The mobile phone is flooded, except for the earpiece has a noise, everything else is normal, can I c

The solution to the Apple mobile phone can't turn on: The Apple mobile phone can't be turned on First of all, determine whether it is caused by the fact that the mobile phone battery is out of power, first charge the mobile phone for a while and press the power button to see, it may be because the mobile phone is not low enough power and the mobile phone cannot be turned on normally. In this case, the Apple mobile phone can't turn on, and it may be that the phone is in a dead state, you can also try to press and hold the power button at the same time, the power on button + home button, and wait a few seconds for the phone to automatically restart.

There are usually Apple mobile phones in the process of flashing or updating and upgrading, you will also encounter the problem of not being able to turn on, and when you encounter the problem of not opening the machine caused by this reason, usually due to the improper operation of the mobile phone flashing or system upgrade, the white apple, the boot has a display, but it has been parked in the logo interface of the iphone, and the mobile phone cannot enter the system. If the above methods do not solve the problem, then it may be caused by the hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to contact Apple.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

I think it can be charged, but it is still recommended to check the charging port to see if there are any water stains left to avoid leakage and short circuit, and if so, you can use a wind gun to dry it. For the whole machine to immersion, since it has been turned on, it can be used for a long time, and there will be evaporation and diffusion of water heating itself.

Hello, if your phone is in the water, except for the noise of the earpiece, everything else is normal, you can not charge it until the water is completely dry.

The mobile phone earpiece is flooded, and there is noise, and the following points can be repaired, and the solutions are as follows:

1. After the mobile phone enters the water, keep it away from the water source immediately, and do not try to turn on the phone or press the shutdown button.

2. Please dry the water stains on the surface of the mobile phone in time, and place the mobile phone in a strong water-absorbing environment (such as activated carbon, rice, moisture-proof agent) for more than 48 hours, and confirm that the mobile phone is dry before you can try to turn on the operation.

3. If the phone is turned on, please press and hold the power button to turn it off. If your phone is turned off, don't try to turn it on.

4. Take out the SIM card and microSD card of the mobile phone as soon as possible to avoid water damage to the mobile phone card and memory card.

5. Please bring your mobile phone to the franchise store for maintenance as soon as possible to avoid unnecessary losses.

If after a period of observation, the sound of the mobile phone earpiece is still small and noisy, it may be that the hardware has failed, it is recommended to back up the important data in the mobile phone in advance, and bring the purchase invoice to the local mobile phone after-sales service center for testing and maintenance.

It's best to go to a mobile phone store and check it out.

First, you used the phone after it was flooded, and it was used normally, indicating that the phone was not particularly damaged.

Second, you can't be sure if your phone has standing water other than the earpiece.

This kind of noise is generally not good on its own, because there is stagnant water inside, and it is obviously unrealistic to wait for him to evaporate by himself.

Hello, if the mobile phone earpiece is stupid in the water, resulting in noise or no sound, you can try the following methods:1Dry:

Turn off the phone, put the phone in a dry and ventilated place, and turn it on after the moisture inside the phone evaporates and disappears. This process can take anywhere from one to a few days to get ready. 2.

Use a hair dryer: Turn up the volume of your phone to the lowest and use a low-heat air to dry the earpiece of your phone, but be careful not to get too close to it to avoid over-drying. 3.

Alcohol scrubbing: Dip the cotton swab in an appropriate amount of alcohol and wipe it at the mouth of the earpiece, but be careful not to use excessive force and excessive alcohol. 4.

Professional mechanic: If none of the above methods work, you may need to resort to professional electronic repair services to avoid greater losses caused by hand error. It is recommended that when using the mobile phone, try to avoid letting the mobile phone get into the water, and use a waterproof case or insulating material to wrap it.