If the bottom of the rice cooker is rusty, will it use more electricity? How to get rid of it?

Updated on delicacies 2024-06-27
12 answers
  1. Anonymous users2024-02-12

    When cleaning, use toothpaste and beer, stir well, apply to the rusty area, soak for a while, and then rub it repeatedly with a steel wool ball. After washing it at the end, it can be air-dried.

  2. Anonymous users2024-02-11

    No, the rust at the bottom of the rice cooker can be removed by brushing it with a steel wool ball, and if it still doesn't work, you can use some detergent.

  3. Anonymous users2024-02-10

    I don't think so. We can use a brush to brush the bottom of the pot, and if we can't remove the rust, we can add some dish soap to brush it. If it still doesn't work, brush it with baking soda mixed dish soap.

  4. Anonymous users2024-02-09

    Question 1: How to use the rice cooker when it is rusty 1. Sour vinegar method; Vinegar removes rust. It's effective. Heat the pot first and turn off the heat. Use a rag and dip some vinegar directly to wipe the rust area. Rust usually falls off right away.

    2. Lard method; The lard is rich in grease, so there is no need to be afraid of rust. Put the fatty pork in the pot without oil. Wait until the oil in the pork boils out, continue. Grease the inside of the pan with lard.

    3. Washing rice water; The decontamination effect of rice washing water is very strong. Soak it in thick rice water for about 2-3 hours. Boil the rice water, and rub it little by little with an iron rag during the boiling process.

    After rubbing the pot, wait for the rice water to boil. The rice washing water is boiled, cooled, and poured out. Rinse with water.

    4. a steel wool ball; Booty items like steel wool balls can be removed. Use a steel wire to slowly rub the rust off and clean it. Heat a small amount of oil in the pan and slowly turn the spoon so that the oil covers all the parts of the pan. Heat it until it smokes, repeat it several times, and it will not rust easily.

    5. Sandpaper or whetstone; Use them to remove rust quickly and thoroughly. Use sandpaper or whetstones to grind the rust off. Rinse with clean water.

    Question 2: What should I do if the rice cooker is useless for a long time and finds that the inner liner is rusty? Rust can be removed with vinegar.

    Question 3: How to remove rust from the rice cooker The rice cooker is rusty, and the iron in the aluminum alloy composition has been exposed. If it is because of the shell, it can be solved with vinegar, and if it is a problem with the inner tank, it should be replaced in time.

    Continued use will infiltrate some metal elements that are not conducive to people's health.

    Question 4: What should I do if the inner liner of the rice cooker is rusty Pour some vinegar into it, wait for half an hour or longer, and finally wash it; Or use a steel wool ball to brush slightly, but don't brush too hard, otherwise it will hurt the rice cooker.

    Question 5: What should I do if the inner liner of the rice cooker is rusty It is best not to use it, rust is not good for the human body. Although it still works.

    Question 6: What should I do if the inner liner of the rice cooker is rusty? You can take the rice cooker to the place where you bought it, or go to the after-sales service to see, it should be a quality problem!

    After the sale, you will be replaced with an inner tank, but the premise is that your inner tank has not been artificially damaged, that is, caused by cleaning with metal objects such as steel wool balls.

    Question 7: What should I do if the rice cooker is rustyMy rice cooker is rusty, and I am afraid that cooking will be harmful to the body Then change it, after all, the body is more important.

    Question 8: What should I do if the tray of the rice cooker is rusty The principle of use of the code is used to change the strength arm.

    When the code moves to the right, it is farther and farther away from the fulcrum, and the arm is getting bigger and bigger, so the torque is getting bigger and bigger, which is equivalent to adding a small weight to the right disk.

    Question 9: About the rust of the rice cooker Polished it with sandpaper, there is no harmful effect.

    It is caused by putting the inner tank in the pot every time it is not completely dried after washing. Pay attention later.

    Question 10: About the rust of the rice cooker due to being placed in a humid place with air for a long time, and frequent contact with water. As a result, the rice cooker has been in the moisture period for a long time, and it has not been dried in time and dried with a handkerchief or paper towel, resulting in rust in the rice cooker.

  5. Anonymous users2024-02-08

    The following materials and tools will need to be prepared: toothpaste, beer, cotton swabs, steel wool balls, and wet wipes.

    1. First of all, take out the prepared toothpaste and beer and set aside.

    2. Pour the beer and toothpaste into a bowl and stir well with a cotton swab.

    3. Pour the above liquid into the rice cooker and let the mixture of beer and toothpaste soak in rust and stains.

    4. Carefully wipe the stain several times with a steel wool ball.

    5. Clean the bottom of the rice cooker with wet wipes and water.

    6. Finally, place the cleaned rice cooker for ventilation and let the bottom of the pot dry naturally.

  6. Anonymous users2024-02-07

    Maybe after a year or two, it will feel like a layer of dirt here, which is not only unsightly, but may also affect the heating, for example, the heating speed will be slower, and there will be a sound when heating, so I will teach you how to solve it.

