of the taskbar of Win7 desktop, right-click the pop-up dialog box, and click "Open Action Center".

2.Find "Change Settings" in the pop-up page and click on it.

3.The page jumps, where you find the words "Important Updates", there is a drop-down button below, click on it, select "Never check for updates" in the drop-down menu, and click OK. Of course, there are other ways to do this, but step 4 below is to introduce you to another way to set up.

4.Right-click on the Win7 desktop, the right drop-down menu pops up, find "Personalization" in it, and click on it.

5.A page pops up, find "Control Panel Home" in the left column of the page, and click on it.

6.The page jumps and then finds and clicks on the "System and Security" option.

7.Find the "Windows Update" option on the right side of the page, select "Enable or Disable Automatic Updates" below the option, click on it, the page jumps to the page in step 3, and then press step 3 to set it up.

Solution 2:

1. Restart the computer, you can use force start, then press the F8 key to select safe mode;

2. After entering the safe mode, open the control panel and select "Uninstall" the program;

4. Find the most recently installed update according to the date, right-click Uninstall;

Right-click Uninstall.

5. After uninstalling the update, restart the win7 system to see if you can enter the system.

Hello friends!

When you first start up your computer, press F8 and select "Last correct configuration that worked" or Safe Mode, and it may be fixed.

When you're done, please give me the answer. Thank you.

It is highly recommended to ask a professional maintenance master to help you get it, because every time you boot the machine needs to be configured, it is really annoying and frustrating!

Do you have a wind7 system installed?

If so, it is the configuration after your system is updated, as long as you don't choose not to update or update it once a week, as shown below

Install the drive with the drive life.

In addition to the CPU, memory and motherboard, the hard disk is a major component that affects the boot speed, and the faster the hard disk reads the code, the faster the boot will be. Therefore, if you blindly want to boot up quickly, then in addition to the high-frequency CPU, DDR3 high-frequency large-capacity memory and a good motherboard, you need to have an SSD to make the system disk.

The kind of light master you said about turning on for 10 seconds also costs more than 3000, and your budget is only 2000. I'm afraid it's hard to do.

Fast boot, first of all, the hardware compatibility is good, the hardware configuration is high, and the hall is stupid, such as the hard disk reads and writes quickly.

The cup runs fast, and then your system is installed quickly, the software is involved, the BIOS settings, no viruses, and the driving tour is correct.

There are not too many boot startup programs and so on affect the boot time, one of the most common slow boot is that the software is special boot grinding boot program, and the mouse can not be clicked for half a day.

A computer with fast hard disk access and fast CPU boots up quickly. The introduction is as follows:

The modern computer is von. Neumann computers, which are memory-centric, and any programs that need to be run must first be loaded into memory.

The process of turning on a computer is the process of loading the programs needed by the operating system into memory (including the loading of some drivers and services, of course).

Load the program into memory with a hard disk,It takes a lot of disk reading operations,If the hard disk is fast,Then the loading is fast,If the CPU speed is fast,It will also accelerate this process,Because the speed of the memory is much faster than the hard disk,So the speed of the memory is not too big in the process of booting。

Since the speed of SSDs is much faster than HDDs, it can also be said that computers with SSDs boot up faster.

3 seconds is impossible, it's not a hardware problem, the BIOS self-test is 2 seconds, a software program problem.

The configuration and optimization are a little better, and the SSD is normal for 9 and 15 seconds.

Ways to solve the problem of slow computer and stuck: (Add computer memory module, sometimes you can also solve the cause of slow computer).

1.Computer boot startup items, optimized. Turn on 360 Security Guard - Boot Acceleration.

2.Usually use tools such as 360 Security Guard to clean up system junk and temporary files (IE cache) generated by surfing the Internet, and check and kill malware.

3.Try to set the IP address to a static IP address to reduce the boot time of the computer.

4.Don't put too many files and icons on the computer desktop, which will slow down the computer's response, and try not to install the software on the C drive. There are too many C disks, and you can also use 360 software housekeeper - toolbox - software to move and solve it.

5.Close some startup programs. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off.

360 Software Manager - Computer Acceleration, Intelligent Optimization Boot Acceleration.

6.It is recommended to install only one main antivirus software, as installing multiple will take up computer resources and make the computer slower.

7.Regularly defragment the disk, open my computer to defragment the disk - Properties - Tools - select the defragmented disk to open the "Disk Defragmenter" window - analyze - defragment - the system will start to defragment.

8.On a regular basis, clean up the dust in your computer.

9.Regularly clean and optimize your computer.

10.The computer hard disk is used for a long time, it will also make the computer slower, repartitioning and installing can fix the logic is bad, the computer will be faster, and the physical read and write speed of the hard disk is slow, and it can only be changed to a better point! The memory module can also be erased down to prevent oxidation.