What to do if the water pipe is clogged, what to do if the water pipe is clogged

You can go to the market and buy the unclogging agent and pour it at the inlet of the water pipe. Then after waiting for a while, the pipes will slowly unblock.

If the water pipe is blocked, you can also insert a log into the pipe, then put some water in the pool, and then quickly pump the log. Then, under the action of pressure and suction, the material in the pipe will be washed away.

1. First of all, you need to check the tap water pipeline to understand the circuit of the pipeline, and then determine the specific dredging plan. Before dredging, we should prepare our own three-way warm water, and then connect the washing machine and the air compressor. Turn the main inlet valve to the closed state, drain the water in the water pipe circuit in the home, then remove one of the faucets, connect the faucet to the cleaning equipment where we need to clean the water pipes, and then inject the citric acid solution into the household water pipes.

2. The water pipe is the pipeline of water supply, and the modern decoration water pipe is the use of buried wall construction, and there are three kinds of water pipes, the first type is metal pipes, such as hot-dip cast iron pipes, copper pipes, stainless steel pipes, etc. The second category is plastic composite metal pipes, such as plastic composite steel pipes, aluminum-plastic composite pipes, etc. The third category is plastic pipes, such as PB and PP-R.

1. Hair constitutes sewer blockage: After the sewer is used for a period of time, the hair that usually takes a bath will hang on the pipe wall and accumulate too much, which will constitute a blockage, and the hair will usually constitute a blockage of the toilet floor drain, washbasin blockage, bathtub blockage, and shower room blockage. Therefore, when using it, it is necessary to cover the floor drain cover and other protective equipment, and if there is hair, you can pick it up and throw it into the trash.

2. Oil scale blockage: Oil scale blocking the sewer usually appears in the kitchen, this blockage is usually the scaling of the inner wall of the pipeline, and the sewer is not dredged after the severe scaling of the pipeline. With a simple dredging method can not be handled, there will be just dredged and blocked, blocked, blocked, blocked, such is a vicious circle, to thoroughly deal with the only way is to use a high-pressure water truck to clean the inner wall of the pipeline, or replace the pipeline.

Relatively speaking, the use of high-pressure cleaning vehicles for dredging is more economical.

3. Pipeline collapse and pipeline dislocation: This kind of blockage usually occurs on the ground floor and outdoor sewers. There is no good way to deal with it: only find the location of the dislocation of the collapse, dig up and replace the pipe, and use the pipeline TV (pipeline detector) to identify.

Pipeline blockage can be dealt with by the method of water pressure dredging, which first needs to block the other outlets of the pipeline to avoid air pressure leakage, and then align the water pipe with the blocked pipe, open the maximum flow of water, and impact the foreign matter in the pipeline until the foreign matter is removed and the pipeline is dredged.

2. Acid and alkali dredging.

The acid-base reaction can be used to unclog pipes. Pour an appropriate amount of vinegar and baking soda into the blocked pipeline, and the two will have a neutralization reaction to generate a large amount of gas, which has the effect of removing foreign matter, in addition, the acid and alkali will also have a corrosive effect on the foreign matter blocking the pipeline, which is conducive to dredging the pipeline.

3. Wire dredging.

Pipe blockages can be dealt with by wire dredging. First of all, you need to prepare a long and flexible wire, then bend the head of the wire into a hook, stretch the wire along the pipe, and use the wire to hook out the debris in it to achieve the purpose of dredging the pipeline.

Find a section of wire rope, tie it with a wire at the end of about 1 cm, and pull the thin wire back into a barb, the usage is the same as that of a dredger, and the effect is very good. The wire rope can be used for bicycle soft brakes, but it is a little soft to use when it is thin, and you can make do when you can't find it. Pulling it out when it doesn't turn will hook the swag out.

After the water pipe is blocked, it can be dredged by water pressure, chemical dredging method, tool dredging method, etc. Take the water pressure dredging method as an example, open the end of the pipe, increase the water pressure with a pressurized pump, and use the pressure to dredge it. Fill the pool with clean water, pour in an appropriate amount of white vinegar and stir, fully dilute, open the valve of the tap water, if it is still a little blocked, find a chopstick, take the facial tissue at home, take enough facial tissue paper to knead into a paper ball, place it in the water pipe, use chopsticks to reach into the water pipe, and wipe the inner wall of the water pipe with facial tissue.

