What to do if the toilet tank does not automatically water on

1.What should I do if my toilet flush tank is not full?

1.Start by opening the main water valve of the toilet bowl and see if any water is coming out. If the water stops, it will naturally not be able to be filled with water.

2.If the water supply does not stop, you need to open the tank lid to see if there will be water in the tank. Check that the piston can be plugged. If the water tank is not plugged, it means that it will leak and the piston needs to be repaired or replaced in time.

3.Close the toilet lid and check that the flush button can touch the inlet valve. If you can, you need to adjust the inlet valve downward.

Then, check that the buoy and float of the inlet valve can move up and down. If it gets stuck, it can't enter the water. You need to adjust the orientation and check if it can be used.

4.Fill the toilet tank and see if the float can float freely up and down. If it floats freely, check if there is a problem with the drained float. If it is loose, it needs to be tightened. If damaged, it needs to be replaced with a new one.

5.Check that the button that flushes the toilet is still elastic. If it is used for a long time, the spring is easy to enter the water, it will rust, and the later use will also be affected.

2. How to protect the toilet?

1. The toilet bowl used daily should be protected to prevent wear and tear and affect daily use. And don't throw everything down the toilet, or it will easily clog up and not flush properly.

There are several reasons why the toilet does not get water:

1. First determine the water supply problem of tap water and angle valves and hoses.

2. The small filter screen inside the lower end of the valve body of the inlet valve is blocked.

3. The inlet valve has been adjusted by itself, resulting in improper adjustment.

4. The quality of the inlet valve itself.

You can open the toilet lid to check whether the float sinks to the bottom when the tank is empty, if it is still above when there is no water, it means that the float is broken, and it cannot sink and the upper water outlet is always closed, so there is no water.

You can also check whether the triangle valve is open, remove the triangle, check whether the end connected with the inner wire in the wall is blocked by the raw material belt, whether the valve core of the empty triangle valve is open and closed normally, whether the water hose is smooth, and the same kind of exclusion can be done.

What to do if the toilet tank is not watered, teach you a trick to save money and peace of mind, and solve the problem by yourself.

There is a filter inside the toilet water filler, and the filter will be blocked by too much limescale after being used for a long time, so that the tap water cannot come in. Just remove the strainer and clean it.

2. a piston. Open the lid of the toilet bowl and observe that there is no water on the tank. Whether the piston can be plugged. If it can't be plugged, it will leak, the water tank is not satisfied, and the switch can't reach, so it won't be watered.

3. Float. Open the toilet lid to check whether the float sinks to the bottom when the water tank is empty, if it is still above when there is no water, it means that the float is broken, and it cannot sink and the upper water outlet is always closed, so there is no water.

4. a water inlet valve.

Check if the toilet lid will reach the inlet valve, and if so, adjust the inlet valve. Then look at whether the float of the inlet valve will move up and down freely, because if it is stuck, the water will not be able to enter.

1. Open the main valve and see if it has tap water.

2. Open the lid of the water tank and observe that there is no water on the water tank. Whether the piston can be plugged. If you can't plug it, it will leak, and the water tank will not be able to reach if the switch is not enough, so it will not be watered.

3. Cover the toilet lid and check whether the button can reach the water inlet valve, if it is, adjust the orientation of the water inlet valve, and then see if the float or float of the water inlet valve can move up and down freely. If you get stuck, the water won't get in. Generally, there are adjustable crosseyes on the pontoons, and you can twist them in a clockwise direction to see.

If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked.

4. Fill the water tank with water to see if the pontoon can float freely. If the problem of water inlet is solved. Then there is the problem of drainage, which is also the problem of flushing. See if the plug of the plug in the tank, also called the float, is damaged. Whether the float and button connection are loose. If it is loose, it can be tightened.

5. Check whether the button Bichuna is elastic and regretful, and it is easy to rust when the spring enters the water for a long time.