How do you clean the pipes of water pipes?

What are the hazards of not cleaning water pipes?

Once installed, water pipes are not easy to replace, and generally have a long service life. Data surveys show that water pipes that have been in use for more than 5 years are polluted to varying degrees. In addition, due to the aging and rust of pipelines, the breeding of miscellaneous bacteria in the pipes, and the leakage of the pipe network, harmful bacteria, dirt, heavy metal ions, etc. will accumulate in the pipeline, and the water body will enter the user's home, endangering human health, causing liver and kidney damage, tumors, cancer and other diseases.

How do I clean it up?

Utilize professional water pipe cleaning equipment for cleaning. The cleaning effect of the new SE-830 is visible and powerful.

It is worth noting that many water pipe cleaners on the market produce copycat equipment in order to save costs. There is no patented technology, no quality assurance, and the technology is not up to standard, in the process of operation, it is easy to cause the water pipe burst in the customer's home due to equipment failure or improper operation.

The water pipes are all built-in, and the wall must be removed for repair after the pipe burst, which has a great impact!

What to do if the scale in the water pipe is seriously blocked.

Working procedures for cleaning water pipes.

Outdoor pipeline cleaning: connect the cleaning equipment at the water source, connect the sewage pipe at the end of the main line, close the separation valves of all branches along the line, and start the cleaning equipment for cleaning until it is cleaned. When cleaning branch lines, they can be cleaned separately, or they can be cleaned with branch lines using the main line.

If the line is too long, it can be cleaned in sections.

Indoor pipeline cleaning: connect the cleaning equipment at the separation valve of the outdoor entrance pipe, use the household's faucet as the sewage point, and clean it in different units until all users have finished cleaning.

The diluted citric acid can be poured into the water pipe for cleaning, which can not only quickly soften the scale, but also have the effect of sterilization and disinfection.

Household sewer cleaning should pay attention to the cleaning agent used, whether it is made yourself or store-bought, and the cleaning tools used should not be too sharp.

Although it can be used for cleaning, improper use may cause certain damage to the pipe, and even affect the service life of the pipe.

Precautions for cleaning tap water pipes:

1. Select the device connection location.

Hot and cold water triangle valve. close to the faucet of the water valve. The connection of the device should not be splashed with water.

2. Preparation before cleaning.

Look at the flow of water at each outlet. Check the water facilities and cut off the incoming water to avoid unnecessary damage caused by sewage entering the equipment during operation. Find the water filter, and then remove it, pay attention to be sure to take care of the removed equipment, so as not to lose it and affect subsequent use.

3. Device connection.

If you find that the output value keeps dropping during operation, you should check whether there is any water leakage, and then check whether the device connector is leaking.

4. Cleaning.

When operating, turn on the faucet first, then turn on the device, and turn off the faucet after the device stops. In addition, after the injection of citric acid, a certain pressure will be generated in the tube, and when the pressure is higher than the predetermined value of the equipment, it is necessary to open the faucet to relieve the pressure.

1.Tools & Equipment Used: Water Main Water Pipe Cleaning Machine, Citric Acid, Warm Water (60-80 degrees), Wrench, Pipe, Tee.

2.Water pipe cleaning method:

a.First of all, prepare about three buckets of warm water and dissolve about 1 kilogram of food-grade citric acid in one bucket.

b.Connect the washer and air compressor, close the main water inlet valve at the same time, and drain the remaining water in the pipeline at the same time. Remove the faucet, connect it to our water pipe washer and place the choke tube into the pipe dissolved in citric acid.

c.First, use the leak detection function to check whether the tubing is tightly connected. After testing that there is no problem with the pipeline, use the liquid injection function to inject the tap water line into the tap water pipe, soak it in the tap water pipe with citric acid solution for about 20 minutes before cleaning.

d.Turn on the faucet and turn on pulse cleaning. Use CACS pulses to remove the dirt and germs on the inner wall of the pipes, and clean the faucets of each water pipe in turn.

e.Finally, pulse with clean water until it flows out for cleaning.

f.After cleaning, clean and hygienic and tidy up the equipment.

The first step is to prepare buckets of water and put citric acid in the water to dissolve.

The second step is to close the main water valve in the home (usually installed under the kitchen sink) and the water inlet valve of the water heater. Connect the washing machine and the air compressor, close the main water inlet valve at the same time, close the toilet, water purifier, water heater, solar energy, washing machine and other related external devices, and drain the remaining water in the pipeline at the same time. Remove a short angle valve pipe, connect it to the upper water pipe cleaning machine, and put the suction tube into a bucket dissolved with citric acid.

