Is the violin good wooden or pure white kind, beginner

Pure white is purely for performances or photo shoots, if you are a beginner, there is no need to use white at all. And the practicality is not high.

It is recommended for beginners to buy branded violins, and lark's violins are economical and practical for beginners.

I like pure white" "Grip the claw, also a beginner.

Of course, it's wooden!

It doesn't make a difference, it's all right.

The best material for making violins is white pine for the panel, which requires clear texture and uniform texture; The back plate and headstock are made of maple wood, mainly including maple and color wood, and the wood should be rented with tiger skin patterns.

It can only be said that it varies from person to person, because even if it is the same material, it is not the same in the hands of different people, but according to consumer feedback, it is better to use spruce material for the panel compared to Fighting, and it is straight and uniform with a spacing of about 2mm. Because the silver limbs are too wide or too narrow, or the difference in width is too great, it is impossible to make a good sound.

Panel: To use fish scale spruce. The texture of the high-grade violin should be upright, dense and even, and the fibrous tissue must be compact, soft and elastic, and no scars, resin sacs and patches are allowed.

The number of annual rings in the middle of the fish scale spruce panel is preferably 5-8 grids per centimeter, the widest width of the edge annual rings is not more than 3 mm, and the change in the width of the annual rings should not be greater than 2 mm in the range of 20 mm in the adjacent connection, and the change in the width of the annual rings of the whole panel should not be greater than 2 mm.

The selection criteria should be the same as the panel, with healthy wood, the important thing is whether the tree is old, whether the width of the grain is uniform, the material is healthy, the color is uniform, and the natural drying time is long enough.

The sides, headstock and horses are made of the same wood as the back.

The best material for violins is mainly Italian tops, which are made of fish scale spruce. The characteristics are as follows: 1. The texture of the high-grade piano should be upright, dense and uniform, and the fibrous tissue must be tight, soft and elastic, and no scars, resin sacs and repairs are allowed.

2. The number of annual rings in the middle of the fish scale spruce panel is preferably 5-8 blocks per centimeter, and the widest annual rings at the edge are not more than 3 mm ,..

1. Whether there is a sound box or not.

Electric violin: There is no need for a resonance box, because the vibration of the strings is picked up by a few magnetic pickups (like an electric guitar) under the root of the strings, which are then amplified by the sound. Headphones can also be used so that you can practice without disturbing others.

The electric tint can be pulled without plugging in, and the sound is very small, like a mosquito calling.

Violin: It is necessary to have a sound box, and the bass beam is glued to the lower left of the panel, which not only plays a reinforcing role, but also has an acoustic role. When the bow and the string are rubbed to make the string vibrate, the panel vibrates through the horse, and the back plate vibrates through the sound column, the E string vibrates less, and the G string vibrates more, so that the bass beam has greater vibration and causes the resonance box to vibrate.

2. The sounder is different.

The sound principle of ordinary violin: the bow first rubs the string, the string vibrates due to friction, and this vibration will be transmitted to the bridge, and the bridge will send a wide width and then transmit the vibration to the panel, at this time, the vibration of the panel will make the air in the violin also vibrate, and the vibrating air is usually loud because it has been bumping around inside.

Electronic violin: There is no speaker, so when the sound is transmitted from the bridge, there is no panel to vibrate, but an electronic part, called a pickup, to sense the vibration of the bridge, and the pickup will sense what it senses, through the wire to the horn, and then make a sound. Since there was no time to go and the sails were bumping around in the closed box, the sound was very quiet.

3. The sound quality is different.

The relationship between the wood, the vibration of the air in the wood, and the beautiful sound emitted by the electronic horn cannot be done, so the performance of the ** will usually be based on ordinary violins.