What should I do if the gas meter is not ventilated? What is the reason why the gas meter is not gas

1. First of all, you can see whether there is an abnormality on the gas LCD display, and then check the manual according to the abnormality** for troubleshooting;

2. Secondly, check whether the battery has electricity, and replace the battery on the gas meter if it is out of power;

3. Again, check if you owe the gas bill, insert the IC card, and see if the gas meter is open.

Hello, glad to answer your gas meter.

The inability to ventilate may be due to a bend in the gas connection, in which case it is sufficient to align the pipe.

If the connecting pipe is not bent, it may be caused by gas exhaustion, you can check whether there is a zero sign on the gas meter display, if there is, it means that the gas is exhausted, in this case, you only need to buy gas.

It is also possible that the riser valve is closed, in a sense, the main pipe of the householder has an indoor filter valve, which is generally on the first floor, and in some cases on the second floor.

We can contact the gas company for repair, it is best not to repair at home, the gas company maintenance personnel will go to investigate and confirm that there is no air pressure, and then we will open the riser valve.

1.The treatment method of gas meter does not produce gas can first check whether the gas supply is normal. Then check down: if it is the oldest desktop stove, piezoelectric ignition, it is not excluded that the valve core or nozzle may be blocked.

2.If there is no foundation for stove repair, the repair of the gas meter may require the involvement of professionals. If it is a built-in stove with pulse ignition and flame-out protection, first check whether the battery is charged, or replace the battery directly and try again.

3.Turn on the switch knob to see if there is gas, if there is gas out, it means that the flame-out protection device is broken. If there is no gas discharge, the air valve is blocked, and there are many reasons for the blockage, which needs to be professionally repaired.

The gas meter can be started normally after the battery is replaced, and the method is as follows:

Now the new wireless gas meter, you can pay online, no need to read the meter, when there is no gas, first determine whether the line is unblocked, in fact, to determine whether the community is out of supply, if the community is not out of supply, it is generally a problem with the battery. The gas meter is out of power and needs to replace the battery, so let's take a household gas meter as an example.

1. When LO is displayed on the gas meter, it means that the gas meter needs to replace the battery, if it is determined that the gas meter is out of power, then the battery needs to be replaced.

2. First find the battery back cover and open it.

3. Remove the original battery and replace it with a new battery, which is to pay attention to the number of batteries the primary battery is, and the same is true for the new battery.

4. Some battery card slots will have a card bar stuck with the battery, which should remove the battery with a large space first, and then remove the battery with a small space.

5. If there is a foreign object in the card slot, remove the foreign matter in the card slot and install a new battery.

6. Close the lid.

The gas meter may not be ventilated because the gas connection pipe is bent, in which case it is simply a matter of aligning the pipe.

Notes:

If the connecting pipe is not bent, it may be caused by gas exhaustion, you can check whether there is a zero sign on the gas meter display, if there is, it means that the gas is exhausted, in this case, you only need to buy gas to restore ventilation.

It is also possible that the riser valve is closed, in a sense, the main pipe of the householder has an indoor filter valve, which is generally on the 1st floor, and in some cases on the 2nd floor, if the home lives on the highest floor, we can ask about the property.

We can contact the gas company for repair, it is best not to repair at home, the gas company maintenance personnel will go to investigate and confirm that there is no air pressure phenomenon, and then we open the riser valve, at this time the gas meter at home can be ventilated.

Without this step, there is no way to ventilate the gas meter, so blindly operating it at home will not only bring great danger to yourself, but also will not solve the problem immediately.

There are the following reasons why the gas meter is not gasy:1A mechanical fault in a gas meter is a fault meter.

It is necessary to report to the business unit for replacement. 2. It is because of the leakage linkage alarm alarm, and the interlocking valve linkage in the table is linked, which belongs to the safety protection setting. It is necessary to report to the gas business unit for investigation and repair, and restore the opening state of the meter valve.

3. The lock valve is closed because of the user's arrears table. It belongs to the business unit business setting. After the user pays the arrears, notify the business unit to open the locking valve.

Reasons 2 and 3 are only gas meters that are linked, such as wireless remote meters, wired remote meters and smart meters.

It is not shown on the table and is not outrageous.

1.The battery is not installed or the battery is installed incorrectly (the user needs to know the correct way to install the battery).

2.If the battery is used for too long (undervoltage), avoid using the battery for more than one year, try to remove the battery and reinstall it, and if it still doesn't work, change the meter.

The table shows "Undervoltage Shutdown".

1.There is a problem with the battery installation contact, and the battery needs to be reinstalled.

