Why should the wireless network have a password, and what should I do if the wireless network needs

If you don't have a password, others can use it, and you will be able to grab the Internet speed.

Dear users, hello.

Hope the following can be helpful to you:

If you don't set a password, anyone can connect directly, which will take up your broadband bandwidth and affect your own use.

Anhui Telecom will serve you wholeheartedly.

<> device has set permissions, and you need to use the account password to access the Internet.

Wi-Fi networks that require web authentication can:

1. Select WiFi connection.

2. The web page that needs to be verified will pop up, and enter the mobile phone number.

3. The mobile phone will receive a multi-digit verification code SMS.

4. Enter the verification code into the verification code box on the verification page.

5. You can make sure that you can click on the empty Wang, and don't connect the chain Ling at will. to prevent information from being leaked.

Meaning that the connection to wifi requires verification, which is set in the router, as follows:

1. First of all, enter the IP address in the browser, then enter the username and password to log in to the router background, as shown in the figure below, and then enter the next step of the town.

2. Secondly, after completing the above steps, click on the wireless network option as shown in the image below and proceed to the next step.

3. Then, after completing the above steps, find the WPA password settings, fill in the new password, click the "Apply" button, as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, or click on the authentication mode, change to "open", no secret is required, as shown in the image below, and then proceed to the next step.

5. Finally, after completing the above steps, click the "Apply" button to save, Yupai Jujube can be connected to WiFi without a password, but it needs to be verified, and it is set up in this place, as shown in the figure below.

WPS, or WiFi Protection Settings, is designed to simplify the security and encryption configuration of wireless networks and enable fast connections to wireless networks. This feature is not much in real use, mainly because people are not familiar with this technology. In fact, this technology can achieve a fast connection to a wireless network without the need for cumbersome wireless password entry.

Mode 1: PBC, which is the easiest to use. All you need is your little thumb to press so lightly on the router to quickly connect.

Why do some people press the WPS button but the connection is not successful? The reason for this is an error. Just pressing the wps button won't work.

A WPS connection request will also need to be initiated from the phone. There is no order between pressing the WPS key and initiating a WPS request from the phone. So you don't have to worry about which operation to do first.

The first connection may fail, so you can restart the router and try again.

Mode 2: Client Pin, which is honestly not recommended. This connection is made by the client giving the PIN code, and then entering the router to fill in the PIN code to achieve the connection.

Therefore, it is very inconvenient to operate, but it is much safer than PBC. However, WPS itself exists to achieve fast connections, and if convenience is sacrificed for security, it is contrary to the original purpose of WPS.

Mode 3: AP PIN, the router gives the PIN code, and the mobile phone fills in the PIN code to connect. It's both safe and convenient. However, there are some mobile phones that do not currently support AP PIN. This point should be paid special attention to.

At present, it is sufficient to use PBC for households and businesses in general.

Simple router settings, wifi password settings, wireless network settings.