The gas meter battery has been replaced, and the meter shows that there is gas, why can t the stove

1. The gas transmission pipeline problem leads to no gas.

1. Gas pipeline network outage.

As a pipeline gas user, the gas we use is delivered to us by the gas pipeline network, and if there is emergency repair work in the gas pipeline network, the gas may be shut down. If the gas pipeline network is shut down, that is, no matter how much balance is left in our gas meter, we can't use it.

2. The gas valve at home is closed.

In the homes of pipeline gas users, there are generally at least three valves in front of the meter (main valve), emergency shut-off valve, and front of the stove valve, and any one of these valves will be closed to prevent the transmission and circulation of gas. Then, naturally, there will be no gas delivered to the gas stove, and the meter will not go.

3. The gas hose is bent.

In our home and the gas stove connection, there will always be a gas hose, if the gas hose due to external force bending, even if the valve opens, may not be gas, this situation will also lead to the meter does not go word, the gas stove is out of gas, which has nothing to do with whether the table has gas.

Second, the gas meter problem.

1. The gas meter is automatically locked.

At present, some gas meters are equipped with automatic locking function, that is, when we do not use gas for a long time, the gas meter will automatically lock if the gas meter does not detect the air flow passing through for a long time, that is, its internal solenoid valve will automatically close, so as to prevent accidental leakage of gas. If the gas is automatically locked, we can still see that the gas meter has a balance display, but when we use the stove, it cannot be ignited, and the gas meter will not be worded.

2. The battery power of the gas meter is low, and the lock valve is low.

Most of the current smart gas meters.

When the battery is low, it may cause the solenoid valve to be opened after being cut off, but the word of the gas meter is displayed, that is, there is a balance display, in this case, the gas will not be delivered to the gas stove.

If the water heater and the gas stove can't be turned on, it is likely that the gas meter is out of gas, you can first turn off the valve behind the meter, unplug the hose, and then open the valve to see if the gas meter is supplying, if the gas is supplied, then the problem is the stove and the water heater, look down in order; If there is no gas supply, then you need to replace the gas meter battery, or re-swipe the card to try. Because the gas meter will lock the solenoid valve at every turn, it will be good to re-magnetize it with the IC card, if the above methods cannot solve this problem, you can only find someone from the gas company to check and repair. There was gas, but neither the water heater nor the gas could be used because the gas valve was not opened.

Generally, it takes 1-2 minutes for the air valve to open (some gas meters have a red self-closing valve, check whether it is misoperated), in addition, if there is a main valve installed, check whether the main valve is closed.

Why does the gas stove not work after the gas meter has no power and the battery is replaced?

Hello Kiss is happy to answer this question for you. Why does the gas stove not work after replacing the battery after the gas meter has no electricity, and there is no gas in the gas stove; 2. Poor circuit contact in the gas stove; 3. Internal failure of ignition device; 4. Gas stove gas circuit system failure. 1. There is no gas in the gas stove When the gas stove cannot be ignited, the first thing to consider is whether the gas source is sufficient.

If there is no gas, there will be no spark when the switch is turned on. There are several possibilities for this to happen, and it is possible that the gas pipeline is clogged and the gas cannot be reached. There is also a possibility that because of an emergency, the gas company closed the natural gas ** valve.

At this time, we can first check the gas excitation meter to see if it is in normal working condition. If it shows that it is not in normal working condition, you can call a staff member to come for repair. 2. If the gas and electricity are both available, if the ignition is still not successful, you can check the internal circuits and whether the two poles of the battery box are rusty and have poor contact.

This is because the inside of the gas stove often has some circuits, which are easy to cause poor contact under long-term oxidation. In this case, it is only necessary to remove the rust and eliminate the poorly touched parts, and then it can be reused. 3. The internal fault of the ignition device is divided into two types: electric pulse ignition and piezoelectric ceramic impact ignition, if there is a discharge spark in the gas stove during ignition, it indicates that the ignition part is normal.

But if there is no spark from the discharge, it is a sign that the ignition of the gas stove is malfunctioning. If such a problem occurs, it is necessary to seek help from professional maintenance personnel. 4. If the gas circuit system of the gas stove is faulty, the spark is normal but cannot be ignited when the gas stove is ignited, and it is possible that the ignition head is blocked, and the combustible gas cannot be sprayed out, so the ignition failure of the gas stove is caused.

The main reason for this is that piezoelectric ceramic impact ignition devices are commonly used in old gas stoves, and there is only a small hole in the gas system for gas to flow out. If this is the case, it is necessary to unblock the vent to restore the health of the gas stove.

<> dear, I've been waiting for a long time, the following is the answer to your question, I hope it can help you!

Dear, hello, there is no gas when the gas meter starts after changing the battery because the gas meter does not open the valve after changing the battery. When you replace it, because the old battery is removed, the gas meter will automatically close the valve when there is no power, and the battery will not be automatically opened if you reinstall the battery, you need to reinsert it with a recharge card, the gas meter will restart and open the door valve, if the card is not moving, then check whether the battery is installed correctly, and whether the battery is counterfeit. Generally, the flameout and the battery have little to do with the process of use, first of all, see if you have the same phenomenon upstairs and downstairs neighbors, if not, you can rule out the gas outage maintenance.

However, this gas outage is generally notified, and it usually does not stop suddenly. Then determine whether the stove is normal gas output, press and hold the switch to listen to the sound, if there is a gas sound, you can determine that the stove is basically normal. Then replace the battery, which you did but still can't ignite, so if it's not the first case, it should basically be the second step, the stove problem.

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

The gas meter battery has been replaced, and the meter shows that there is gas, why can't the stove and water heater be turned on when there is no gas?

Hello, dear, I am happy to answer for you: if the water heater and the gas stove are not working, it is likely that the gas meter is not gas, you can first close the valve behind the meter, unplug the hose, and then open the valve to see if the gas meter is supplied with gas, if the gas supply, then the problem of clearing and closing the ear is in the stove and water heater, look down in order; If there is no gas supply, then you need to replace the gas meter battery, or re-swipe the card to try. Because the gas meter will lock the solenoid valve at every turn, it will be good to re-magnetize it with the IC card, if the above state Wang Law can not solve this problem, you can only find someone from the gas company to check and repair.