The third step is to remove the angle valve closest to the main water valve, connect the pulse joint of the cleaning machine, put the suction head of the cleaning equipment into the pharmaceutical water, and turn on the faucet at the end of the home, and the faucet only needs to be opened a little bit. First, use the leak detection function to check whether the tubing is tightly connected. After testing that there is no problem with the pipeline, use the liquid injection function to inject the water pipe into the water pipe, soak the citric acid solution in the water pipe for about 30 minutes before cleaning.

The last step is to soak for half an hour, open the main water valve, turn on the air pump and equipment pulse to start scouring the inner wall of the pipe, and turn on each faucet in turn to clean, each group of flushing for about fifteen minutes. Cleaning hot water pipe equipment requires a water inlet, which needs to be connected to tap water or a water pump to pump water to complete the flushing work.

The above steps can be a good way to clean the water pipes in our home. You can try. Hope mine is helpful to you!

Water supply pipes are generally divided into outdoor (i.e., public water supply pipes)), and the domestic water supply pipes you say should refer to the indoor part. If you do need to disinfect, the commonly used and easy-to-buy disinfectants are: 84 disinfectant, bleaching powder (or tablets), chlorine dioxide disinfectant, etc., among which bleach powder (or tablets) is the simplest and easy; When disinfection, close the valve behind the water meter or the main pipe indoors and open the faucet or water applicator at the end of the pipeline you want to disinfect, add an appropriate amount of disinfectant to the pipe after opening the valve, then connect the pipe, slowly open the valve to evenly distribute the disinfectant to the pipe you want to disinfect, close the faucet or water applicator at the end, and soak for more than 2 hours.

Be sure to drain the remaining disinfectant in the pipes before use. Since the relevant work is more professional, it is recommended that you find a professional to guide or deal with it.

Individuals can't clean up.

It is recommended to deal with the water tank in the community accordingly, but the operation is more troublesome and needs to be inspected by the local health department.

If it is purely a personal application, a general water purifier or ultrafiltration membrane water purifier can avoid this kind of situation.

1.Understand the size of the house, the number of flats, the material of the water pipes.

First of all, we need to find the location of the main water valve in the house, which is usually placed at the bottom of the kitchen cabinet.

2.How the device connects to the home water pipes.

Under normal circumstances, there are hot and cold water pipes in the house, and we choose to connect them at the position of the angle valve with hot and cold water pipes.

3.Remove the filter of the faucet.

After the equipment is connected, we need to disassemble some of the filter systems and filters at the outlet of the faucet, so that when we do pulse cleaning, the dirt and dirt in the pipes will not block the filter.

4.Connectivity of the device.

The yellow pipe is the air compressor pipe, one end is connected to the air pressure inlet of the equipment, and the other end is connected to the air pump; There is also a transparent and thinner tube that is a suction tube, which is connected to the suction tube of the machine, and the other end is placed in a bucket soaked in citric acid; The blue pulse tube is connected to the pulse outlet of the machine at one end and the main water valve at the other end.

5.Configuration of cleaning agent concentration and temperature.

One kilogram of citric acid cleaner can be mixed with more than 15 kilograms of hot water, prepared according to the size of the house. Generally, a kitchen, a bathroom and a balcony need to prepare more than 15 kg of hot water, and those with hot and cold water pipes need to prepare about 20 kg. Once the hot water is ready, the main water valve can be closed and pumped into the pipe through the suction pipe.

Faucet filters, showers, and all electrical appliances (water heaters, solar energy, water purifiers, washing machines, toilets, etc.) that connect to water should be closed and the water source should be disconnected.

6.Perform side leaks on household pipes.

After connecting the device, we do the side drain, put the transparent suction tube into the clean water to draw the liquid, press the side drain button, and now make sure that all the faucets are closed. Always pay attention to the output pressure gauge of the equipment, the pressure rises, and it will automatically stop when it arrives. If the pressure value does not drop, it means that the pipe is sealed and there is no water leakage.

7.Soak in cleaning agent.

Soak citric acid in hot water, stir well and start pumping. When we are done, make sure that all the faucets have a flow of cleaning agent. Let the detergent soak in the faucet for 15-30 minutes.