Precautions for cleaning water pipes:

1. Close the main valve of the household water pipe, close the valve of wading electrical appliances, the toilet bowl, the water tower valve, and the water purifier valve.

2. Turn on a faucet at home that is lowest or closest to the water meter, use a bucket to connect the remaining water in the pipe, and then mix food-grade citric acid according to the remaining water connection.

3. Dissolve in 50-60 degrees of warm water according to the ratio of 1 kg of citric acid to 10 kg of water, try to dissolve citric acid in more warm water, and keep it for later use.

4. Soak in citric acid for half an hour, start cycle pulse cleaning, when cleaning, you need to open the filter screen on the faucet, and you need to open the faucet one by one, and then open the next faucet after the cleaning is completed.

5. After all the water pipes are cleaned, then the electrolytic tubes can be cut off from the machine, and all closed valves can be opened to restore their original state.

If the water pipe is blocked, then you look at which part, if it is in a public area, you will notify the waterworks to come over for maintenance, if it is the pipe blockage inside your home, then it is recommended that you find a plumber to help you fix it, or you can try to turn off the water valve first, and then open the valve at home to see if the water can flush out the sediment in the pipe, and then you can install the valve after it is flushed, so that it can be used normally.

To unclog water pipes, you can use the following methods:

1. Pressure dredging method.

Fill the clogged water pipe with water and apply high pressure to remove the blockage.

2. Chemical agent dredging method.

A chemical reaction between chemical reagents and blockages is used to unblock water mains. ......By adding a chemical agent to the clogged water pipe, it will cause a chemical reaction with the blockage to dissolve or soften the blockage, and the blockage can be removed.

3. Use tools to dredge. ......For example, using a wooden stick to poke out a blockage.

All three methods are feasible for water pipes that have not yet been installed in the pipeline. ......However, for water pipes that have been installed in the pipeline, it is necessary to analyze the method to use to clean up the blockage on a case-by-case basis. ......Since the water line is relatively closed, it is difficult to get the blockage out of the pipe, so the best way is to replace the blocked part of the pipe.

This not only clears the blockage of the pipeline, but also completely removes the blockage in the water pipe.

Can be used with waterway unclogging agents: Waterway unclogging agents are especially useful for clogging caused by hair, greasy, paper, etc. It is widely used in restaurants, hotels, homes, etc. for dredging vegetable sinks, basins, bathtubs, floor drains, and toilets.

Do not damage sewer pipes (including PVC pipes), do not damage the electroplating layer.

Tool dredging method: use professional pipes to dredge equipment.

Pressurized dredging method: open the end of the pipe and use a pressurized pump to increase the water pressure for dredging.

Surgical dredging method: Directly remove and replace this section of the pipeline when it is known which section of the pipeline is blocked.

Chemical dredging method: In the case that the pipeline is blocked by water alkali, soak it with food-grade citric acid and open the end to rinse.

First, dredge with special tools, second, dredge generic citric acid with chemical preparations, third, use pressurization method to increase the pressure of water for dredging, and fourth, you can cut off the blocked place with a new one.

Water pressure, chemical dredging, tool dredging and other methods can be used for dredging! If the pipeline is seriously blocked and difficult to deal with, it is recommended to find the blockage point, directly remove and replace this section of the pipeline!

Most of the blockages in the water pipelines are caused by the rust and scale in the water for too long, and this situation occurs most in the joints and turns.

If there is a snakeskin hose throughout the line, it is more likely.

This can't be dredged, unlike the sewer pipe with foreign objects falling into the blockage, and the blockage can only be replaced.

Use high-concentration vinegar and baking soda, first pour an appropriate amount of cooked baking soda into the drain, and then pour an appropriate amount of high-strength vinegar, and the soda powder and vinegar have a violent chemical reaction to remove grease and other sticky things in the pipes.

If the water pipe is blocked, it can only be replaced with a new pipe, if it is in your home, it needs to be replaced by yourself, if the public water pipe is outdoors, the water company needs to come forward to deal with it.

If the water pipe is blocked, you don't need to dredge it, just call the water supply company, and they will come to repair it, because you don't use water, and they can't collect the water bill.

