May I ask why I don t turn on the electrical appliances and trip? Jump 10 from time to time

If he doesn't pay for repairs, he has a problem with his own line, which may be a leakage of the line, which leads to a short circuit in the line and trips. If you look at whether some of your commonly used devices are leaking, it may also cause a short circuit. Your trip must have been formed by a short circuit, just find out if it is repaired under the **short circuit.

1. Maintenance is definitely required, otherwise it cannot be used normally, but who pays this fee depends on how the agreement between you and the landlord is agreed.

2. "The meter is still flashing when the electric meter is not connected to any electrical appliances", which is normal, it is the energized indicator light, and it will be lit when there is electricity. The key is to see if the meter reading is still increasing when you don't have any appliances connected. If so, you have to care about the routing of your home.

Electrical appliances are not connected or tripped, connected electrical appliances are also indefinite time of jumping, must be the cause of leakage on the circuit, this must be the landlord to be responsible.

I can see that this landlord is not a person who likes to be reasonable, and you don't need to explain to such a person, so you can quickly find another place to put For example, a child broke the door of your house, but you don't know who it is your responsibility to tell the landlord, then you are too insecure to live here.

The home trips at every turn, and sometimes it trips without electricity, and the old electrician explains the reasons for the trip in detail.

Reason: 1. It depends on whether the missing alarm is empty or empty, and the false alarm is the kind that has a T switch, and the jump indicates that there is an electrical leakage. Unplug them all and plug them back one by one, and the one that jumps is.

The empty jump is that the switch is broken or there is a circuit, and the electrical appliance is short-circuited, and the above method is tried. Replace.

Look at whether it is an old house or a new house, whether the wire is a cloth pipe or a bright one, in general, the new house should not consider the line problem, the old house should consider the leakage of the line itself, and the leakage protector itself also fails.

2. Replace the air opening with some higher power, the air opening at home likes to trip, and does not use high-power electrical appliances, and the main reason for jumping after a while is that the existing gate aging capacity becomes low.

What is the reason for not using electricity but always tripping, the main reasons are as follows: 1. The switch is overloaded, and the rated current of the switch is not matched. 2. The fire wire on the load side of the switch is grounded, and the neutral line on the load side of the leakage switch is grounded, which will also cause tripping.

3. The switch is damaged or the grounding of the electrical appliances used in the car stove is short-circuited, the zero line on the load side is closed and not mixed with the zero line of other circuits, and the line insulation is too low. The leakage switch cannot be closed normally Check the method: 1. Check whether the reset button of the leakage switch is reset.

After pressing the reset button, it can be closed normally. 2. Check whether the wiring of the lead sail leakage switch is correct. incorrect and rewired.

3. Check the insulation of the line on the load side of the leakage switch, if it is short-circuited and grounded, it needs to be eliminated before it can be closed normally. I hope it can help you. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.

Finally, I wish you good health and a good mood!

Summary. Hello: If you don't use any electrical appliances at home but there is a tripping situation, it may be due to the following reasons:

1.Short circuit: There is direct contact between the two wires in the circuit, resulting in excessive current, and the trip protector automatically cuts off the power supply.

This can be caused by aging, damaged, or improperly installed wires. 2.Overload:

The total power of the electrical appliances connected in the circuit exceeds the maximum load that the circuit is subjected to, causing the trip protector to automatically cut off the power supply. This situation can be caused by excessive electrical load in the home, aging electrical appliances, or improper use. 3.

Circuit failure: A component in the circuit fails, causing the trip protector to automatically cut off the power supply. This can be caused by aging, damage, or improper installation of circuit components.

If you encounter this situation, it is recommended that you first check the circuit for short circuits, overloads, etc., if it cannot be solved, it is recommended that you ask a professional electrician to overhaul it.

Dear Hello: If you do not use any electrical appliances at home but there is a tripping situation, it may be due to the following reasons:1

Short circuit: There is direct contact between the two wires in the circuit, resulting in excessive current, and the trip protector automatically cuts off the power supply. This can be caused by aging, damaged, or improperly installed wires.

2.Overload: The total power of the appliances connected in the circuit exceeds the maximum load that the circuit is subjected to, causing the trip protector to automatically cut off the power supply.

This situation can be caused by excessive electrical load in the home, aging electrical appliances, or improper use. 3.Circuit Fault:

A component in the circuit fails, causing the trip protector to automatically cut off the power supply. This can be caused by aging, damage, or improper installation of circuit components. If you encounter this situation, it is recommended that you first check whether the circuit has short circuits, overloads and other problems, if there is no lifting method to solve, it is recommended that you ask a professional electrician to overhaul it.

Pro: There is no electricity, not necessarily immediately after the gate, but when you jump unconsciously do not know, suddenly he jumped, pro It is also possible that the line is aging You can contact the local electrician to check.

I didn't have electricity in this room last night, and I found out that it had tripped again this morning, and I rented it in the morning and went up again, and I still didn't use any electrical appliances in the room. But now the switch doesn't work!

Pro, old tripping is not a problem in one room, you need to check the whole piece of the line.

Dear, you can contact your local electrician and let the electrician take care of it for you.

The following could be the cause of the trip:

1.Overload: If you use too many appliances at the same time, the current in the circuit may exceed the rated capacity of the circuit, causing tripping.

2.Short Circuit: If any one of the wires in the circuit comes into contact with another wire or ground, it can cause a short circuit and the current will increase suddenly, causing a trip.

3.Ground leakage: If there is leakage in the lines in the line of an appliance or circuitist, it can cause tripping.

4.Circuit deterioration: If the circuit is aging or damaged, the current may be unstable, resulting in tripping.

If none of the above is the cause, it is recommended that you have the circuitry and appliances inspected by a professional electrician to determine the source of the problem.

No electrical appliances are used in the home, but the trip occurs, which may be caused by faulty circuits or improper wiring in the home. It may also be caused by the aging of electrical appliances in the family group, such as switches, sockets, etc. It can also be caused by a dead or overloaded battery at home.

In short, if this happens, it's best to find a professional to help detect the cause and fix the problem.