    First of all, the rice cooker is powered off and the inner tank is taken out, the bottom of the pot is turned upside down, and the bottom of the pot is slapped a few more times, and some of the debris and dust that may be in it will fall out.

    Prepare a piece of paper, preferably a thicker kitchen paper towel, wet it with clean water and twist it, squeeze out the excess water, not dripping, slightly moisten it, and then spread it on the bottom of the rice cooker, wait for about 20 minutes.

    Take a toothpaste and an old toothbrush that you don't use, preferably the kind with particles in the toothpaste, then squeeze it on the chassis and wipe it with a toothbrush, and brush it a few times, spread the toothpaste evenly at the position of the chassis, and then cover the kitchen paper towel you used before, so that you need to cover it for about half an hour, take it off after half an hour, wipe off the toothpaste with paper, and then use a slightly moistened rag to scrub the bottom part, you can feel it when you wipe it, the stain on the bottom plate position has become softer, and it can be cleaned much without wiping very hard.

    Some friends say that they can't wipe it to a brand new look, in fact, this has something to do with time, some people use the rice cooker for a year and start wiping, it's relatively simple, but some use four or five years to wipe, the stain is too stubborn, so the effect is average, not very good, you can properly extend the time to cover the wet paper, but not too long, otherwise the toothpaste will also dry out.

    Generally speaking, there will still be some moisture on the surface after cleaning, so it is best not to use the rice cooker on the day after cleaning, until the water on the surface has completely evaporated.

    However, the aging of the rice cooker is actually inevitable, and it is easy to do so after a long time, so it is recommended that you look at the effect after scrubbing, and if the cooking speed is very slow, you can try to replace it, which can save the time of cooking.

  7. Anonymous users2024-02-06

    We can use baking soda to wash the pan so that the rust can be removed quickly.

  8. Anonymous users2024-02-05

    Use lemon to remove limescale. Prepare a lemon, chop it, and bring it to a boil in the rice cooker with water, let it soak in boiling water for a while before discarding it all, so that you can easily remove limescale from the rice cooker.

  9. Anonymous users2024-02-04

    Scrub with stainless steel, stainless steel has a strong friction ability and can wipe off rust.

  10. Anonymous users2024-02-03

    1.White vinegar clean.

    First, mix the white vinegar and water evenly, then apply it to the heating plate of the rice cooker, then slowly wipe it with a toothbrush, the dirt on the heating plate will gradually decompose, and then wash it with water.

    2.Toothpaste clean.

    Toothpaste has a great attack on better cleaning power. Place it on the heating plate of the rice cooker and slowly wipe it with a rough cloth. The dirt on the heating plate will gradually dissolve until toothpaste is formed. When the dirt is finished decomposing, wipe it with a damp cloth.

    3.Alcohol cleansing.

    The alcohol is volatile and will not damage the heating plate of the rice cooker. Dip the hot plate with a damp paper towel. The alcohol reacts chemically with the dirt on the hot plate. When the reaction is complete, wipe it clean with a rag.

  11. Anonymous users2024-02-02

    You're probably talking about rust at the bottom of the hot plate and rice cooker. Find six larger spacers and pad them in rusty areas. Tighten it from scratch with screws. I don't know if that's the case.

  12. Anonymous users2024-02-01

    It should still work, as long as it conducts heat.

    If it really doesn't work, then change it.

Related questions
14 answers2024-06-27

After the bottom of the rice cooker is rusted, it will definitely be very power-consuming, because of its heat conduction function, it will become very poor, which requires us to clean up the rusty place at the bottom of the rice cooker.

13 answers2024-06-27

1. The current rice burgers are all non-stick, that is, there is a layer of non-stick film in the inner tank, as long as it is not destroyed, the rice will not stick to the pan when cooking rice in a normal way. >>>More

25 answers2024-06-27

1. The most direct effect of not drying is that it will make a "swish, swish" sound, which is the most direct manifestation of less water at the bottom of the pot. >>>More

19 answers2024-06-27

1.First sprinkle the bottom of the pot evenly with a layer of salt, and then put the pot on the fire (the fire should be turned on large), and after the pot is dry, you can use a spatula to spatula, this method saves time and effort 2Soak it in warm water for an hour first, then rub it with a pot ball 3 >>>More

12 answers2024-06-27

Hello friend, you can flatten the bottom of the pot, the spring coil that can touch the bottom of the pot should be usable, you can try it, pay attention to it when you use it in the future, how can you still burn it dry, thank you. (I have a new Supor if needed.) >>>More