You can move your arms, and if you have the conditions, you can move and turn your arms, and do gymnastics, which can relieve the pressure on your body and make you feel much better.

Sixth, if there are green plants indoors, you might as well look at the green plants to adjust your irritable mood, and the plants will have a fragrance, which can make people calm down quickly.

If the water pipe is blocked, you can call the waterworks or find a plumber to repair it, and everything will be solved.

The method of dredging the blockage of the tap water pipeline is generally to cut it in the middle for dredging, but first to find the place of dredging, otherwise it will be half the effort.

There is no way, only to increase the water pressure, or to pressurize the recoil from the water outlet

Clogged water pipes. You should find a water service worker. It's going to go smoothly. Fix it.

How to unblock tap water blockage? How to unblock tap water blockage? Tap water blockage should be reported for repair, and the water company has a professional master to repair it.

This can only be judged to be the contact or valve blocked, and then unloaded.

Tool: Pressure pipe unclogger.

Here's how:

1. Pour half of the sink hot water into the sink.

2. Place the pipe dredge at the sink outlet. If your sink is double-ended, use a cloth to block the unblocked outlet to make sure the pressure on the unblocked outlet is concentrated.

3. Repeatedly press the dredge vigorously and quickly. Then quickly lift the unclogger to see if the water is starting to drain away.

4. Continue to do this until the pipeline is dredged.

Hello! 1.First of all, we need to check the water pipeline, understand the circuit of the pipeline, and then determine the specific dredging and cleaning plan.

2.Before dredging, we should prepare our own three-way warm water, and dissolve one kilogram of food-grade citric acid for later use, and then connect the washing machine and the air compressor.

3.Turn the main inlet valve to the closed state, drain the water in the water main circuit in the home, then remove one of the faucets and connect the faucet to the cleaning equipment where we need to clean the water pipes, and prepare for cleaning. Put the dissolved citric acid into a bucket of water in the suction tube.

Then the leak test is carried out first, and then the liquid injection is cleaned.

4.Using the liquid injection function, a citric acid solution is injected into the household water pipe. Turn on each faucet in turn until the citric acid solution fills the water pipe. Let sit for about 20 minutes.

After a few minutes, the scale in the water pipe is almost softened, and the scale on the inner wall of the water pipe is pulse cleaned using the pulse function of the washing machine. Then open the main valve and flush until the faucet comes out of the clean water, that is, the cleaning is complete.

How to unclog a clogged water pipe: A good trick for clogging a water pipe.

Inject citric acid directly into the new machine with water to soften the dirt and dredge it.

After the water pipe is blocked, you can use dredging agent, water pressure and tools to dredge it, pour the pipe dredging agent into the water pipe, wait for the reaction to end, open the water pipe, drain the stain, or plug a thin pipe into the water pipe, open the faucet, use pressure to dredge it, and you can also use the pipe dredging equipment to remove the blockage.

You can plug the hose of the pump into the drain pipe and seal the drain.

Blocked water pipes can be dealt with by following these steps:

Close the inlet valve: Before dealing with the problem of clogged water pipes, you need to close the inlet valve first to prevent the water flow from continuing to impact the blockage.

Clean the faucet filter: If the faucet is slow or has impurities, you can remove the faucet filter first to clean it to see if it can solve the problem.

Clean the drain outlet: If the drain is blocked in the sink, bathtub, etc., you can use special detergents, needles, long brushes and other tools to clean it up. Be careful to remove the faucet or outlet lid for easy cleaning.

Use chemical agents to clean: If the above methods are ineffective, you can use a special pipe cleaner sold in the market and follow the instructions for use. However, it is necessary to carefully choose and strictly follow the usage methods and precautions in the instructions to avoid damage to the pipeline.

Seek professional help: If none of the above methods can solve the problem, it is recommended to seek the help of a professional, such as a plumber or pipe cleaning company, to solve the problem of pipe blockage more effectively.

It should be noted that when dealing with the problem of water pipe blockage, Shenchang should be judged to pay attention to safety measures to avoid causing harm to himself or equipment. At the same time, it is also necessary to comply with relevant laws, regulations and general standards to avoid unnecessary damage and pollution to the environment and public facilities.