2.The battery is out of power, the battery needs to be replaced, and the residual power needs to be discharged before replacing the battery (remove the battery, press the gas meter button for a few times).

The table shows "Wrong Card".

The user's card has tried to ** other users' tables many times, resulting in the user's table can not recognize their own cards, the user can read the card with the card to the business reader, (the user must know the system of one table and one card, do not use their own card to mess with other people's tables).

The table shows "Purchase".

1.The remaining gas volume in the meter is less than 5 cubic meters, and the gas should be purchased in time after hearing the alarm.

2.The user inserts the card in the wrong direction (inserts the card in the correct direction (the IC card chip is facing downwards and the arrow is pointing inwards).

There is no abnormal display on the meter, but it cannot be recharged.

After confirming that there is no interference and external causes mentioned above, determine whether there is gas at the end of the meter, and if everything else is normal, change the meter. Note: The maintenance personnel pay attention to the use of the meter change card, after changing the meter card, first clear the new table, and then transfer the user information to the new table, and the user's old card can continue to be used.

Reasons why the table doesn't go out of words:

1. Serious overpressure of pipeline pressure: it will lead to damage to the internal structure of the meter, which cannot be measured normally, and must be replaced with a meter.

2. Human intervention: The gas company must check whether there is human intervention and other behaviors.

Table does not show reason:

1. Insufficient battery: the user must replace the new battery in time.

2. Short circuit of water inlet in the electronic control part: place the meter in a dry and ventilated place to evaporate the water in the meter, and then reinstall the battery.

3. Partial failure of the LCD display: the LCD module must be replaced by the manufacturer of the table.

Table does not read card reason::

1. There is a foreign object barrier in the card slot: the user must remove the foreign object in the card slot and reinsert the card.

2. The card insertion method or card insertion method is incorrect: the user must confirm whether the card insertion method is correct, and insert the IC card correctly, and the card reading part of the IC card and the card slot of the table card must be fully contacted.

3. Meter reading and writing card slot failure: replace the card slot, which must be handled by the meter company.

4. Insufficient battery: the user must replace the new battery in time.

Table does not open the valve reason:

1. The remaining amount is less than 0: the user must pay the fee and recharge at the business department in time and insert it into the table.

2. Insufficient battery: the user must replace the new battery in time.

3. There is a strong magnetic or interference source around the meter: the magnetic field has a disturbing effect on the measurement and causes the valve to be closed, and it is necessary to check whether there is a strong magnetic object around it and remove it, and the fault will be removed.

4. Partial failure of electronic counting: reed switch failure or displacement must be handled by the watch manufacturer.

5. Through the table (negative number table): generally caused by valve failure, the table balance is displayed as a negative number, and it is necessary to detect whether the pipeline pressure is too high, and contact the table manufacturer to deal with it. The copyright belongs to the author.

Hello, dear. The gas meter does not go out of the word, but the reasons and solutions for gas ventilation are as follows: 1. The pressure of the digging pipeline is seriously overpressurized

It will lead to the destruction of the internal structure of the meter, which cannot be measured normally, and must be replaced by the meter. 2. Human intervention: The gas company must check whether there is human intervention and other behaviors.

The table does not show the reasons: 1. The battery is insufficient: the user must replace the new battery in time.

2. Short circuit of water inlet in the electronic control part: After placing the meter in a dry and ventilated place to evaporate the water in the meter, the battery is reinstalled. 3. Partial failure of the liquid crystal display:

It is necessary to judge the Suiwang manufacturer to deal with it and replace the LCD module.

There are many reasons why the natural gas meter is not ventilated, such as the gas meter is in arrears or the internal battery is automatically cut off when the battery is out of power, resulting in no gas output; There is no gas due to the unopened valve of the pipeline**; The gas stove battery is not installed or the power is insufficient, resulting in the solenoid valve cannot be opened and there is no gas input; The solenoid valve is damaged; The solenoid valve drive voltage output of the pulse igniter is faulty, causing the solenoid valve to not work.

The corresponding solution to the above problems: check the balance of the gas meter and prepay the fee in time to ensure that there is no arrears. Check whether the battery in the meter is insufficient and replace it in time; Check whether the gas pipeline valves are all open, or if they are damaged, replace them as soon as possible to ensure that the gas is normal**; Check whether the battery box under the gas stove has batteries, whether the power is sufficient, and replace them in time; Replace the solenoid valve of the original model of the same specification to ensure that it is opened normally under control; Replace the pulse ignition assembly to protect the driving voltage output of the solenoid valve normally.

