How to distinguish the secondary ceiling of the integrated ceiling The construction steps of the sec

The integrated ceiling secondary ceiling has one more level than the primary chandelier, so the installation is slightly more complicated, and the position of the ceiling will be larger. It is more suitable for the installation of houses with higher height space at home, if the height of the house is not enough, the installation of secondary ceilings will make the space lower, so that life will be more uncomfortable and make people feel depressed. There are many styles of secondary ceilings, including modern, European, Chinese, etc., breaking the unchanged white of gypsum board to meet different home decoration needs.

Integrated Ceiling Secondary Ceiling Construction Steps.

1. First of all, determine the installation form of the secondary ceiling, and the form is determined according to the owner's preference. There are two main types of integrated ceilings, concave mode and convex mode. After the form is selected, the keel can be installed, and the arrangement and the gap between the top and bottom must be paid attention to when installing the keel.

2. The purchased keel can be fixed in size, and the size can be cut and different shapes according to the needs, and the frame can also be trimmed in different forms. The keel connection must be made with an L-shaped fitting, and then the screws must be tightened, so that the keel is installed.

3. After installing the keel, there is only one last step left, to install the required lamps. After installation, you can install the lower layer, and the installation of the lower layer is very simple and convenient.

Integrated ceiling is the name of the material, which is mainly used for kitchen and bathroom aluminum material ceiling. The secondary ceiling refers to the shape of the ceiling, which is the shape of the ceiling with two levels.

Secondary ceiling installation method:

1. Materials and tools needed:

Before installation, you need to prepare the required tools, such as electric turning, glass guns, hammers, ink fountains, scissors, tape measure levels, special suction cup tools for suspended ceilings, and some auxiliary materials, such as screw bars, light steel keels, glue, etc.

2. Predetermined mode.

According to the preference of the householder, choose the shape of the secondary ceiling installation, whether it is concave or convex downward, if you don't like the conventional square ceiling, you can also choose other shapes to shape. According to the selected shape to determine the arrangement and height difference of the keel, the straight type is similar to the traditional installation, and the arc or L-shaped one is more difficult.

3. The keel size is fixed.

In order to make different shapes, the size of the keel should be cut in different sizes, each shape has its specific requirements, after cutting, the keel should be fixed, and they should be connected with L-shaped connectors and tightened and fixed with screws, and the installation of the keel is completed.

4. Pay attention to the height of the ceiling.

The hanging height of the secondary ceiling is generally about 20cm, if the floor where the head of the household is relatively high, the thickness of each level can be appropriately increased, if the floor is several floors below, the thickness of each level can not be too high, generally reduce 2.3cm, otherwise the lamp and other equipment can not be installed.

5. Make reservations.

After the ceiling is installed, it is necessary to reserve a good hole, regretting that this is to give the position of the electrical tooling circuit and the light strip, especially to reserve the air conditioning outlet, and the place where the curtain box is hung needs to be hung in advance.

6. Installation of gusset lamps and lanterns.

Finally, the gusset lamps and lanterns can be installed to do the lower installation, the lower installation is relatively simple, is a conventional method.