-
Wait a minute. There are also most of the education network **, such as the university's BBS, FTP, etc.
-
yes, I also use Netcom.
-
Good telecommunications
My house is Netcom 720 years old and very broken
-
If you're a student, you can do the kind of student who can do Netcom**.
495 a year, no time limit for winter and summer vacations, 20 hours per month for other months.
-
This student travels all the way. It's rubbish.
Don't pretend to be this.
I'm thinking about changing it now.
-
Telecom, Netcom monthly subscription, is authentic Internet access is not restricted.
-
It's best not to choose Tietong. It's painful when you're not crying. Now the wise choice is Netcom, and there are discounts, accounting for only more than 50 fast per month.
-
Telecom Netcom Tietong several are very good.
-
IP address, DNS look at your sister's, and her settings are the same, and the last digit of IP is different
-
The firewall is off, and there's the problem with 360, and the fact that 360 is uninstalled.
-
It can be caused by:
1. It may be due to the wrong password input or a problem with the connection, you can right-click on the wireless network and then select Forgot the network and enter the correct password to reconnect to try it out.
2. It may be that the network you are connected to has no Internet connection, and the reason for this situation may be that the wireless router you are connected to is not connected to the network itself, or because the relevant network parameters of the router are not configured.
3. It may be that the router you are connected to has set relevant rules. Restrict your computer's network connection, at this time you can visit the background of your router to see the relevant settings, contact restrictions.
-
No... Is there an exclamation point on the small TV in the lower right corner of the computer? Generally, there are restrictions that you can't access the Internet, and there are many reasons why you can't access the Internet,。。
Generally, free Wi-Fi access needs to be set to the IP to be obtained automatically. Just set the wireless connection to automatically get the IP...
-
According to what I said, I will summarize a few solutions for you to land raid Li, I hope to help you.
There are many ways to restrict LAN computers from connecting to the Internet (WAN).
Password: admin
Enter the router -- Anyuan settings -- IP address filtering -- check if there is an IP address in the IP address filter list if there is an IP address of your electricity sooner or later, if so, please delete this IP and it's OK.
address...The computer is using an IP address.
subnet
mask...The subnet mask of the computer.
default
gateway...The gateway to the PC.
dnsservers...The address of the computer's DNS server.
2.MAC address filtering of the router. The MAC address of the computer is filtered out by the router.
The MAC address filtering feature of the router can prevent any computer on the LAN from accessing the WAN. Solution: Log in to the router -- Security Settings -- MAC address filtering -- check if there is your MAC address in the list -- delete this MAC address if so.
allphysical
address...The MAC address of the computer is in Zen.
Mac: Simply put, it is the ID card of the network card, this address is unique in the world, it is separated by 12 hexadecimal numbers, and every 2 hexadecimal numbers are separated by colons, such as 08:00:
20:0a:8c:
6D is a MAC address.
-
Analysis: Listen to the landlord say this, I think there is no problem with your network, about you said that you are always restricted by the landlord, I pointed out one point, he can limit the lead, but can only limit the traffic in the route, or limit the IP Internet, but he is the landlord, there must be more than one or two users who access the Internet, so he will not limit the IP Internet. Looking at the question you asked, I guess that your IP address is automatically obtained, and you can't access the Internet because you can't get the IP address assigned in time, and the two little question marks you mentioned are exactly the same.
Solution: Set the IP as a fixed IP, consult the IP address of the landlord's router, set this IP address as the gateway, and then set the correct local DNS, different regions, DNS is also different, this landlord will tell you, generally, it may also be other rotten, you can solve your current problem, hehe, don't forget to set it for me.
-
The one on the first floor made me laugh to death. Say so much, if the landlord is a network administrator, still ask this question? Look at the problem clearly, ok?
The landlord's network is not completely blocked by the rental book, but the speed is limited.
I don't know what grade your company's network environment and equipment are:
If it's limited by high-end hardware, you can't do anything about it on the client;
You change your IP to your father's (gateway, DNS, etc. should also be set to the same), tell your father's Ben to rest for a while, see if you can connect successfully, if it is successful, then you change the last digit of the IP to be non-0,1,255 to try. If it doesn't work, then you can change your dad's IP, and if he can't connect, I guess you're really embarrassed, and it may be that the MAC is bound. If your dad's kerosene fixed IP then the problem can only be in your place, disable the connection and then enable it, plus the connection diagnosis that comes with Windows, it should be able to solve.
If you don't have a password, others can use it, and you will be able to grab the Internet speed.
It's very simple, just set the IP for the local connection.
The built-in DHCP server of the wireless AP device is dynamically assigned to the IP address of the wireless LAN workstation in the default state, and its effective lease time is 2 hours, once the IP address of the workstation is used for more than 2 hours, and can not get the renewal reply from the DHCP server in time, the wireless workstation will naturally be regularly disconnected after working for about 2 hours. >>>More
If Error 822 is displayed for broadband Internet access, it means that Network Access Protection (NAP) forces the client to become unresponsive. Some network services or resources may not be available. If the problem persists, disconnect, retry the remote access connection, or contact the administrator of the remote access server.