How many degrees of gas saving is set for the wall hung boiler? What are the precautions when using

The choice of natural gas wall-hung boiler must be the most reliable, reliable product design, mature product design, and strictly tested before leaving the factory and going on sale, including its material! When purchasing, it should be noted that it is a product of Xinyi reliable manufacturer, so it is not as cost-effective to install a natural gas wall-hung boiler as using water heating. In fact, there are many communities that do not have water heating and heating, only natural gas, and there is no way to use natural gas wall-hung boilers.

<> wall-hung boiler has two modes of heating and hot water, the heating and hot water functions are turned on at the same time in winter, and the heating mode is turned off in summer, and only the hot water is turned on to achieve the effect of energy saving. First of all, see whether the installation and fixation of the wall-hung boiler are firm. There are no flammable and explosive items and corrosive things around the wall-hung furnace.

2.In use, it is necessary to keep the indoor ventilation with air, because the wall-hung furnace needs oxygen to burn in the combustion. When the wall-hung furnace is running, the air in the system will be continuously discharged from the exhaust valve, and the water pressure will drop; Secondly, when the heating is running, the temperature of the heating water rises, and the water pressure will increase due to the relationship between thermal expansion and cold contraction.

It is necessary to check each pipe joint frequently, whether there is any leakage of natural gas, whether the heat of the plumbing pipe is normal, and clean the filter screen frequently to prevent blockage. Safety comes first, first check each connection to see if there is any air leakage, the simple way to detect it is to use soapy water and dish soap solution, never use an open flame. Although the average temperature in winter in the Yangtze River basin is higher than that of northern cities, because the climatic conditions of almost all cities in the Yangtze River basin are relatively high humidity, although the ambient temperature in winter is higher than that of northern cities, the human body feels very cold.

It is necessary to check each pipe joint frequently, whether there is any leakage of natural gas, whether the heat of the plumbing pipe is normal, and clean the filter screen frequently to prevent blockage. Heating is flexible. Not limited by the central heating time, the heating time can be set freely, can be turned on at any time, the start time can be preset, life is more comfortable, and the temperature of each room can be adjusted at will within a certain range.

Set about 60 degrees on it, this temperature is not only suitable for indoor temperature but also will not be too high to affect the wall-hung boiler, pay attention to plug in the power supply first, then set the temperature, and then turn on the temperature switch.

Generally speaking, every degree higher the temperature will consume 5% more, and it is best to set the temperature to about 20 degrees Celsius. When using, reduce the number of times the faucet is opened and closed, turn down the valve heater in the uninhabited room, and do not easily turn off the wall-hung boiler.

When setting 28 degrees, it is the most energy-saving, so when in use, you must keep the indoor ventilation, always check whether there is air leakage in the joints of each pipe, clean the filter frequently, and put safety in the first place, and it is best to do regular inspections.

It is more economical to set the temperature of the outlet water of the gas wall-hung boiler at 40 degrees to 60 degrees.

Users who do not have a wall-hung boiler thermostat need to adjust the wall-hung boiler according to the actual situation of the room to control the water temperature of the floor heating or radiator and other heat dissipation terminals, usually the water temperature of the floor heating is set to 40 degrees Celsius to 50 degrees Celsius, and the radiator water temperature is set to 50 degrees Celsius to 60 degrees Celsius.

For users who are equipped with a wall-hung boiler thermostat, they can be set directly on the thermostat, and the human body feels the most comfortable when the room temperature is kept at about 18 22, and when the room temperature is lower than 15, it will produce a significant cold feeling. People don't need too high a temperature to sleep at night, because during sleep, the body's metabolism decreases to a very low level. Therefore, for the sake of energy saving, it is recommended that you adjust the indoor temperature to about 15 when you sleep.

Natural gas can be saved by setting the water temperature to a constant temperature, for example by setting the water temperature between 35 and 40.

Don't always turn on the wall-hung stove to burn, because the hot water dissipates slowly, you can boil the water intermittently, for example, you can boil it for three or four hours in the morning, and then turn it off, the indoor temperature can be maintained for a few hours, and then it will be burned for a few hours at three or four o'clock in the afternoon, and it will be turned off when you sleep, so that the indoor temperature can also be maintained until the morning.

Try to turn off the radiators in bedrooms that you don't frequent. When in use, it can be connected to an external indoor temperature controller to achieve personalized temperature regulation and achieve the purpose of energy saving, according to statistics, the use of indoor temperature controller can save 20% 28 gas costs.