Precautions: Gas stoves and gas water heaters are the same as gas water heaters, if the flame-out protection device is damaged, it is very harmful and prone to gas leakage or ** situation, so if you find such faults, you should ask professional repair personnel to repair them in time.

Today's natural gas meters have built-in solenoid valves, and it is necessary to install a battery, and then charge the gas in the gas card into the card, so that the gas meter can be opened for ventilation.

Answer dear, hello, I will help you answer this question, I am answering it for you, please wait a while, don't be too anxious, I hope my answer can help you, solve your troubles, I wish you a happy life and good health.

Hello, the smart gas meter is not ventilated may be due to the gas meter battery has no power, the LCD screen shows lo, the valve is closed, there is no reflection after inserting the gas card, and the user needs to replace the gas meter battery.

If the replacement has just been completed, the master will close the valve in front of the meter for safety reasons, and open it by itself when the user is in normal use, if the air leakage is found during the security check, the security inspector will close the valve in front of the meter for safety reasons. In this case, you cannot open the valve in front of the meter by yourself, and you need to make an appointment with a maintenance master to repair the air leakage immediately.

Ask a good question, our smart gas meter is inductive, not inserted into the card, I just took the card in the induction area a few times and it will not be ventilated, and it will start to be good.

I'm angry that I still have a lot of money in the card, what's going on?

Question: How do you crack it?

Answer: The anti-interference ability of IC card gas meter is weak, especially in places where the environment is relatively harsh, such as the catering industry of commercial users, humidity, high temperature, oil smoke, steam, etc. are corrosive to it, and often cause the IC card to be inserted into the meter, and the meter does not read the card.

Question: I'm not a gas meter with a card, it's a smart meter.

It didn't work to ask questions, I wiped it off.

The natural gas meter is not ventilated, so ordinary people should not mess around, and it is best to find a gas company to deal with it.

Close the valve, pull out the hose, plug the fitting with your fingers, and open the valve to see if there is any air coming out (fingers press the keys to quickly lift and press). If there is air, there will be a gentle flow of air towards the fingers, and the dial will move; If there is no air, it is the opposite, if there is no gas on the fingertips, the dial will not move at all.

If there is gas, look down from the stove. For example, the cooktop battery is low, such as the cooktop ignition failure, nozzle failure, etc.

If you run out of gas, check forward from the meter. For example, the gas meter battery is low or the battery is loose, such as gas outage, such as gas meter failure, etc.

Extended Materials. Natural gas is a gaseous fossil fuel composed mainly of methane. It is mainly found in oil and gas fields, and also in small quantities from coal seams. Natural gas is also buried in underground closed geological structures, some of which are stored in the same layer as **, and some of which exist separately.

For natural gas stored in the same layer as **, it will be extracted together with **. The main use of natural gas is as fuel, which can make carbon black, chemicals and liquefied petroleum gas, and propane and butane produced from natural gas are important raw materials for modern industry. Natural gas is mainly composed of gaseous low-molecular-weight hydrocarbons and non-hydrocarbon gases.

There are many reasons why the natural gas meter is not ventilated, such as the gas meter is in arrears or the internal battery is automatically cut off when the battery is out of power, resulting in no gas output; There is no gas due to the unopened valve of the pipeline**; The gas stove battery is not installed or the power is insufficient, resulting in the solenoid valve cannot be opened and there is no gas input; The solenoid valve is damaged; Solenoid valve actuation of the pulse igniter.

Hello, the natural gas meter has a fee but is not ventilated for the following reasons: 1The card is incorrect, for example, the gas card is reversed, the card is not in place, etc.; If this is the case, it would be nice to reinsert the card correctly; If there is still no gas after paying the gas bill, it may be that the IC is damaged, and the metal chip of the IC card may be worn out after a long time, so you can go to the business hall to check and replace the IC card.

If there is no gas after paying the gas bill, it may also be because the gas in the meter has run out of gas before, and the controller will automatically close the valve; The valve can be opened by pressing the inquiry button on the gas meter or inserting the gas meter.

2. If there is no gas after paying the gas bill, the battery is dead, you can observe whether there is a prompt on the screen to replace the battery, and if there is, replace the new battery; If there is no gas after paying the gas fee, it may also be caused by the delay in recharging or the operation error of the gas sales personnel, so you can insert the card after a period of time, or consult the staff of the business hall; If there is no gas after paying the gas bill, there is also because the gas meter reader is broken, and you can contact the after-sales personnel for repair.

Dear, I hope my answer is helpful to you, and I wish you a happy life!