8.Pulse cleaning with detergent.

After the cleaning and soaking is completed, we start to pulse, we first open one-third of the main water valve, and then pulse, and flush out all the citric acid and dirt, there is a foul, sour smell. After the clean water is discharged, we open the main valve and clean each faucet with clean water, then our cleaning process is over.

9.Maintenance of equipment and resetting of water pipes.

Now we have flushed all the pipes in the house, every faucet has been cleaned, now we start to put away the equipment, we must put back all the things we have moved, and at the same time our equipment has to do some maintenance, because we have just used the cleaning liquid through the equipment, pumped into the pipe, the equipment is now there are some residual cleaning agent residues, we prepare a bucket of water, according to the pumping function, with clean water through the equipment.

Remove the angle valve closest to the main water valve and connect the pulse fitting of the washing machine. Put the suction head of the cleaning equipment into the cleaning agent, open the water dragon bucket at the end of the house, and soak it for about half an hour. Then turn on the faucet, rinse the dirt and germs on the inner wall of the water pipe repeatedly, and clean the faucet of each water pipe by land.

1. Remove the angle valve closest to the main water valve and connect the pulse joint of the cleaning machine.

2. Put the suction head of the cleaning equipment into the cleaning agent, open the wild faucet at the end of the house, and soak for about half an hour.

3. Then turn on the faucet, repeatedly rinse the dirt and germs on the inner wall of the water pipe, and clean the faucet of each water pipe.

How to clean water pipes:

1. Remove the angle valve closest to the main water valve and connect the pulse joint of the cleaning machine.

2. Put the suction head of the cleaning equipment into the cleaning agent, open the faucet at the end of the house, and soak for about half an hour.

3. Then turn on the faucet, repeatedly rinse the dirt germs on the inner wall of the water pipe, and clean the faucet of each water pipe.

4. In this way, the cleaning is completed, and the water becomes clear.

In renovation, waterproofing is often more important than any other topic. Things to pay attention to during the installation and use of pipelines:

1. Be sure to find a professional technician to install the pipeline. No matter how luxurious and high-end your decoration is, it will not be worth it if you are not willing to spend money in this area. Often, the burst or leakage of the pipeline will cause the loss of the water pipe itself dozens of times, hundreds of times, or even thousands of times.

2. Be sure to carry out a pressurization test after installation. The pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test.

3. Test method under no pressurized conditions:

1) Close the main valve of the water pipe. (i.e. the water pipe switch in front of the water meter).

2) Turn on the faucet in the room for 20 minutes, making sure there is no more water dripping and then turn off all the faucets.

3) Turn off the water inlet switch of toilet tanks and washing machines with water storage function.

3) Open the main valve of the water pipe.

4) Check whether the water meter is moving, including slow walking, 20 minutes after opening the main valve.

If there is movement, it is a water leak. If you don't move, you're fine.

4. In daily use, if the following situations are found, check the relevant pipelines as soon as possible

1) The surface of the wall paint is moldy and blistered.

2) Blackening of baseboards or wooden floors and fine bubbles on the surface.

In the first step, prepare bottled water and dissolve citric acid in the water.

The second step is to close the main water valve in your home (usually installed under the kitchen sink) and the water inlet valve of the water heater. Connect the washing machine and the air compressor, close the main water inlet valve at the same time, turn off the toilet, water purifier, water heater, solar energy, washing machine and other related external equipment, and drain the remaining water in the pipe at the same time. Remove one of the short tubes from the angle valve, connect to the water supply cleaner, and place the straw in a bucket dissolved with citric acid.

The third step is to remove the angle valve closest to the main water valve, connect the pulse joint of the cleaning machine, put the suction head of the cleaning equipment into the solution, and turn on the faucet at the end of the house. The faucet only needs to be turned on a little bit. First, use the leak detection function to check if the pipes are tightly connected.

After detecting that there is no problem with the pipe, use the liquid injection function to inject the water pipe into the water pipe, soak it in the water pipe with the solution of citric acid for about 30 minutes before cleaning.

The last step is to soak for half an hour, open the main water valve, open the air pump and equipment pulse to start flushing the inner wall of the pipe, and open each faucet in turn for cleaning, each group of cleaning for about 15 minutes. Cleaning hot water pipe equipment requires a water inlet, which needs to be connected to tap water or a pump to pump water to complete the cleaning job.

The above steps can be a good way to clean the water pipes in our home.