How to use a squatting toilet, how to use a squatting toilet How to use a squatting toilet

Squatting toilets are no strangers to everyone, many people have them at home, the use method is very simple, people can squat on it to defecate, more hygienic and convenient.

In order to give you a deeper understanding of squatting toilets, here are several common squatting toilets, I hope they are useful.

1. Split squatting toilet: it does not have a water trap, and it is separated from the trap, which is called a split squatting toilet, which is easy to install, has a large water flow and sufficient momentum.

2. Siamese squatting toilet: It comes with a water trap, which can use the bend of the water trap to create a "water seal" to prevent the odor of the sewer from flowing backwards.

3. Squatting toilet without front water retainer: the shape is simple and elegant, and the application is universal.

4. Squatting toilet with front water retainer: It can keep the ground near the squatting toilet clean and hygienic.

Flush toilet principle.

Toilet buying tips.

Toilet leakage problem solution.

Toto toilet ** recommended.

Before installing the squatting toilet, we must first prepare the tools to use, such as raw meal tape, glass glue, oil sludge, tape measure and level, etc.

Here are the steps to install the squatting toilet:

According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the sewer pipe inlet and the ground level.

The depth of the pit reserved for the installation of the squatting toilet under the ground is greater than the height of the toilet.

Place the connecting rubber plug into the water inlet hole of the squatting toilet and clamp tightly. Apply a layer of glass glue or putty to the outer edge of the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to prevent water leakage.

Apply a layer of glass glue or putty to the edge of the outlet of the squatting toilet, put it into the inlet of the sewer pipe and screw it together, and set the toilet level with coke residue or other filling.

Open the water inlet system and check each joint for water leakage, and if there is a water leak, check the condition of each joint. until the problem is resolved.

After checking that there is no water leakage at each joint, fill the area around the toilet with filler, and fill in the contact surface between the ceramic and the cement mortar.

Elastic materials such as asphalt or linoleum over 1 cm.

Use cement mortar to fix the squatting toilet in the horizontal plane, and after it is stable and firm, then pave the bathroom floor tiles on the cement surface.

Test flushing, if there is no abnormality, you can use it.

Finally, precautions for installing a squatting toilet:

All parts of the squatting toilet that come into contact with concrete should be filled with elastic materials such as asphalt or linoleum, otherwise the toilet will break due to cement expansion.

When finishing with heat-dissolved asphalt, it is necessary to prevent the toilet from bursting due to heat.

The installation of the toilet should be operated in strict accordance with the instructions, otherwise the toilet will be broken.

The squatting toilet inlet flushing device mainly includes ball valve, high tank flushing, electromagnetic induction flushing valve, delay flushing valve, manual flushing valve, etc.

<>1. The use of the squatting toilet is very simple, and people can squat on it to defecate, which is more hygienic and convenient.

2. Split squatting with hitch: it does not have a water trap, and the trap is split separately, which is called a split squatting bend, which is easy to install, has a large water flow and sufficient momentum.

3. Siamese squatting toilet: It comes with a water trap, which can use the bend of the water trap to create a "water seal" to prevent the odor of the sewer from flowing backwards.

4. Squatting toilet without front water shield: the shape is simple and elegant, and it is widely used.

5. Squatting toilet with front water retainer: It can keep the dry talk source on the ground near the squatting toilet clean and hygienic.

The installation of the squatting toilet has its own method, what is the installation method of the squatting urinal? Today, I will answer them one by one for you.

1. The assembly of the drainage pipe, first of all, the two straight pipes should be connected, and then the elbow pipe should be connected, after the straight pipe and the elbow pipe are all connected, the connected pipe will be installed to the part of the original pipeline, and some of the original pipes can not be replaced.

2. There are two water valves in the squatting toilet pipe, one is the water inlet valve and the other is the drain valve. Both valves need to be installed, installed in the tank, then inspected for problems, and finally the lid of the tank closed.

3. Hang the hook of the hanging water tank on the wall, put the water tank on the hook, and finally install the drain pipe to the bottom of the water tank.

4. After all the spare parts are installed, the installation of the water tank of the squatting toilet is basically completed. Finally, the hose should be connected to the water inlet outside the water tank, after the connection is completed, you need to test the water operation, check whether the pipe has a water leakage problem, once the problem is found, it must be dealt with in time, you can check the manual for reinstallation.

To install a toilet on the location of the squatting pit, you must first remove the squatting pit, and then.

Then install the toilet, when you buy a toilet, it is best to choose a toilet with a large wall distance, because there will be a gap between the back of the toilet and the wall, and the gap behind the toilet wall will be small, and the appearance and use will be much more comfortable.

1 Treat the ground drain as high as the ground, and then press the center of the outlet to draw a cross extension.

2 Draw a crosshair along the toilet outlet to the spot where you can see the edge of the toilet, 3 Put the horse to the drain with the crosshairs overlapping.

4 Draw a line along the outside of the toilet bowl and remove it.

5 Place the toilet sealing flange on the drain on the ground, and make a circle of glass glue along the inside of the overall circle line of the toilet bowl.

6. Place the toilet on top of the crosshair, press the bottom edge of the toilet on the glass glue, connect the water hose, and install an angle valve at the water outlet on the wall to turn off the water for maintenance in the future.

7 Do not use and keep the ground dry for 24 hours. I also looked at the tutorial on the Internet, last time I went to the Jiumu store to buy a squatting toilet, the people in the store had a very good attitude, and they also helped to contact the master.

Reply. 1. Installation method: 1. Before installing the squatting toilet, check whether there are foreign objects in the sewage pipe and the channel in the product. Squatting toilet 2, first try to fix the installation position and height of the squatting toilet and the docking of the sewage outlet and the sewage pipe before taking the squatting toilet.

3. Install the water inlet and water tank, the inner diameter of the water inlet pipe is about 28mm, and the distance from the bottom of the water tank to the water inlet of the squatting toilet is 1500mm-1800mm. 4. After the flange rubber ring is sleeved into the water inlet pipe, it is docked with the water inlet of the squatting toilet, and then the installation surface of the squatting toilet must be fixed, and the front, back, left and right of the squatting toilet must be leveled with a level, and then the product sewage outlet and the sewage pipe interface must be sealed with glass glue or cement sand paddle.