How to make the bamboo man? How to make bamboo man?

2. The long point is the foot, of which the four hands are also divided into long and short ones, and the arms are long.

3. Make the head with bamboo joints. Two holes are split between about 4 minutes and 1 under the bamboo knot. Make an arm, (with the tip of a knife.) Drill slowly) don't crack.

4. Stringing. Leave the middle of the line between the retreats. The two ends of the rope are on each hand.

Materials made by the slub man: bamboo, thread for the sole, etc.

The steps of the production method of the bamboo man are as follows:

1. First of all, the bamboo is sawn into inches long, which can be used to make the head and body parts of the bamboo man;

2. Then you can drill a pair of small eyes;

3. Sawed eight short bamboos to make the limbs of bamboo people;

4. Finally, use a thread to thread the limbs, so that the bamboo man is ready.

To put it simply, put the bamboo man on the table with a gap, put your hand under the table, and gently pull and manipulate it. You can find two discarded crochet needles on the knitting machine, which are loaded in the hands of the bamboo man, and they become the tiger head double hook of Dou Erdun.

The bamboo man's gameplay can embed the shoe thread with nine bamboo knots into the crack of the desk, and as soon as it is tightened below, the bamboo man standing on the crack will stand like a strong man, spread his arms with forked legs, loosen and tighten the shoe line, and the bamboo man will dance and move in the swing. Two bamboo people put together, can also fight.

Detailed steps for making a bamboo man.

Dear, hello, 1. Use a pencil to draw the proportion of head, neck, torso, arms and legs on a chopstick. Because the head should be wide, it should be the length of two heads. 2. Use scissors to press the mark and cut it into many small pieces.

3. Tie the two long bamboo joints together with paper tape. 4. Stretch out a line about one foot long on the shaft, stick it on the back of the head with paper tape, and do not cut it after sticking. 5. Under the head, roll a small piece of bamboo around the neck with paper tape and roll the thread inside.

The thread remains uncut. 6. Put the longest section of the torso under the neck, also roll it with paper tape, and roll the thread in it at the same time. The thread is not cut yet, and the thread is left for the underneath.

7. Put a bamboo knot on both legs, under the torso, and also roll it in with paper tape and thread. After gluing the thread to this leg, fold it back to the torso and glue it with paper tape. The thread is reserved for the left leg.

8. The bamboo of the other leg also uses the same method to roll the thread inside. At this point, the line can be cut. 9. Take another line, first leave a one-foot-long thread, and then roll a piece of arm bamboo with paper tape and thread in it.

10. Then leave the thread a chopstick-thick amount, and then roll the other arm bamboo with paper tape to roll the thread inside. Once glued, leave another foot-long thread and cut it. 11. Cut two one-foot-long threads, one with paper tape and stick it to the lower end of the right leg.

Another one-foot-long thread was glued to the lower end of the left leg with paper tape. 12. Put the two arms that you just glued on the shoulders under the villain's neck. The villain is roughly done at this point.

13. Use colored pens to draw facial features and hair on the villain's face, and paint the arms and legs in your favorite color.

The method of making the bamboo man is relatively simple, using segmented bamboo and rope to drive its movement. The head is easy to drive 1 to 2 knots, 2 knots each of the arms, 2 to 3 knots of the legs, and the middle can be threaded with a rope.

Materials made by the slub man: bamboo, thread for the sole, etc.

1) Saw the bamboo pole into an inch long section to make the head and body of the bamboo man;

2) drill a pair of small eyes in the upper and lower positions;

3) Saw eight short limbs;

4) Thread the limbs together with threads.

He stood like a strong man, majestic, with crossed legs and open arms, similar to the old and thick neck of the young man in the current bodybuilding competition.2 As soon as the shoe thread was loosened and tightened, the bamboo man danced with his hands, and moved on the ground. When the two bamboo people are put together, it is a fight, fighting headless and brainless, tireless, and will never fall. 3 Sometimes the line of one of them is full 0

Use different lengths of bamboo and thread to wear according to your imagination

Bamboo and rope, as well as brushes.

There are many opportunities that do not open the Year of the Monkey.

It should be caused by insufficient light, although the bamboo begonia can not withstand the strong light exposure in summer, but at least it should be given scattered light or better light! And it is best to average more than 8 hours a day.

The better the light, the stronger the color, and vice versa; However, the stronger the sunlight in summer, the worse the growth of the branches and leaves.

Tools Raw materials.

Knives, small saws, shoe threads that tie the soles of shoes.

Method steps.

Find some small bamboo poles, saw a section as long as a knuckle, this is the torso and head of the bamboo man, and then use a knife to make a hole on the left and right on it, which is used to hold the arm, and use the bamboo pole to saw out eight small sections, which are the hands and feet, and finally string them together with shoe threads, so that it becomes a bamboo man.

Embed the thread under the bamboo man into the crack of the desk, and tighten it underneath so that the bamboo man can stand up.

We control the movement of the slub man by controlling the tightness of the shoe thread, and put two slub men to fight each other, just like a TV series.

You can also put ** in the hands of bamboo people, such as a popsicle stick, which is like Sun Wukong holding a golden hoop stick.

Put two discarded crochet needles on the knitting machine, and it becomes Douldun's tiger head double hook.

Bamboo man is a traditional handicraft, and the following is a simple way to make a bamboo man:

Material: A piece of bamboo.

Knives (e.g. knives, saws, planers, etc.).

Rope or line. Steps:1Prepare a dry section of bamboo with a moderate diameter, and determine the size and proportion of the bamboo knot according to your preferences and needs.

2.Use a knife to saw the bamboo to the right length as a body part of the bamboo man.

3.Depending on the shape of the bamboo man, a knife is used to cut one end of the bamboo into the shape of a head and trim it into a rounded shape.

4.The body part of the bamboo man is divided into two sections, the upper part is the chest cavity and the lower part is the waist.

5.Two small holes are cut in the thoracic part to connect the head and body.

6.Cut a small hole in the waist part for attaching the legs.

7.Cut two pieces of bamboo as legs, trim them to the appropriate length before burying them, and cut them at one end into the shape of a foot.

8.Insert the head into the hole in the thoracic section, making sure that the head is firmly attached to the body.

9.Insert the leg into the hole in the lumbar section, making sure the leg is firmly attached to the body.

10.Check that the connecting part of the bamboo man is stable, and if necessary, you can use glue or wire to fix the connecting part.

12.Finally, use a rope or thread to secure the bamboo figure to a support to maintain a stable standing position.

It's a simple way to make bamboo man, and you can adjust and improve it according to your creativity and skills. Please pay attention to safety during the production process, and be careful when using the knives to ensure that your fingers are protected. Good luck making beautiful bamboo people!

The method of making the bamboo slices usually involves cutting the bamboo strips into segments of different sizes, then tying them together with silk threads, then coloring them with paint, and finally adding colorful rubber clothes.