The wall-hung boiler is adjusted to 45 degrees Celsius to save gas than 55 degrees. But this is said on the premise of the same wall-hung boiler, in fact, the wall-hung boiler is not correct in terms of temperature to save gas and gas, for example, the wall-hung boiler with good energy efficiency is fully combusted, and the thermal efficiency is high, which will save gas. If the boiler is not good, the combustion is not sufficient, and the thermal efficiency is low, it will definitely cost gas.

If you want to keep the indoor temperature well, you should not only pay attention to the temperature setting, but also consider the thermal insulation performance of the houseIf the insulation effect is not good, so many good wall-hung boilers are not good, some experts have done experiments, if the windows are equipped with double glazing can save 20% of energy, if thick curtains are added to the doors and windows, and 5% to 10% of the energy can be saved, then this can save a lot of gas.

The wall-hung boiler should not only choose the high energy efficiency, but also consider the user's house areaIt is also necessary to consider the living habits of people who actually use wall-hung boilers, such as a single house is large, so turn off the valves in some rooms or turn them off, which not only makes the temperature at home rise rapidly but also saves gas. There are also different requirements for temperature for everyone, some people feel that the indoor temperature is high to be comfortable, but some people are afraid of heat and feel too hot and uncomfortable, so they must adjust the temperature according to their own needs.

The wall-hung boiler also has a trick in temperature setting, if it is an office worker, before going out, adjust the heating temperature adjustment knob of the wall-hung boiler to "0" gear, at this time the wall-hung boiler is in an anti-freezing state, the water temperature in the heating is kept between 35-40 degrees, and the overall space temperature in the room is about 8-14 degrees. Some people think that it is the most gas-saving to turn it off before going out, and then turn it on when you go home, in fact, this is not only bad for the boiler, in fact, it is expensive to do so, and now the wall-hung boilers are energy-saving, once the temperature is reached, the wall-hung boiler is not workingTherefore, the most ideal is to adjust the operating temperature of the wall-hung boiler to a low temperature operating state, and then adjust it to the required temperature after returning home.

There is no constant standard for this, it is set according to the temperature you need, the floor heating is 45-60 degrees to see the operation, the radiator depends on how much you install, and the temperature is between 60-85. If the water temperature is high, the room temperature will be high, so if you want to save gas, turn it down.

First of all, increase the room temperature to 20 degrees, then adjust the water temperature to 55 degrees to maintain the operation, observe the rise and fall of room temperature, find the equilibrium temperature of heating, the weather is different, the water temperature is also different, adjust in time. The principle of heating is that it runs at low temperatures for a long time. The general heating season is adjusted between 50-65.

The weather-hung boiler is adjusted to 40 degrees. Will it automatically stop firing when the temperature stops?

It's useful to do your own research.

15 degrees is more economical.

The temperature difference of the wall-hung boiler is generally set at 15 degrees, so that the wall-hung boiler will not start working frequently, because this temperature difference can also play a good role in heat preservation and warmth.

In our real life, more and more families choose to use wall-hung boilers as a heating method, because using wall-hung boilers for heating is more energy-efficient and cost-effective than using electricity for heating. It is best to control the temperature of the wall-hung boiler between 15 degrees and 20 degrees, which is the most economical and gas-saving.

The gas wall-hung boiler has a strong home heating function, which can meet the heating needs of multi-bedrooms, and each room can be set at will according to the needs of the comfortable temperature, and can also decide to turn off the heating in a room separately according to the needs, and can provide a large flow of constant temperature sanitary hot water, which is used in family bathing, kitchen and other places, which is economical and practical.

When the ignition switch of the wall-hung boiler enters the working state, the fan starts first to form a negative pressure difference in the combustion chamber, the wind pressure switch sends the command to the water pump, and after the pump starts, the water flow switch sends the command to the high-pressure discharger, and the command is sent to the gas proportional valve after starting, and the gas proportional valve starts to start.

The gas proportional valve and the wind pressure switch and the flue gas induction switch are interlocked, the combustion chamber has a certain negative pressure gas, the proportional valve can work, when the flue gas induction switch can not detect the exhaust gas discharge in 5 seconds, the gas proportional valve will be cut off to stop the gas supply, so as to ensure the safe use of gas.